Electronics Forum | Mon Feb 13 00:11:19 EST 2006 | jeffr
I have YV100 manuals. Tell me the Serial number of the machine. There are several models: YV100-1, YV100-2, YV100XG, YV100X, YV100XT, YV100XTG. Do you also need spare parts? Reply to jr@hrltd.com.au
Electronics Forum | Tue May 18 09:58:17 EDT 2021 | kumarb
Thank you so much for the advice. We were suspecting blockage but know that we have clean nozzles. Did the air blow out and removed a spot of black matter - perhaps what was an old o-ring? Nozzles are 61 and 62 posing the issue. Our tech said that 64
Electronics Forum | Thu Dec 05 08:49:43 EST 2002 | pjc
Yamaha YV100Xg is the Topaz XII YV100X is Topaz X YV100II is Topaz YV88Xg is Emerald XII YV88X is Emerald X YVL88II is Emerald YV180Xg is Sapphire XII
Electronics Forum | Mon Mar 30 16:18:23 EDT 2020 | compit
Anyone know a company (probably Chinese) that has a lot of parts for the Topaz-X (Phlipips / Assembleon) / YV100X (Yamaha) head? Companies that I found have some parts, they don't, and I don't want to buy each item from another company (at least beca
Electronics Forum | Wed Nov 20 15:20:07 EST 2019 | compit
I formatted with the FORMAT / s command or moved the system with the SYS command - system files are visible. Partition created and active. I ordered the PCMCIA adapter (PCI) only today - USB adapters do not support all cards.
Electronics Forum | Wed Nov 20 15:25:26 EST 2019 | richardcargill
In our machinery, the pcmcia cards are simply Compact Flash cards in an adapter - not sure if this is always the case though
Electronics Forum | Wed Nov 20 11:54:43 EST 2019 | compit
I'm trying to make a spare disk for an SMT machine. I format the new PCMCIA card with the system (using the machine's DOS, 6.20) but when the computer starts it writes that I don't have a system. How I make a floppy disk in this way - it starts from
Electronics Forum | Wed Nov 20 15:03:27 EST 2019 | richardcargill
If you've formatted the pcmcia / CF card then it'll be blank and have no DOS or anything as it acts as the hard drive for the machine. A DOS diskette formatted with /S will boot from the floppy drive, then allowing software installation with the orig
Electronics Forum | Thu Sep 24 06:50:47 EDT 2015 | tercel
btw: Pots are VR16(x) and VR 17(y) on the left board and VR17(r) on the right board.
Electronics Forum | Wed Sep 23 08:29:19 EDT 2015 | tercel
Hi, I read about the problem "243 x drift adjustment no good" on a Philips CSM 60 (my type) and other machines of this type. I have the same problem but no manual for the machine to solve it. Do you still have the manual where the "Drift ajustment" i