Electronics Forum | Wed Dec 18 15:00:17 EST 2002 | Chris Lampron
Good Day, We have been searching for ways to do this very thing. We have sent them out for cleaning in hot baths, ultrasonics, pressure wash, etc... The chains have come back cleaner than they left but not perfect. At one point, one of our engineers
Electronics Forum | Thu Dec 12 10:43:51 EST 2002 | Randy Villeneuve
Now the big question is how do they get the lead in the pencil? Don't answer that. Anyway now that we all know that there is no lead in the lead pencil (which we already knew) I still feel it is not good practice to use a lead (Graphite-clay) pencil
Electronics Forum | Thu Dec 12 00:36:11 EST 2002 | Frank
We had one of these years ago. We had trouble with it recognizing fiducials consistently, but other than that it ran good. This assumes that the left head, which is mechanical centering, is working good. And I believe that the minimum component
Electronics Forum | Tue Feb 10 13:58:43 EST 2004 | EHess
Scott, We have 2 Amistar Placepro 5620's and 2 5720's. One with a TF-14. I've personally been working on these for the past 10 years or so. Have a pretty good grasp of the process, if placepro's are what you are using. Glad to see Amistar is
Electronics Forum | Wed Feb 11 13:42:11 EST 2004 | fatally_phoenix
Scott, We have 2 Amistar Placepro 5620's > and 2 5720's. One with a TF-14. I've personally > been working on these for the past 10 years or > so. Have a pretty good grasp of the process, if > placepro's are what you are using. Glad to se
Electronics Forum | Sat Dec 14 18:40:29 EST 2002 | arzu
we are using aegis circuitca for manufacturing preparation. It works fine. we are a prototype center with small series of different cutomers.Our problem: keeping control over all components... Some are standard in house (used by other depertments as
Electronics Forum | Sat Dec 21 13:03:52 EST 2002 | V.RAMANAND KINI
Hi to all, All of us are familiar with the conventional way of making PCB...I mean...photo tools/expose/develop/etch/plate etc., These involve lots of chemicals and the work place is toxic. I have a small PCB with just two curves (circuit tracks)and
Electronics Forum | Wed Jan 01 11:03:31 EST 2003 | davef
We just use stare titanium stiffeners from the wave soldering area. Titanium is probably over-kill for your needs, but will work. Sources for titanium stiffeners are: * APT 603.622.1211 Tom Dimagio * New Era Technology 603.669.77971 Jessie Ward * B
Electronics Forum | Thu Jan 16 16:04:31 EST 2003 | MA/NY DDave
Hi Well I don't agree with Mr Fox. Cp and Cpk i.e Capabilitiy studies always yield good results and add vigor to the engineer and the process. You might want to hire a consultant or go to some classes to make sure you do this correctly for your si
Electronics Forum | Fri Jan 17 18:13:02 EST 2003 | MA/NY DDave
Hi I probably shouldn't say, Yet unless you are big or have some reoccuring kind of work with the government or ??, I wouldn't use the EMPF DaveF listed. They are now really the ACI (American Competitive Institute) and are not really the old EMPF
