Electronics Forum | Tue Aug 02 18:38:14 EDT 2022 | klauss
when i use only one nozzle to mounting 3535 cree power leds, it works good but when i use 2 or more nozzles, leds are getting rotated or upturned just after the nozzle relaese the led. it's like nozzle throws the led not mounts. But not all the led
Electronics Forum | Tue Aug 02 20:12:33 EDT 2022 | cbeneat
So these are XPE's? Are they CM402's or 602's? Are you using custom nozzles? We've had the same issues over the years. We've gotten our custom nozzles from Count on Tools, I actually have 10 new ones on the way. Slowing the placement speed, increasin
Electronics Forum | Wed Aug 03 13:04:04 EDT 2022 | proceng1
My initial thought is that the part is slightly delayed in releasing. When you are running one head, it doesn't matter. But when running multiple heads, the machine starts to move to the next placement before the part has fully released from the noz
Electronics Forum | Thu Sep 08 18:10:09 EDT 2022 | mt396596
We just went through a similar issue with our MY12E. Make sure your Midas vacuum system is working, check your Midas Z friction. Also verify the Centering unit centering band. You can swap your MOTZ and MOTC to rule out the card. The tool install t
Electronics Forum | Mon Sep 12 20:24:26 EDT 2022 | stephendo
I'll answer the easy part. If you put low temperature trays in the oven at 120C, they will warp and partially melt. I have seen it more often with reels of LEDs. Someone is told to bake them before use so the put them in the batch oven and the next
Electronics Forum | Mon Sep 12 22:50:52 EDT 2022 | superlen
Poly, I've seen the same error occur with our GI-14 when the glass scale encoder is simply dirty. If you bought the machines used, they could have been stored in fairly dirty environment. Just clean the glass scale. (use caution). We use lint free cl
Electronics Forum | Tue Sep 13 02:51:35 EDT 2022 | sarason
Lead and tin form a eutectic solution. So no to that one, as to breaking some rule or other other people who are far more knowledgeable than me on "the rules" could pipe in. Also tin/lead eutectics don't grow tin whiskers like a lot of the replacemen
Electronics Forum | Sat Sep 17 20:37:24 EDT 2022 | kumarb
Hi. About 2 years ago we designed a practice test board to confirm our understanding and capabilities of our YV88X PnP machine. We managed to place 01005 parts onto the PCB using a custom nozzle from Shenzhen. See attached - this is just one part of
Electronics Forum | Mon Oct 17 13:58:09 EDT 2022 | cyber_wolf
I would say not very reliable. The component separator spring, pick point adjustment, and magazine have to be perfect. Your nozzles have to be perfect etc..etc... My general advice is move to a different platform if possible. I have worked extensive
Electronics Forum | Wed Oct 19 17:39:51 EDT 2022 | rgduval
The Agilis feeders are much more reliable than the old TM feeders. You can tweak the TMs a little bit, but, it can be a pain. Agilis have better repeatability, and built in y axis correction for 0402 and smaller parts. On the newer machines (My se
