Electronics Forum: z height (Page 1 of 18)

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Wed Jan 23 11:47:30 EST 2019 | palsrvs

Sorry, No solution was ever found.

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Mon Jun 12 11:14:10 EDT 2017 | bobpan

Sounds to me like the z-encoder could be a problem. I cant remember but you may be able to disable a head in the system settings. Bob

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Fri Jun 09 07:32:13 EDT 2017 | bukas

it sounds to me like a home sensor. try adjusting sensitivity if possible. move head manually to determine position at which home sensor is activated

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Wed Jun 21 21:28:34 EDT 2017 | maddy

Hi We had same issue with Head 2.if you find solution let me know as well. thanks

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Wed Jan 23 07:42:34 EST 2019 | rolfi

Hi, we had the same issue with our CP30V and head1. Did you solve the problem? Please let me know as well. Thank you.

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Thu Jan 24 09:09:46 EST 2019 | protokos

Hi Kathy i had the same issue yesterday and find that a spring is not ok. and i also clean the sensors this was fixing the problem for me.

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Thu Jan 24 12:09:08 EST 2019 | palsrvs

Wil, Thank you so much! So appreciated!! The spring makes sense. We will check these items.

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Thu Jun 08 22:54:57 EDT 2017 | palsrvs

Hoping to get help on our Samsung CP40. We are trying figure out what part to replace for a Z height motor alarm detected Error Code 1523. Originally Head 1 was having this error. Swapped out I/O board and Z-Axis control for head one and same error s

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Mon Jun 12 21:16:41 EDT 2017 | kahrpr

you can not just take the motor off and change it. the motors have a home pulse singnial. the motor has to be in a certian position the home pulse position when the flag hits the sensor. When you remove the motor you have to mark the motor gear when

SAMSUNG nozzles

Electronics Forum | Wed May 25 13:02:57 EDT 2005 | jsloot

I have two Samsung machines running about 500 hours a month each. Placement rate is on the average 12,000 CPH between the two. The life expectancy of the nozzles used on 1206 packages seems rather short to me. It was about 2 months ago I replaced the

  1 2 3 4 5 6 7 8 9 10 Next

z height searches for Companies, Equipment, Machines, Suppliers & Information