Electronics Forum | Wed Oct 08 11:01:07 EDT 2008 | ck_the_flip
NEITHER AXI nor AOI are "stable" or "repeatable." If your false call rate is zero, then you've basically rendered the machine an expensive conveyor (ie it's passing everything 'cause you've opened the limits too much). You can *try* to do a Cpk or
Electronics Forum | Fri Jan 02 09:39:30 EST 2009 | angiewest
Adam, Our X-ray requirements are due to state requirements (WV 64CSR23) has a list 'Subjects for Instruction of Radiographer Trainees'the main headers are A. Fundamentals of Radiation Safety B. Radiation Detection Instrumentation to be Used C. The Re
Electronics Forum | Wed Feb 25 14:59:48 EST 2009 | vetteboy86
I have done a search related to x ray machines and found good data on why and when to buy. What I would like now is education on where and what to buy. Before we purchase, we plan on sending boards out to have this task performed, but when I talk to
Electronics Forum | Fri Sep 04 02:27:48 EDT 2009 | hurr
Hallo all, when I remove one from us malfunction BGAs from PCB I saw under X-ray inspection inner hairline crack.(see fig.1.) BGA was dried according to J-STD 033 and reflowed in lead process. When I look at new (baked BGA) under X-Ray inspection I
Electronics Forum | Thu Dec 17 18:08:41 EST 2009 | lynn_norman
Back in a former life, we had 3 products that were PCBs bonded to aluminum boards. We used a PSA from 3M to bond the board to the aluminum. Polymers are almost invisible in x-ray, but ultrasound worked quite well. You should try CSAM. Don't know
Electronics Forum | Fri Sep 03 06:53:38 EDT 2010 | arjan
Yes, we assembled a lot of QFN in the last years, but we don't have a X-ray machine by ourself, so we cant't inspect each device. This type LGA was designed on a prototyping board of our customer so we would validate our LGA reflow process and a rese
Electronics Forum | Mon Sep 13 22:32:41 EDT 2010 | genesan
Hi all good morning and need advice from expertise here. One of my customer complain that they have constantly issues with one of their product and ask us to do cross section.The report show there was “no wetting to the PCB copper pad” and cause the
Electronics Forum | Mon Sep 13 22:58:49 EDT 2010 | genesan
Hi all good morning and need advice from expertise here. One of my customer complain that they have constantly issues with one of their product and ask us to do cross section.The report show there was “no wetting to the PCB copper pad” and cause the
Electronics Forum | Fri Feb 22 18:36:36 EST 2013 | austinpeterman
Has anyone experienced bridging on topside (solder destination side) surface mount devices after wave soldering? We x-rayed 100% of the placements after smt re-flow with no issues. When the same placements were x-rayed after the tht wave solder pro
Electronics Forum | Fri May 23 23:45:38 EDT 2014 | edriansyah
Hi Evtimov. 1. yes both part and the process are lead free/RoHS 2. I ever did X-ray, the balls shape are good and I dont see any evident of head in pillow (but my x-ray machine is not too good) Head in pillow was also my first suspect. but after the
