Electronics Forum | Tue Jun 05 20:46:25 EDT 2007 | rfrog
I, too, have finished qualifying the Amtech paste for a dispensing application. We will be experimenting with the component soldering/stencil printing next. The stuff has proven to provide the best of both the no-clean/low solids and water washable
Electronics Forum | Mon Jun 04 18:23:41 EDT 2007 | greggc09
Patrick Q1) Is the test pattern similar to the IPC-B-25? A1) - No - Tests were run on a prototype assembly. Q2) what is the temperature in the test chamber and voltage supplied to the test coupons? A2) 25C with 3.3VDC. Q3) Does this test i
Electronics Forum | Fri Jun 08 15:37:41 EDT 2007 | ck_the_flip
Jim: I have limited knowledge, but here's what I know: 1. Yes, it's a standard process. In today's SMTNet, it's rarely mentioned, and few people reply to postings. 2. Nope. It's a "specialty" piece of equipment for most CEM's. Depending on you
Electronics Forum | Thu Jun 14 03:42:51 EDT 2007 | sami
Thank you Pavel for your interesting. Speaking on tact time ( machine speed per Board ), our Universal machines are too quick thank DEK machine, that's why I am thinking to add another machine in Glue process. FYI, we are working on Satellite receive
Electronics Forum | Thu Jun 14 08:30:53 EDT 2007 | pavel_murtishev
This solution is not as complicated as you might have thought. T-conveyor connected machines are widely used for applications requiring high material deposition throughput. This solution is made of: 1. Two independent screen printers 2. Two line loa
Electronics Forum | Thu Jun 21 12:20:29 EDT 2007 | rgirouard
Thanks for your input! Your ideas always help. The plan is to remove Captcha as part of the posting process for those members who have participated frequently. This will be in place next week. BTW, Dave can you give me any more info on Captcha no
Electronics Forum | Tue Jun 26 08:42:34 EDT 2007 | grantp
Hi, It's much better to add the cooler after the tank, as the tank will condense a lot of the water before it even hits the cooler and goes out. It's a much better system to have the tank between the compressor and then the cooler. The air also get
Electronics Forum | Tue Jul 10 11:49:20 EDT 2007 | samir
Parallelism tends to drift: �h After preventative maintenance �h From dross buildup or other obstruction clogging either wave Parallelism should at least be studied during the process characterization stage, so that you know your machine's process
Electronics Forum | Wed Jul 11 14:45:22 EDT 2007 | samir
ECD, KIC, or any mfgr. of thermal profiling devices will charge a premium for "simple stuff". For example, ECD charges a grand for their "flux-o-meter", which is just a PCB with a hole pattern, a pallet, and pH-sensitive paper. You can easily ma
Electronics Forum | Fri Jul 13 08:54:18 EDT 2007 | rgduval
Has your board house reviewed the PCB layer stack? Make sure that the layers are balanced in copper weight, etc? Have you tried pre-baking the boards? We just had an issue with some boards warping that have never warped before for us. It happened