Electronics Forum | Thu Sep 04 09:40:14 EDT 2014 | rgduval
I'm surprised MyData is pushing the service call. They're usually pretty good at walking you through some troubleshooting steps before going straight to the service call. So, the failure sounds like an encoder failure; the encoders are attached to
Electronics Forum | Mon Oct 13 09:22:14 EDT 2014 | rgduval
Deni, Thanks. I managed to do pretty much exactly that. I was able to get the changers to pop up, and check the vacuum on the nozzles. The first two nozzles are very well sealed into the changer (can't move them), but, the balance of the nozzles
Electronics Forum | Wed Nov 19 18:51:22 EST 2014 | warwolf
your summary is pretty accurate! yeah our justification on the automatic system is long in the pipeline. we would need significant volume even then we could just bump the staff numbers. I can see how you are having troubles with the legacy requirem
Electronics Forum | Mon Feb 16 12:33:58 EST 2015 | ianatvadatech
Hey Syed, I've been running the MV-9 for just over a year. We shopped around very extensively (two APEX shows) before switching from yestech to mirtec and we bought two of the best systems they had to cover the four lines we run. Two systems are fa
Electronics Forum | Mon Mar 09 12:52:38 EDT 2015 | brianbrl
Hi, I had Assembleon machines for many years, and worked through a total of nine of them. Three years ago we began to look at the short-comings we had, based on the machines capabilities. We started to look for a new SMT platform that could improve
Electronics Forum | Tue May 05 11:05:53 EDT 2015 | billmeye
Brian, thank you for taking time to discuss your buying experience, I read your link and it was very thorough. I also work for a small CEM using Mydata equipment. We have had Mydata going back to 1998 but truely are looking for something simpler. F
Electronics Forum | Tue Mar 31 09:22:48 EDT 2015 | rgduval
I've always hated using machine specs....they're always best case scenarios, and nearly never capture actual through-put rates. Personally, I don't like using first-piece rates, either...unless you're looking for worst case scenarios. Usually, the
Electronics Forum | Tue May 05 18:37:08 EDT 2015 | visionbot
Hi! I am Alexandru and I am a maker. Right now I am trying to build VisionBot which is a Surface Mount Technology assembly shooter that can be used to place SMD chips onto Printed Circuit Boards for PCBA. Practically the Vision Bot machine will ena
Electronics Forum | Tue May 19 02:25:56 EDT 2015 | alexeis
Hi, From experience of our customers, I can sum that Factory Logix NPI is so convenient and difficult to implement. Also, it is not optimized for each plant and have a lot of bugs. Therefore, I do not really recommend it. In addition, we got to mee
Electronics Forum | Thu Jun 11 05:36:28 EDT 2015 | jlawson
Valor MSS NPI is far more powerful than all the lower cost solutions, I had customer assess all their lower cost solutions and found no real added value, if want more than just SMT programming. NPI needs Stencil Optimisation , DFM analysis, DFT engi