HALT Testing of Backward Soldered BGAs on a Military Product

Published:

November 19, 2015

Author:

B. Gumpert, B. Fox, L. Woody

Abstract:

The move to lead free (Pb-free) electronics by the commercial industry has resulted in an increasing number of ball grid array components (BGAs) which are only available with Pb-free solder balls. The reliability of these devices is not well established when assembled using a standard tin-lead (SnPb) solder paste and reflow profile, known as a backward compatible process. Previous studies in processing mixed alloy solder joints have demonstrated the importance of using a reflow temperature high enough to achieve complete mixing of the SnPb solder paste with the Pb-free solder ball. Research has indicated that complete mixing can occur below the melting point of the Pb-free alloy and is dependent on a number of factors including solder ball composition, solder ball to solder paste ratio, and peak reflow times and temperatures. Increasing the lead content in the system enables full mixing of the solder joint with a reduced peak reflow temperature, however, previous research is conflicting regarding the effect that lead percentage has on solder joint reliability in this mixed alloy solder joint....

  • Download HALT Testing of Backward Soldered BGAs on a Military Product article
  • To read this article you need to have Adobe PDF installed

You must be a registered user to talk back to us.

 
Company Information:

Lockheed Martin Corporation

Lockheed Martin is a global security and aerospace company that employs about 112,000 people worldwide and is principally engaged in the research, design, development and manufacturing of advanced technology systems.

Bethesda, Maryland, USA

Other

  • Phone 301-897-6000
  • Fax 612-456-2193

Lockheed Martin Corporation website

Company Postings:

(3) technical library articles

  • Feb 20, 2021 - Humitector™ Type 2 Non-Reversible Humidity Indicator Cards from Clariant help assure the integrity of moisture-sensitive surface-mount devices | Clariant Cargo & Device Protection
  • Jan 03, 2021 - Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP and Flip Chip Technologies | SMTnet
  • Dec 07, 2020 - A Non-destructive Approach to Identify Intermittent Failure Locations on Printed Circuit Cards (PCC) that have been Temperature Cycle Tested | ACI Technologies, Inc.
  • Dec 02, 2020 - SMT007-MIRTEC Intelligent Factory Automation Article-November 2020 | MIRTEC Corp
  • Nov 09, 2020 - Ball Grid Array (BGA) Voiding Affecting Functionality | ACI Technologies, Inc.
  • Browse Technical Library »

HALT Testing of Backward Soldered BGAs on a Military Product article has been viewed 433 times

Voidless Reflow Soldering

Webinars Knowledge you Need