• SMTnet
  • »
  • Technical Library
  • »
  • How Clean is Clean Enough – At What Level Does Each of The Individual Contaminates Cause Leakage and Corrosion Failures in SIR?

How Clean is Clean Enough – At What Level Does Each of The Individual Contaminates Cause Leakage and Corrosion Failures in SIR?

Published:

September 8, 2016

Author:

Terry Munson, Paco Solis, Nick Munson, Steve Ring, Evan Briscoe.

Abstract:

In this investigation a test matrix was completed utilizing 900 electrodes (small circuit board with parallel copper traces on FR-4 with LPI soldermask at 6, 10 and 50 mil spacing): 12 ionic contaminants were applied in five concentrations to three different spaced electrodes with five replicas each (three different bare copper trace spacing / five replications of each with five levels of ionic concentration). The investigation was to assess the electrical response under controlled heat and humidity conditions of the known applied contamination to electrodes, using the IPC SIR (surface insulation resistance) J-STD 001 limits and determine at what level of contamination and spacing the ionic / organic residue has a failing effect on SIR....

  • Download How Clean is Clean Enough – At What Level Does Each of The Individual Contaminates Cause Leakage and Corrosion Failures in SIR? article
  • To read this article you need to have Adobe PDF installed

You must be a registered user to talk back to us.

 
Company Information:

Foresite Inc.

Foresite is a process consulting house and analytial laboratory dedicated to solving product reliability challenges for electronics manufacturers.

Kokomo, Indiana, USA

Cleaning, Consultant, Service Provider, Test Services

  • Phone (765)457-8095
  • Fax (765)457-9033

Foresite Inc. website

Company Postings:

(3) technical library articles

(1) news release

  • Feb 20, 2021 - Humitector™ Type 2 Non-Reversible Humidity Indicator Cards from Clariant help assure the integrity of moisture-sensitive surface-mount devices | Clariant Cargo & Device Protection
  • Jan 03, 2021 - Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP and Flip Chip Technologies | SMTnet
  • Dec 07, 2020 - A Non-destructive Approach to Identify Intermittent Failure Locations on Printed Circuit Cards (PCC) that have been Temperature Cycle Tested | ACI Technologies, Inc.
  • Dec 02, 2020 - SMT007-MIRTEC Intelligent Factory Automation Article-November 2020 | MIRTEC Corp
  • Nov 09, 2020 - Ball Grid Array (BGA) Voiding Affecting Functionality | ACI Technologies, Inc.
  • Browse Technical Library »

How Clean is Clean Enough – At What Level Does Each of The Individual Contaminates Cause Leakage and Corrosion Failures in SIR? article has been viewed 535 times

  • SMTnet
  • »
  • Technical Library
  • »
  • How Clean is Clean Enough – At What Level Does Each of The Individual Contaminates Cause Leakage and Corrosion Failures in SIR?
 Reflow System

Jet Printing and Cleaning Challenges