Investigation of Cutting Quality and Mitigation Methods for Laser Depaneling of Printed Circuit Boards
Published: |
September 11, 2019 |
Author: |
Ahne Oosterhof, Eastwood Consulting, Javier Gonzalez, LPKF Laser & Electronics AG |
Abstract: |
There are numerous techniques to singulate printed circuit boards after assembly including break-out, routing, wheel cutting and now laser cutting. Lasers have several desirable advantages such as very narrow kerf widths as well as virtually no dust, no mechanical stress, visual pattern recognition and fast set-up changes. The very narrow kerf width resulting from laser ablation and the very tight tolerance of the cutting path placement allows for more usable space on the panel. However, the energy used in the laser cutting process can also create unwanted products on the cut walls as a result of the direct laser ablation. The question raised often is: What are these products, and how far can the creation of such products be mitigated through variation of the laser cutting process, laser parameters and material handling? This paper discusses the type and quantity of the products found on sidewalls of laser depaneled circuit boards and it quantifies the results through measurements of breakdown voltage, as well as electrical impedance. Further this paper discusses mitigation strategies to prevent or limit the amount of change in surface quality as a result of the laser cutting process. Depending on the final application of the circuit board it may prompt a need for proper specification of the expected results in terms of cut surface quality. This in turn will impact the placement of runs and components during layout. It will assist designers and engineers in defining these parameters sufficiently in order to have a predictable quality of the circuit boards after depaneling.... |
You must be a registered user to talk back to us. |
Company Information:
More articles from LPKF Laser & Electronics »
- Apr 27, 2017 - Material Effects of Laser Energy When Processing Circuit Board Substrates during Depaneling
- Feb 22, 2013 - Bringing Rapid Prototyping In-House - A White Paper for RF/Microwave Executives
- See all SMT / PCB technical articles from LPKF Laser & Electronics »
More SMT / PCB assembly technical articles »
- Feb 26, 2024 - Precision Control in Electronic Assembly: Selective Wave Soldering Machine | I.C.T ( Dongguan ICT Technology Co., Ltd. )
- Feb 02, 2024 - Maximizing Efficiency: The High-Speed SMT Line With Laser Depanelizer | I.C.T ( Dongguan ICT Technology Co., Ltd. )
- Dec 27, 2023 - Revolutionizing Tech: SMT Auto IC Programming Machine Mastery | I.C.T ( Dongguan ICT Technology Co., Ltd. )
- Dec 18, 2023 - Revolutionize PCB Manufacturing with SMT Dispensing Machines | I.C.T ( Dongguan ICT Technology Co., Ltd. )
- Dec 15, 2023 - SMT Printing Collapse Causes and Countermeasures --KINGSUN | DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD
- Browse Technical Library »
Investigation of Cutting Quality and Mitigation Methods for Laser Depaneling of Printed Circuit Boards article has been viewed 889 times