Electronics Forum | Fri Jul 19 10:45:55 EDT 2013 | kdc45
Have a Fuji IP-2 and the MTU has a servo alarm. There are three servo amp cards and the middle card is showing a 1 on the LED display. Does anyone know what this indicates? Also, can you tell me which axis this card is for? We do not have an advanced
Electronics Forum | Thu Jul 25 09:32:38 EDT 2013 | chris_flex
We have the same magazine-loaders. It´s not possible to stop the bottom conveyor. It`s hardcoded in the plc , you have to modify the plc-program to change this functionality. The instruction-manuals are also not generic as there are some different ve
Electronics Forum | Fri Jul 26 03:52:03 EDT 2013 | danyquintard
Hi We produce electronic pcboards for the aircraft industry. Some of our clients think that the thickness of the varnish left is proportional to the intensity of the blue color of uv's pigments in the varnish. Out off, we know that is not true. The
Electronics Forum | Mon Jul 29 15:30:45 EDT 2013 | markhoch
Nitrogen in Reflow is grossly over-rated...., in my opinion, and in the opinion of several very well known SMT Industry "God Fathers". Way too much $$$, for a slight increase in the process window. If you profile your oven specifically for your pr
Electronics Forum | Wed Jul 31 18:26:09 EDT 2013 | Jeff Kennedy
You might consider to contact a lab to Run a microindenter against a know good soft gold sample. The knoop value for the soft gold will be much lower than for hard gold. This would be reflected in the diameter measurement of the indented samples.Smal
Electronics Forum | Thu Aug 01 21:34:42 EDT 2013 | deanm
Techspray has a broad line of peelable solder masks. We use the Wondermask P for masking conformal coating as well. Call the company or rep to determine which product is best for you. I am not affiliated with Techspray in any way. If you get tired o
Electronics Forum | Wed Aug 07 16:06:26 EDT 2013 | rway
What type of filtering are you using? Your solder inspection should be using Histogram Inspection as the Decision and red filter for preprocess. Make sure your settings are correct and check your binarized image under Histogram setup. you should s
Electronics Forum | Thu Aug 08 19:20:08 EDT 2013 | hegemon
I too am hoping a NADCAP guy might jump in here. I would like to know how this portion of the question is handled. Evidence of PM, periodic cleaning of EQ and tools, no issues. Thermocouple calibration? You would think that evidence of Oven CAL
Electronics Forum | Tue Sep 10 14:27:12 EDT 2013 | ericrr
There is 8 nipples on the X-Y frame that is used to grease the frame, I was told these need to be greased often, as if the bearings go dry and break down it would cost big money to replace the bearing. (not sure how this price compares to other machi
Electronics Forum | Tue Sep 03 05:39:44 EDT 2013 | bobpan
Yes you can upload modcodes from assembler. This works for all quad c-series machines along with some others. I would NOT overwrite anything. I would save them to a new file so you have the originals. Your original modcodes are good.....your machine
