EKT-EKT-VT-680D AOI/4B240330A

Programming mode: automatic writing, manual writing, CAD data import, automatic corresponding component library
Detection mode: Optimized detection technology covering the entire circuit board. Jigsaw and multi-mark, including Bad Mark function
Inspection type: solder paste printing with or without, offset, less tin, more tin, open circuit, pollution and other parts defects; missing parts, offset, skew, tombstones, side standing, overturned parts, wrong parts, damaged, reverse, etc. Mounting defects; solder joint defects such as too much tin, little tin, virtual solder, and even tin; copper foil pollution, black pads, delamination, copper foil lack, oxidation and other PCB defects.
Image recognition: automatically set parameters according to different detection requirements (such as offset, polarity, short circuit, etc.)
SPC statistical function: the whole process of recording test data and performing statistics and analysis. Production status and quality analysis can be viewed in any area
PCB size: 50*50mm(Min)-400*360mm(Max)
PCB curvature: <5mm or 3% of the diagonal length of the PCB
PCB part height: above <30mm, below <50mm
PCB transmission system: Bottom-up fixed, automatic compensation of PCB deformation, automatic entry and exit of the board, automatic adjustment of the width
Positioning accuracy: <16um
Moving speed: 800mm/sec
Image processing speed: 0402chip <12ms
Camera and lighting system: full-color high-speed digital CCD camera, lens resolution 10, 15, 18, 20um optional, three-channel RGB light source
Drive system: AC servo motor system, precision ground ball screw
Minimum part test: 0402chip & 0.4 pitch IC
Software system: Windows XP
Calculation method: color calculation, color extraction, grayscale calculation, image comparison, etc.
Output display: 22-inch widescreen (16:10, 1680*1050 resolution) display
Output signal: OK/NG signal, equipment operating status signal, alarm signal
Network communication: support
Data transfer tool: support CAD, Excel, Txt and other common formats
Machine model: EKT-VT-680D
Equipment weight: 560KG
Equipment dimensions: 1000*950*1580mm
Air pressure requirement: pipeline compressed air is required, ≥0.49MPa

View EKT-EKT-VT-680D AOI/4B240330A