Electronics Manufacturing Training

Technical Articles From Foundry Research Institute

Read technical articles about electronics manufacturing added by Foundry Research Institute


1 technical article added by Foundry Research Institute

Company Information:

Foundry Research Institute

Łukasiewicz - Kraków Institute of Technology was established on April 1, 2020 as a result of the merger of two Kraków institutes that are part of the Łukasiewicz Research Network.

Cracow, Poland

Research Institute / Laboratory / School

  • Phone +48 12 26 18 324

Foundry Research Institute website

Company Postings:

(1) technical library article

Effects of PCB Substrate Surface Finish and Flux on Solderability of Lead-Free SAC305 Alloy

Oct 20, 2021 | A. Siewiorek, A. Kudyba, N. Sobczak, M. Homa, Z. Huber, Z. Adamek, and J. Wojewoda-Budka

The solderability of the SAC305 alloy in contact with printed circuit boards (PCB) having different surface finishes was examined using the wetting balance method. The study was performed at a temperature of 260 _C on three types of PCBs covered with (1) hot air solder leveling (HASL LF), (2) electroless nickel immersion gold (ENIG), and (3) organic surface protectant (OSP), organic finish, all on Cu substrates and two types of fluxes (EF2202 and RF800). The results showed that the PCB substrate surface finish has a strong effect on the value of both the wetting time t0 and the contact angle h. The shortest wetting time was noted for the OSP finish (t0 = 0.6 s with EF2202 flux and t0 = 0.98 s with RF800 flux), while the ENIG finish showed the longest wetting time (t0 = 1.36 s with EF2202 flux and t0 = 1.55 s with RF800 flux). The h values calculated from the wetting balance tests were as follows: the lowest h of 45_ was formed on HASL LF (EF2202 flux), the highest h of 63_ was noted on the OSP finish, while on the ENIG finish, it was 58_ (EF2202 flux). After the solderability tests, the interface characterization of cross-sectional samples was performed by means of scanning electron microscopy coupled with energy dispersive spectroscopy....

fluid dispensing pumps for integration

ICT Total SMT line Provider