Electrochemical Sensors For Nitrogen Species: A Review

Published:

February 17, 2021

Author:

Heejeong Ryua, Dorian Thompson, Yuankai Huang, BaikunLi, Yu Leia

Abstract:

This review provides an overview of electrochemical sensors for nitrogen species, especially, ammonium, nitrate, and nitrite. Due to the extensive anthropogenic activities, the concentration of nitrogen species has been dramatically increased in the environment. In particular, fertilizers containing ammonium and nitrate have been extensively used in agriculture where as nitrite-included additives or preservatives have been used in food industry. Since excessive nitrogen species have an adverse effect to environment and human health such as eutrophication and methemoglobinemia (blue baby syndrome), efforts have been made to develop efficient monitoring methods. On that account, the U.S Environmental Protection Agency (EPA) established the maximum contaminant level (MCL) for nitrate and nitrite to be 10mg/L nitrate-N and 1mg/L nitrite-N in drinking water, respectively. Typical analytical methods for nitrogen species are chromatography or spectrometry. However, these methods require expensive instrumentations, skilled operator, and considerable sample pretreatment and analysis time. As an alternative approach, electrochemical sensors have been explored to monitor nitrogen species owing to its simplicity, superior sensitivity, versatility, rapidity, field applicability, and selectivity. In this review, electrochemical based detection methods for nitrogen species especially ammonium, nitrate and nitrite are systematically discussed, including the fundamentals of electrochemical techniques, sensing mechanisms, and the performance of each sensor. doi.org/10.1016/j.snr.2020.100022...

  • Download Electrochemical Sensors For Nitrogen Species: A Review article
  • To read this article you need to have Adobe PDF installed

You must be a registered user to talk back to us.

 
Company Information:

University of Connecticut

The University of Connecticut is a public land-grant research university in Storrs, Connecticut. It was founded in 1881. The primary 4,400-acre campus is in Storrs, Connecticut, approximately a half hour's drive from Hartford and

Storrs, Connecticut, USA

School

  • Phone (860) 486-4900

University of Connecticut website

Company Postings:

(1) technical library article

  • Feb 20, 2021 - Humitector™ Type 2 Non-Reversible Humidity Indicator Cards from Clariant help assure the integrity of moisture-sensitive surface-mount devices | Clariant Cargo & Device Protection
  • Jan 03, 2021 - Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP and Flip Chip Technologies | SMTnet
  • Dec 07, 2020 - A Non-destructive Approach to Identify Intermittent Failure Locations on Printed Circuit Cards (PCC) that have been Temperature Cycle Tested | ACI Technologies, Inc.
  • Dec 02, 2020 - SMT007-MIRTEC Intelligent Factory Automation Article-November 2020 | MIRTEC Corp
  • Nov 09, 2020 - Ball Grid Array (BGA) Voiding Affecting Functionality | ACI Technologies, Inc.
  • Browse Technical Library »

Electrochemical Sensors For Nitrogen Species: A Review article has been viewed 96 times

High Precision SMT Fluid Dispensers

Industry 4.0 Reflow Oven