Electronics Forum | Fri Feb 16 04:15:57 EST 2018 | sachinverma
hi , please check the main S/w. of the Reflow machine.
Electronics Forum | Fri Jan 12 09:22:51 EST 2018 | dskling
Hello We have a Vitronics XPM820 that has us stumped. We have replaced both power supplies (G1 and G2) and we still cannot clear this alarm. The A1 board has all 4 leds light for proper voltages. We have verified that we are getting the correct vo
Electronics Forum | Fri Feb 03 16:55:20 EST 2017 | westshoredesign
We have 6 Vitronics Soltec ovens. 4 XPM 820's, an XPM 1240, and an XPM3. All of them are great, but we're very impressed with the XPM3, you can't go wrong.
Electronics Forum | Thu Oct 28 15:17:43 EDT 2004 | russ
I would look at Vitronics-Soltec such as the XPM 820 or even the 520. BTU also makes very nice ovens. The Hellers I used to use went through blowers every 6 mos. and both of them came it defective. You must have got lucky or I got unlucky. Russ
Electronics Forum | Wed Feb 14 15:49:30 EST 2018 | cbart
Did you check each leg alone to ensure you have proper incoming voltage to the machine on each individual line? any other 3 phase issues in the building? do you have a UPS for pc and conveyor purposes? is that failing?
Electronics Forum | Tue Jul 22 16:51:14 EDT 2008 | maxpower097
OK I have read though all the treads and learned more. One more question if someone can answer it. Can I do this myself on site? We have a Vitronics Soltec XPM820 Reflow Oven. Or do I need a super special oven for component baking.. Thanks max
Electronics Forum | Fri Jan 12 11:46:26 EST 2018 | emeto
I don't know this exact oven, but usually it goes like that: First is a three phase power, then it is a contactor that is switching the power for the heaters and fans. than there are transformers for lower voltages. then there might be UPS system in
Electronics Forum | Mon Jul 15 16:04:33 EDT 2024 | mistrthou
We're currently running a pair of XPM 820 Vitronics reflow ovens with a year 2000 vintage. I'm looking into either replacing both with used or one at a time new (and using the 2nd for spare parts). I priced a new delivered replacement from Vitronics
Electronics Forum | Tue Jul 22 20:47:21 EDT 2008 | davef
Q1. Can I do this myself on site? A1. Sure. Most companies demoisturate their components in-house. Q2. Can we use our Vitronics Soltec XPM820 Reflow Oven? A2. You can. Most of us would be using an oven like that in our product processing. If you look
Electronics Forum | Tue Jul 16 07:55:46 EDT 2024 | ginny
> We're currently running a pair of XPM 820 > Vitronics reflow ovens with a year 2000 vintage. > I'm looking into either replacing both with used > or one at a time new (and using the 2nd for spare > parts). I priced a new delivere
| 1 |
.gif)
