Electronics Forum | Tue Jan 28 12:30:20 EST 2020 | emeto
Spoilit.... If you will be the lowest bidder, make your own frame. I suggest metal frame with screws, cut just foil with holes and create the tension with hot air while screwing. You will end up with fraction of the price.
Electronics Forum | Wed Jan 29 09:53:39 EST 2020 | emeto
Spoilit... and Phil, it is your regular 29" frame, but it is thinner - 13mm is what I measured. For your vendor this is cheaper as they give you less metal, so usually these have lower price. I assume all stencil vendors will have it nowadays. No ne
Electronics Forum | Thu Jan 30 07:19:23 EST 2020 | dontfeedphils
I'd post an image of your current profile if you could. Have you tried a RTS profile instead of a RSS?
Electronics Forum | Wed Feb 19 11:21:18 EST 2020 | john_kim
Thank you for your advice Jer. BTW, may I ask the model name which you have used ? I'd like to buy and try it. Does it work well for the bridge underneath of components ? Regards, John
Electronics Forum | Wed Feb 12 12:58:09 EST 2020 | emeto
No to redesign, no to glue dispensing and no to pallets. Now you should change gravity ...or pray :) I am interested to see what other solution you can come up with.
Electronics Forum | Tue Mar 03 13:35:29 EST 2020 | emeto
So to sum up: you have no mechanical blockage, you have new motor and encoder. That leaves only two more parts(cable and Hydra Z-Controller).
Electronics Forum | Sat Apr 04 04:53:58 EDT 2020 | tima
Have you try doing initialization from service menu? Exit TPsys, type service -x and try to initialize only Hydra Z. See what error you get. Can be too much friction on the shaft. Run friction test
Electronics Forum | Mon Feb 24 17:02:45 EST 2020 | kylehunter
So do you guys really not like running oven's this large at 240V? Or do you just not like the two ovens specifically that I mentioned?
Electronics Forum | Tue Feb 25 17:15:08 EST 2020 | SMTA-Alex
All the TM feeders are obsolete. So, you won't find anything on them from Mycronic. The TM8FC is the one you want for 0402s.
Electronics Forum | Thu Apr 30 02:09:50 EDT 2020 | bukas
Thank you for you reply yernie. This forum is about industrial electronics assembly machines and technologies and not about smartphones. btw, the problem was IF board if anyone was wondering.
