Electronics Manufacturing Training

Technical Articles From Georgia Institute of Technology

Read technical articles about electronics manufacturing added by Georgia Institute of Technology

7 technical articles added by Georgia Institute of Technology

Company Information:

Center for Board Assembly Research CBAR- advanced research on board assembly processes and systems

Atlanta, Georgia, USA

Research Institute / Laboratory / School

  • Phone 404-385-1053

See Company Website »

Company Postings:

(7) technical library articles

Additively Manufactured mm-Wave Multichip Modules With Fully Printed "Smart" Encapsulation Structures

Feb 09, 2022 | Xuanke He, Bijan K. Tehrani, Ryan Bahr, Wenjing Su, and Manos M. Tentzeris

This article presents the first time that an millimeter-wave (mm-wave) multichip module (MCM) with on-demand "smart" encapsulation has been fabricated utilizing additive manufacturing technologies. RF and dc interconnects were fabricated using inkjet printing, while the encapsulation was realized using 3-D printing. Inkjet-printed interconnects feature superior RF performance, better mechanical reliability, and on-demand, low-cost fabrication process....

All-in-One, Wireless, Stretchable Hybrid Electronics for Smart, Connected, and Ambulatory Physiological Monitoring

Aug 19, 2020 | Yun-Soung Kim, Musa Mahmood, Yongkuk Lee, Nam Kyun Kim, Shinjae Kwon, Robert Herbert, Donghyun Kim, Hee Cheol Cho,* and Woon-Hong Yeo*

Commercially available health monitors rely on rigid electronic housing coupled with aggressive adhesives and conductive gels, causing discomfort and inducing skin damage. Also, research-level skin-wearable devices, while excelling in some aspects, fall short as concept-only presentations due to the fundamental challenges of active wireless communication and integration as a single device platform. Here, an all-in-one, wireless, stretchable hybrid electronics with key capabilities for real-time physiological monitoring, automatic detection of signal abnormality via deep-learning, and a long-range wireless connectivity (up to 15 m) is introduced. The strategic integration of thin-film electronic layers with hyperelastic elastomers allows the overall device to adhere and deform naturally with the human body while maintaining the functionalities of the on-board electronics. The stretchable electrodes with optimized structures for intimate skin contact are capable of generating clinical-grade electrocardiograms and accurate analysis of heart and respiratory rates while the motion sensor assesses physical activities. Implementation of convolutional neural networks for real-time physiological classifications demonstrates the feasibility of multifaceted analysis with a high clinical relevance. Finally, in vivo demonstrations with animals and human subjects in various scenarios reveal the versatility of the device as both a health monitor and a viable research tool....

Additive Manufacturing for Next Generation Microwave Electronics and Antennas

Aug 13, 2020 | Xuanke He, Bijan K. Tehrani, Ryan A. Bahr, Manos Tentzeris

The paper will discuss the integration of 3D printing and inkjet printing fabrication technologies for microwave and millimeter-wave applications. With the recent advancements in 3D and inkjet printing technology, achieving resolution down to 50 um, it is feasible to fabricate electronic components and antennas operating in the millimeter-wave regime. The nature of additive manufacturing allows designers to create custom components and devices for specialized applications and provides an excellent and inexpensive way of prototyping electronic designs. The combination of multiple printable materials enables the vertical integration of conductive, dielectric, and semi-conductive materials which are the fundamental components of passive and active circuit elements such as inductors, capacitors, diodes, and transistors. Also, the on-demand manner of printing can eliminate the use of subtractive fabrication processes, which are necessary for conventional microfabrication processes such as photolithography, and drastically reduce the cost and material waste of fabrication....

Soft, Wireless Periocular Wearable Electronics For Real-Time Detection Of Eye Vergence In A Virtual Reality Toward Mobile Eye Therapies

Jul 22, 2020 | Saswat Mishra et al

Recent advancements in electronic packaging and image processing techniques have opened the possibility for optics-based portable eye tracking approaches, but technical and safety hurdles limit safe implementation toward wearable applications. Here, we introduce a fully wearable, wireless soft electronic system that offers a portable, highly sensitive tracking of eye movements (vergence) via the combination of skin-conformal sensors and a virtual reality system. Advancement of material processing and printing technologies based on aerosol jet printing enables reliable manufacturing of skin-like sensors, while the flexible hybrid circuit based on elastomer and chip integration allows comfortable integration with a user's head. Analytical and computational study of a data classification algorithm provides a highly accurate tool for real-time detection and classification of ocular motions. In vivo demonstration with 14 human subjects captures the potential of the wearable electronics as a portable therapy system, whose minimized form factor facilitates seamless interplay with traditional wearable hardware....

Smart and Connected Bioelectronics for Seamless Health Monitoring and Persistent Human-Machine Interfaces

Jun 10, 2020 | Yun-Soung Kim and Woon-Hong Yeo

Recent advancement of flexible wearable electronics allows significant enhancement of portable, continuous health monitoring and persistent human-machine interfaces. Enabled by flexible electronic systems, smart and connected bioelectronics are accelerating the integration of innovative information science and engineering strategies, ultimately driving the rapid transformation of healthcare and medicine. Recent progress in the development and engineering of soft materials has provided various opportunities to design different types of mechanically deformable systems towards smart and connected bioelectronics....

High Frequency Electrical Performance and Thermo-Mechanical Reliability of Fine-Pitch, Copper - Metallized Through-Package-Vias (TPVs) in Ultra - thin Glass Interposers

Aug 10, 2017 | Sukhadha Viswanathan, Tomonori Ogawa, Kaya Demir, Timothy B. Huang, P. Markondeya Raj, Fuhan Liu, Venky Sundaram, Rao Tummala

This paper demonstrates the high frequency performance and thermo-mechanical reliability of through vias with 25 μm diameter at 50 μm pitch in 100 μm thin glass substrates. Scaling of through via interconnect diameter and pitch has several electrical performance advantages for high bandwidth 2.5D interposers as well as mm-wave components for 5G modules....

Modeling and Control of SMT Manufacturing Lines Using Hybrid Dynamic Systems

Apr 05, 2012 | L.G. Barajas, A. Kansal, A. Saxena, M. Egerstedt, A. Goldstein, E.W. Kamen

In this paper we show how hybrid control and modeling tech-niques can be put to work for solving a problem of industrial relevance in Surface Mount Technology (SMT) manufacturing. In particular, by closing the loop over the stencil printing process, we ob...

Benchtop Fluid Dispenser

Reflow Oven