Electronics Forum: x12 (Page 1 of 7)

GSM1 FEEDERS

Electronics Forum | Tue Jul 06 22:44:40 EDT 1999 | Dreamsniper

We got plenty of 16mmX12mm GSM1 Tape feeders that are not in use and we are short of 16mmX8mm Tape feeders. Is there a way to convert these 16mmX12mm into 16mmX8mm ? Thanks and Regards,

Re: GSM1 FEEDERS

Electronics Forum | Wed Jul 07 16:18:00 EDT 1999 | Thomas Nocpen

| We got plenty of 16mmX12mm GSM1 Tape feeders that are not in use and we are short of 16mmX8mm Tape feeders. | Is there a way to convert these 16mmX12mm into 16mmX8mm ? | | Thanks and Regards, | | I had the same issue and traded them in towards t

Lab & Low Volume Reflow oven

Electronics Forum | Fri Nov 13 09:58:46 EST 2009 | spitkis2

Dean, What sort of delta T are you getting on the 12" x 12" assembly?

MY12 F-MOT-MSETDYN x/12: Position Counter Dead

Electronics Forum | Wed Sep 03 15:18:12 EDT 2014 | chemers

I am looking for some help for where to look to fix this MY12 problem. We started the machine after the weekend and this error code comes up during initialization. F-MOT-MSETDYN X/12: Position counter dead MyData tells us our only option is to have

used component matrix trays

Electronics Forum | Thu Aug 27 14:04:44 EDT 2015 | ehess

does anyone know where used matrix trays could be purchased? Topline wants a ridiculous amount for them. Need to handle parts 16.2mm x 12.3mm x 2.31mm. REceived in T&R but need trays to bake out and then place.

feeders for siplace pick and place machines

Electronics Forum | Thu Jan 21 02:26:30 EST 2021 | baldoino

I would like to sell used pick and place feeders for Siplace. How can I offer them (70 x 8mm; 20 x 12/16; 05 x 24mm.

Please help! looking for cp6 fuji feeder!

Electronics Forum | Tue Aug 24 17:47:50 EDT 2010 | smtmax

I'm looking for CP6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm (KO=10.9mm) Please help! Thanks!

BGA Rework Equipment

Electronics Forum | Thu Jul 26 12:27:18 EDT 2001 | gdstanton

Bob, Try looking into the Sniper SMD-7007. We use it and it's pretty effective. They come with standard 16x12" CCA holders but they are larger sizes available as an option. The system costs about $35k. See attached web URL: http://www.apecorp.co

0201 Aperture design

Electronics Forum | Sat Oct 12 05:05:09 EDT 2002 | Kenture

I run 0201 on a 5 mils stencil with openting of 15X12 and did not have any issue. The major concern is the placement and CP643 did very good job. Type 3 solder pastes was used. Good luck.

MY12 F-MOT-MSETDYN x/12: Position Counter Dead

Electronics Forum | Fri Sep 05 09:42:41 EDT 2014 | cflames17

If you call service they can also walk you through the motor test. Ask for Glen. Al no longer works for MYDATA.

  1 2 3 4 5 6 7 Next

x12 searches for Companies, Equipment, Machines, Suppliers & Information