SMT & PCB Assembly Equipment

Rohde & Schwarz CMW500

Rohde & Schwarz CMW500

Rohde & Schwarz CMW500

Model:

Rohde & Schwarz CMW500

Category:

In-Circuit Testers

Condition:

used

Location:

USA

Offered by:

Test Equipment Connection

Rohde & Schwarz CMW500 loaded with options

Wideband Radio Communication Tester

Rohde & Schwarz CMW500 with the following options.

Hardware Options: B110-B200-B210-B220-B230-B300-B510-B612B-B620A-B660-B661

Software Options: KA100-KA150-KM050-KM400-KM401-KM403-KM500-KM800 -KM880 -KS400 -KS401-KS403-KS500-KS510-KS520-KS800-KS810-KS880-KS890

The R&S CMW500 is the perfect test instrument to provide signaling test solutions for 3GPP standards like LTE, WCDMA, GSM as well as CDMA2000®1xRTT and CDMA2000®1xEV-DO, as it enables developers of wireless devices with a radio access network simulation.

The signaling protocol tester can be used for early R&D for layer 1 (physical) up to layer 3 (and higher) full stack tests including inter-RAT and multicell as well as for signaling conformance tests based on 3GPP specification. Powerful protocol analysis tools accelerate error finding and log post processing.

The R&S CMW500 marks the entry of a new generation of test equipment from Rohde & Schwarz for fast and precise production of current and future wireless devices.

The R&S Smart Alignment high-speed test concept plus the all-in-one architecture with integrated vector signal generator and analyzer are the prerequisites for state-of-the-art non-signaling alignment approaches.

The extreme scalability, test speed, and measurement accuracy of the R&S CMW500 are the assurance for minimum test costs..

Features:

    Multi technology solution: GSM / GPRS / EDGE / WCDMA / mobile WiMAX / CDMA2000 / TD-SCDMA / LTE

    Base model: general-purpose RF power meter and CW generator with List modes for fast calibration of wireless devices

    Vector Signal Analyzer (VSA) for transmitter verification

    Vector Signal Generator (VSG) for expanded receiver testing: ARB mode for short setup times or realtime mode for complex signals with high data volume

    Reference RF power measurements with direct connection for R&S NRP power sensors

    Easy connection to wireless devices with complex RF architecture using the integrated RF interface

    State-of-the-art Graphical User Interface (GUI)

    SCPI remote control via LAN/GPIB interface

    Ready for LXI Class C

    Process controller with Windows XP operating system for test routines and remote control via Windows Remote Desktop

Popular R&D and production test solution for many smart wireless products such as mobile phones, laptops and tablets.

R&S CMW500 Option List (at additional cost):

B100A = Baseband Measurement Unit, CMW module H100A

B110A = ARB + Realtime Baseband Generator Module

B200A = Signaling Unit Universal, GSM/CDMA2000/1xEV-DO

B210A GSM/GPRS/EDGE Signaling Extension Module

B220A = CDMA2000 1xRTT signaling module

B230A = CDMA2000 1xEV-DO signaling module

B300A = Signaling Unit, Wideband (SUW)

B450A = Data application unit

B510A = Four digital IQ interface

B570B = Extra RF Converter (TRX)

B590A = Extra RF front end, basic

B612A = IEEE Bus Interface Module (single connector)

B620A = Digital video interface

B660A = Option carrier

B661A = Ethernet switch

B690A = OCXO, basic stability

KA100 = Enabling of IP-Data interface for IPV4

KA150 = Extension of IP-Data interface for IPV6

KAC10 = LTE conformance test

KAF10 = VoLTE

KB036 = Extended frequency range, 3.3GHz to 6GHz, per RF converter

KM011 =TX measurement, IQ Versus Slot (software license)

