Electronics Forum: yellow and flux (Page 1 of 36)

yellow residue

Electronics Forum | Tue Aug 22 18:15:50 EDT 2006 | russ

okay so both the 2005 formulas from interflux are clear alchol based fluxes. Yellow res huh? In looking at the temps here, I would say you might be too hot at both preheat and solder temp. You may be burning flux. How long is dwell time over wave

yellow residue

Electronics Forum | Tue Aug 22 13:55:44 EDT 2006 | Steve

Using no-clean flux going thru wave when comes out there is a bit of flux residue left on board. If wiped the residue shows a yellowish tint. Any ideas what this means how to get rid of it?

yellow residue

Electronics Forum | Tue Aug 22 15:37:22 EDT 2006 | russ

Sounds like a rosin flux. Is it sticky as well? Russ

yellow residue

Electronics Forum | Tue Aug 22 15:34:14 EDT 2006 | Chunks

Hi Steve, What type of flux? How do you apply it? What kind of wave? Rite off the cuff, I'd say you're applying too much flux, but without knowing a little more, it's tuff to say. It could even be board related. Hate to see what WML has to say

yellow residue

Electronics Forum | Tue Aug 22 21:11:10 EDT 2006 | davef

We agree with Russ. Your topside should be 100 - 130*C. Your 265*F is at the top of the range. Look here: http://www.interflux-electronics.com/Products/Fluxes/IF%202005M/TD%20IF%202005M.pdf#search=%22Interflux%20IF%202005%22

caps have yellow stain after wash

Electronics Forum | Tue Jun 07 12:07:30 EDT 2016 | wlsmt

Sorry davef. I was not being clear. PCBAs came out cold soldered after being reflowed the first time with ALPHA WS-820. The flux gel ALPHA WS 609 was supposed to be applied only onto the terminations of caps where ALPHA WS-820 was for a second refl

Lead-Free wave solder has yellow hue/tint

Electronics Forum | Thu Jul 10 13:02:18 EDT 2014 | clydestrum

I'm not sure what happened to my post, but we think to have got the situation under control. The solder joints on the boards looked terrible. I can only describe it as unburnt flux, maybe. (like if you took a spoonful of solder and sprayed flux direc

caps have yellow stain after wash

Electronics Forum | Wed Jun 15 10:38:41 EDT 2016 | laynefelix

Hi everyone..i am new here. I am hardware design engineer and as per my experience PCBAs came out cold soldered after being reflowed the first time with ALPHA WS-820. The flux gel ALPHA WS 609 was supposed to be applied only onto the terminations of

caps have yellow stain after wash

Electronics Forum | Mon Jun 06 12:51:17 EDT 2016 | wlsmt

My operator applied flux gel ALPHA WS-609 on MG P/N FTH101XAP (CAP ALUM 100UF 50V 20% SMD) before aqueous washing the PCBAs. Solder paste used was ALPHA WS-820. Now the caps have yellow stains. Any solution to this is appreciated. Tks

Solder and flux

Electronics Forum | Wed Oct 23 08:40:20 EDT 2002 | davef

Yer not making this easy. What kind of flux? If no-clean flux, what controls are you using to assure you are: * Applying the correct amount of flux? * Properly activating the flux? If water washable flux, talk to us about your cleaning methods and

  1 2 3 4 5 6 7 8 9 10 Next

yellow and flux searches for Companies, Equipment, Machines, Suppliers & Information

Win Source Online Electronic parts

Software for SMT placement & AOI - Free Download.
Fluid Dispensing, Staking, TIM, Solder Paste

Training online, at your facility, or at one of our worldwide training centers"
PCB Handling Machine with CE

Smt Feeder repair service centers in Europe, North, South America
IPC Training & Certification - Blackfox

Component Placement 101 Training Course
Voidless Reflow Soldering

Reflow Soldering 101 Training Course
Hot selling SMT spare parts and professional SMT machine solutions

Private label coffee for your company - your logo & message on each bag!