Electronics Forum | Fri Jul 09 20:39:31 EDT 2010 | malcolmlanders
I have never placed a bga chip before and need to know some o0f the basics of how to do it. I am really intrested in how the stencil will work with the soider and if there is a special soider that i need to use. I usually use a leaded soider from man
Electronics Forum | Mon Aug 02 11:16:38 EDT 2010 | sdibuyer
Can anyone recommend a reputable / knowledgeable SMT expert in the Bay Area to work on a contract / consultant basis? 10-20 hours per week for 3 - 6 months. This person will assess solder joint health, drive DOEs to maximize results within existing c
Electronics Forum | Thu Aug 05 11:02:18 EDT 2010 | davef
Corrosion of soldering equipment!!! That would be the least of our concerns. Propyl Bromide has a flash point of 21*C [70*F]. It's not real stable. It's flammable. It's ready to go at room temperature. Have someone else operate those machines an
Electronics Forum | Fri Sep 17 16:44:56 EDT 2010 | rdubya
If your pads are long enough you shouldn't have a problem, the pins on the connector are curved up(away from pcb)and will plow solder paste to the end of the pad then it will wick back up the pin during reflow. if you have a second stencil for the bo
Electronics Forum | Mon Sep 20 06:29:27 EDT 2010 | darrenleebs
i have an old contact 3av pick and place machine that has started to display placement head position errors. the machine seems to start working if you switch it on and leave it for a couple of hours to warm up. has anybody had simillar issues with th
Electronics Forum | Sat Oct 02 06:26:51 EDT 2010 | patejl
Thanks for your feedback, both of you. But my problem is that we have high mix and low volume its obout 50-200 pieces. And we also have manual paste priter so the solder on the pad look always diferent. I believe that there is the problem but I cano
Electronics Forum | Tue Oct 05 16:53:31 EDT 2010 | loyrickie
Never seen, or worked on one of these machines. After turning the unit on and hitting f5 to return to origination, I receive error message "37- Head LOWER POS. SENSOR OFF!". I also have no service manual, just replacement parts catalog and operatio
Electronics Forum | Thu Oct 07 22:32:16 EDT 2010 | jeffr
I cannot offer a manual as a PDF, however I do have printed copies that could be photocopied. To be honest.. the manuals are little help as they are very Jap-English, anyway the Yamaha/Philips 66 is a simple machine that requires no real program trai
Electronics Forum | Mon Oct 25 14:15:50 EDT 2010 | duwelt
Hello, we just purchased a My12 machine. We now have to create every single package ourself - a very time consuming work. We asked our Mydata vendor if it is not possible to buy a package library to save time. He said, it is not possible - every comp
Electronics Forum | Fri Jan 14 15:36:15 EST 2011 | bdamico
Hello eadthem, MIRTEC sells a center board support for our desktop series. Please contact our office directly for more information regarding this option. I beleive that we might be able to offer you additional assistance with your side angle progr
