NS-800II REFLOW SOLDERING

Technical Parameters
Model VS-800/VS-800-N VS-1000/VS-1000-N NS-800/NS-800-N NS-1000/NS-1000-N
Machine parameters
Dimensions (L*W*H) 5606×1350×1440mm 6376×1350×1440mm 5606×1350×1440mm 6376×1350×1440mm
Color computer gray computer gray computer gray computer gray
Weight about 2250kg about 2450kg about 2250kg about: 2450kg
Number of heating zones up 8 / down 8 up 10 / down 10 up 8 / down 8 up 10 / down 10
Heating zone length 3121mm 3891mm 3121mm 3891mm
Number of cooling zones 2 (built-in) 2 (built-in) 2 (built-in) 2 (built-in)
Exhaust volume requirements 10 M3 / min x 2 sets 10 M3 / min x 2 sets 10 M3 / min x 2 sets 10 M3 / min x 2 sets
Control some parameters
Power requirements 3 phase, 380V 50/60HZ (optional 3 phase 220V 50/60Hz optional)
Power requirements 64KW / 67KW 80KW / 83KW 64KW / 67KW 80KW / 83KW
Starting power 23KW / 24KW 29KW / 30KW 23KW / 24KW 29KW / 30KW
Normal operating power 12KW / 14KW 14KW / 16KW 12KW / 14KW 14KW / 16KW
The heating time is about 25 min.
Temperature control range: room temperature~300℃
Temperature control method PID closed loop control + SSR drive
Temperature control accuracy ± 1℃
PCB board temperature distribution deviation ± 1.5℃
Parameter storage can store a variety of production setting parameters and conditions (40GB)
Abnormal alarm temperature is abnormal (super high temperature or super low temperature after constant temperature)
Falling board alarm Three-color signal light: yellow-heating; green-constant temperature; red-abnormal
Transport parameters
PCB width Max. Width Of PCB 400mm
Rail width adjustment range / width adjustment form 50~400mm / electric
Part height 25mm on PCB board, 25mm below
Transport direction left to right (optional: right to left)
Transport rail fixing method: front fixed (optional: rear fixed)
PCB transportation mode Chain drive (standard) / mesh belt drive (nitrogen furnace is optional
Conveyor belt height 900±20mm
Conveyor belt degree 0~2000mm/min
Reflow thermal engineering management analysis
Thermal engineering real-time monitoring system (U.S. KIC 24/7 system) Standard configuration
other
Nitrogen system (Nitrogen reserved structure) Oxygen analyzer; Nitrogen flow meter
Flux management Furnace air circulation filter, optimize the furnace environment, easy to maintain
Water chiller 3HP external type, sufficient cooling capacity required by lead-free process
The central support prevents the PCB board from bending and deforming due to too wide and heavy components

View NS-800II REFLOW SOLDERING