Nordson Asymtek ds-s-820

Model:	Nordson Asymtek ds-s-820
Category:	Semiconductor & Solar
Condition:	used
Location:	Netherlands
Offered by:	Fix Trade BV
	Contact Supplier

Precision Batch Semiconductor Dispenser by Nordson Asymtek, as new.

Nordson Asymtek DS-S-820 product information.

Motion System
Type: Brushless DC servo motors, closedloop
with precision encoder
feedback
Encoder resolution: 10 microns
X-Y acceleration: 0.25 g peak with S-curve jerk control
Placement accuracy: ±100 µm (0.004 in.), 3 sigma
X-Y repeatability: ±25 µm (0.001 in.)
Z-axis repeatability: ±25 µm (0.001 in.)
Z-travel: 75 mm (3.0 in.)

Dispense Area (1)
350 x 350 mm (14.0 x 14.0 in.)

Payload
Tool (z-axis): 3 kg (6.6 lbs)
Workpiece: 2 kg (4.4 lbs)

Vision and Lighting
Vision: Vision system with Automatic
Pattern Recognition
Lighting: Programmable, on-axis, red/blue
LED, 255 light levels

Computer
Windows-based laptop PC with mouse

Software
User environment: Fluidmove® for Windows XP
Operating system: Windows XP

Fluid Delivery Method
DispenseJet®: DJ-9000, DJ-9500
NexJet™ System: NJ-7
Auger pump: Heli-flow® DV-7000, DV-8000
Valve: DV-01B, DV-02, DV-03, DV-05,
DV-07, DV-09, SV-100

Facilities Requirements
System footprint: 866 mm wide x 1123 mm deep
(34.0 x 44.0 in.)
Display: Extends 610 mm (24 in.)
Height: 2045 mm (80.5 in.) with light beacon
Complete dimensional diagrams are on the next page.
Air supply: 85 liters/min, 620 kPA
(3 CFM @ 90 psi)
Note: may be higher depending upon application.
Power: 200/240 VAC, 10 amps (max),
50/60 Hz, single phase
Weight: 364 kg (802 lbs)

Other Standard Features:
Advanced process control modules:
Mass flow calibration (MFC)
Calibrated process jetting (CPJ)
Jet-on-the-Fly (JOF)
Dynamic Dispense Control (DDC)
Heated vacuum tooling plate with programmable setpoints
350 x 350 mm (14.0 x 14.0 in.)
Light beacon with audible alarm
Low air pressure alarm with programmable setpoint
Mechanical tactile height sensor
Needle heater control with programmable setpoints
Precision air regulators
Vacuum purge station