KM012 = TX measurement, Multi Evaluation List Mode / MELM

KM050 = IP based measurements

KM200 = TX Measurement, GSM/GPRS/EDGE, Uplink

KM201 = TX Measurement, EDGE Evolution Extension of KM200 Uplink

KM400 = TX Measurement, WCDMA, Uplink

KM401 = TX Measurement, WCDMA HSPA Extension of KM400, Uplink

KM403 = TX Measurement, WCDMA HSPA+ Extension of KM401, Uplink

KM500 = TX Measurement, LTE FDD Release 8

KM550 = TX Measurement, LTE TDD (TD-LTE) Release 8

KM650 = TX measurement, WLAN IEEE 802.11a/b/g

KM651 = TX measurement, WLAN IEEE 802.11n SISO

KM700 = TX measurement, WiMAX# IEEE 802.16e

KM750 = TX measurement, TD-SCDMA uplink

KM800 = TX measurement CDMA2000 1xRTT reverse link

KM880 = TX measurement CDMA2000 1xEV-DO Revision 0/A/B reverse link

KS200 = Signaling (network emulation), GSM/GPRS/EDGE

KS201 = Signaling (network emulation), GSM Release 7 EDGE Evolution

KS203 = Signaling (network emulation), GSM Release 9 VAMOS

KS210 = Signaling (network emulation), GSM GPRS EDGE Release 6,

KS400 = Signaling (network emulation), WCDMA Release 99

KS401 = Signaling (network emulation), WCDMA Release 5/6 HSPA

KS403 = Signaling (network emulation), WCDMA Release 7 HSPA+, SISO

KS404 = Signaling (network emulation), WCDMA Release 8

KS410 = Signaling (network emulation), WCDMA Release 99

KS411 = Signaling (network emulation), WCDMA Release 5/6 HSPA

KS500 = Signaling (network emulation), LTE FDD Release 8, SISO

KS510 = Signaling (network emulation), LTE Release 8, SISO

KS520 = Signaling (network emulation), LTE MIMO2x2

KS550 = Signaling (network emulation), LTE TDD (TD-LTE) Release 8

KS800 = Signaling (network emulation)basic CDMA2000 1xRTT

KS810 = Signaling (network emulation)advanced CDMA2000 1xRTT

KS880 = Signaling (network emulation)basic CDMA2000 1xEV-DO Revision 0/A

KS881 = Signaling (network emulation)basic CDMA2000 1xEV-DO Revision B

KS890 = Signaling (network emulation)advanced CDMA2000 1xEV-DO Revision 0/A

KT053 = GSM/WCDMA, CMWrun sequencer software tool

KT055 = LTE, CMWrun sequencer software tool

KT058 = CDMA2k 1xRTT/EV-DO sequence

KV110x2 = Waveforms for ARB generator, library 1

KV112x2 = Waveforms for ARB generator, library 2

PS502 = Wideband Radio Communication Tester, Basic Assembly

PS502x1 = CMW500 basic assembly (mainframe), including : one RF converter

S550B = Baseband interconnection

S550Bx1 = Baseband Interconnection, flexible link,for non-signaling, signaling

S590A = RF Frontend, basic functn

S590Ax1 = RF Frontend, basic functionality

S590D = RF Frontend Module advanced

S600B = Front Panel with Display/Keypad

S600Bx1 CMW500 frontpanel with display/keypad CMW module H600B

Please Note:

*** KS500 requires B110A

*** KS501 requires KS500

*** Option B590A cannot be installed with S590D

As 4G and LTE applications expand, additional options may be released. Ask your Test Equipment Connection salesperson for details. - See more at: http://www.testequipmentconnection.com/69770/Rohde_Schwarz_CMW500_loaded_with_options.php#sthash.PgvqnlJY.dpuf

Company Information:

Test Equipment Connection

The Worlds Largest Distributor of New, Refurbished, and Second Hand Electronic Test and Measurement (T&M) Equipment.

Lake Mary, Florida, USA

Equipment Dealer / Broker, Inspection, Manufacturer of Assembly Equipment

  • Phone 407-804-1299
  • Fax 407-804-1277

Test Equipment Connection website

Company Postings:

(3842) used SMT equipment marketplace items

(69) products in the catalog

(26) news releases

SMT Equipment & PCB Assembly Machines RFQ

This Rohde & Schwarz CMW500 has been added in 20 Dec 2013

This Rohde & Schwarz CMW500 has been viewed 462 times.

Online IPC Training & Certification

pcb components vacuum pick up