Electronics Forum | Wed Jan 28 08:40:07 EST 2004 | stefwitt
Joe, it does explain and it does not. You are either an University or you do production. If you want to jump on board and teach SMT production, I would go with Dave's recommendation. The machine vendor will happily supply you with sample boards, comp
Electronics Forum | Fri Feb 06 13:54:44 EST 2004 | greg
hi all does anyone of you have experience with new p&p Essemtec FLX1020/1030? what are the advantages and disadvantages in practice? how you evaluate Essemtec machines in production? if you can choose between Essemtec and other p&p machine for high
Electronics Forum | Thu Mar 04 20:15:51 EST 2004 | davef
Print paste in the holes you don't plan to use and let it dry. That way you don't affect your paste volume in other apertures. The bad news: When you don't want paste to dry and close your apertures, it will do it. When you want paste to dry and
Electronics Forum | Mon May 31 04:06:16 EDT 2004 | johnwnz
You know you'd think that wouldn't you but the only tiem I knew the vendor had changed something was when the silver started to fall off the boards!... you can tell I wasn't chuffed Now I have to say I do prefer Dunkin's to Krispy but I can't say I'
Electronics Forum | Mon Aug 08 06:17:09 EDT 2005 | Hi Steven
My suggest is using Ersa IR55A or IR650A. http://www.ersa.de/en/ If you looking for your quality, you need this system. I had try it many time, is better then hot air. and you can set the profile as you like, even Flat Peak on the Lead Free Rework.
Electronics Forum | Mon Aug 02 04:29:42 EDT 2004 | vinitverma
Hi Grant, You can visit http://www.assembleon.com and look at the videos of the A-series as also the FCM multiflex. If you need more info., just write to me at vinit.verma@prosemtechnology.com Hope you find this equipment interesting - you'll be am
Electronics Forum | Sun Apr 03 20:10:06 EDT 2005 | smtuser1234
You better get to know who the third party service companies are because Fuji just does not care about service they rely on their reputation. If you wanted good service you should have gone with Universal. When you compare machines now days all of th
Electronics Forum | Wed Jun 02 15:29:47 EDT 2004 | pr
Make sure the board is stopping at the center of the worknest or you will waste lots of time (you'll get software limit errors when you try to find fids.). If it's not in the center, you need to go in and reteach from scratch (doesn't take too long).
Electronics Forum | Sat Jul 24 04:02:18 EDT 2004 | kent_peterson
Two ways at it.You could just put the same nozzle for both the min and max.Or you could move the feeder into a location that has similar parts using the nozzle you want. With the feeder setup it should be optimized for the least amount of nozzle ch
Electronics Forum | Sat Jul 24 04:02:21 EDT 2004 | kent_peterson
Two ways at it.You could just put the same nozzle for both the min and max.Or you could move the feeder into a location that has similar parts using the nozzle you want. With the feeder setup it should be optimized for the least amount of nozzle ch
