REAL Z 3000A 2D paste thickener

REAL Z 3000A 2D paste thickener
Product Functions
1, a good operating interface, easy to operate
2, to measure the software, eliminate the error caused by PCB deformation, can compensate the influence of the thickness of green oil and copper skin on the quantitative results
3, granite platform, wear resistance to deformation, not easy to generate static electricity
4, precision grid ruler as a measurement Benchmark, real-time calibration of the measurement results
5, easy to measure large size PCB
6, equipment design life more than 10 years
7, automatic standby protection laser generator, life delay several times
Product characteristics
1, self-enclosed precision grid ruler as a measurement Benchmark, real-time calibration of the measurement results, full closed-loop feedback, high accuracy. The measurement does not depend on the wearable wire rod motor and other transmission systems, and the accuracy is maintained well and the failure rate is low.
2, using the relative measurement method to eliminate the PCB deformation error, can compensate for the error caused by the thickness of green oil and copper foil.
3, the range is large, can directly measure the double panel, but also can measure the other than the solder paste such as V-Cut groove depth, components, BGA tin ball height and so on.
4, granite measurement platform, wear-resistant, not easy to deform, do not produce static electricity, can measure PCB area.
5, integrated solid base, rigid. Adjustable level of shock absorber foot.
6, a wide range of stepless variable optical lenses, high magnification, suitable for large welding discs to 0201, 01005, 0.2 mm thin spacing IC, BGA, CSP, etc., flexibility.
When the measured laser beam is directed to the measured surface, the optical lens automatically focuses on the measured surface. The focal length automatically remains unchanged after doubling.
8, laser generator with automatic standby protection, life delay several times. Laser brightness adjustment is convenient.
9, color camera, easy to recognize various features on the PCB board. You can take pictures and video. Hot plugging USB interface.
10, long-life LED lighting, color can switch suitable for various colors of PCB board measurement. Lighting brightness adjustment is convenient.
11, simultaneous monitoring and analysis of several production lines. It has the function of group management and one-key switching. Each production line is counted separately. Each product can have an independent judgment standard and option setting, and automatically determines whether or not it is qualified.
12, real-time refresh statistical parameters and charts, including average, standard deviation, Cpk, bad rate, distribution map, trend map, X bar-R control chart and other automatic calculation functions, flexible set statistical time period, can automatically generate and print complete reports.
13, optional measurement of length, width, angle, ratio, side length, area, coverage, volume, weight and automatic judgment function.
Raw data can be exported in Excel or text format.
15, automatic disk storage function, sudden power failure does not lose data. Use general purpose computer, installation no need to change the hardware, easy to replace.
16, simple operation and software interface, fast measurement.
III. Product parameters
1, measurement principle: relative method, grid ruler benchmark
2, resolution: 0.001 mm
3, absolute accuracy: ≤ 0.003 <UNK>
4, repeated accuracy: ≤ 0.01 <UNK>
5, green oil and copper foil error compensation: support
6, PCB deformation error elimination: support
7, range: 30 mm
8, optical magnification: 50-360X continuous ungraded times
9, field of view: 10 X 7.5-1 .2 x 0.8 mm adjusted as required
10, maximum capacity: PCB 400 x 600 mm
11, minimum measurable elements: 0201, 01005, 0.2 mm fine spacing IC, BGA/CSP
Lighting colors: white, green, blue and all off toggle
13, lighting light source life: ≥ 1 million hours
14, laser wavelength and power: 650nm, micropower & lt; 5 mW
Laser life: 5-10 times longer than that of a laser that has no standby function
17, video output interface: USB
18, video resolution: 640 x 480
19, total video pixels: 300,000
20, video type: color image
21, multi-line sharing: support
22, SPC statistical function: bad judgment, average value, standard deviation, Cpk, bad rate, distribution map, trend map, X bar-R control map, etc..
23, power and power consumption: power supply through USB interface, 2.5 W small power consumption
24, hot plug: support
25, weight and shape: 60kg, W600 X D550 X H650 mm
Hardware: CPU: Intel P4 1.4 G Above 2G Recommended) Memory: 256M Above 512M Recommended) Port: 1 or more COM, 2 or more USB 2.0 interface graphics cards: mainstream brands, and Direct9, 32M or more video storage
27, operating system: Microsoft Windows XP