MPM MOMENTUM+ / M202388
Model: |
MPM MOMENTUM+ / M202388 |
Category: |
|
Model Year: |
2013 |
Condition: |
|
Location: |
China |
Offered by: |
|
|
|
| Contact Qinyi Electronics Co.,Ltd |
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput demands grow. There are five different versions of the Momentum available, based on needed cycle time speed, or capacity. Numerous patents protect the Momentum, which incorporates tried and true systems and features from other successful MPM printers that were designed prior to Momentum (and are still in use today). Momentum’s alignment repeatability is +/-12.5 microns @ 6 sigma, Cpk > 2. Its 6 sigma capability is designed in and independently verified. Wet print accuracy is 20 microns @ 6 sigma, Cpk > 2. Tighter performance tolerances mean higher repeatability with fewer defects.
BOARD HANDLING
Maximum Board Size (X x Y):
609.6 mm x 508 mm (24” x 20”)
Staging Mode - Momentum Elite:
457 mm x 508 mm (18” x 20”)
Minimum Board Size (X x Y):
50.8 mm x 50.8 mm (2” x 2”)
Board Thickness:
0.2mm (0.008") to 5.0mm
(0.20”), up to 6.0 mm
(0.24”) without top clamp foils
Maximum Board Weight:
4.5 kg (9.92 lbs)
Board Edge Clearance:
3.0 mm (0.118")
Underside Clearance:
12.7 mm (0.5") standard
Configurable for 25.4 mm (1.0”)
Board Hold-Down Fixed top clamps, centernest vacuum
Optional EdgeLoc
Board Support Methods:
Magnetic pins,Optional Gel-Flex, vacuum pins,
support blocks, patented auto-tooling or Grid-Lok
PRINT PARAMETERS
Maximum Print Area (X x Y):
609.6 mm x 508 mm (24" x 20")
Print Gap (Snap-off):
0 mm to 6.35 mm (0" to 0.25")
Print Speed Up to 305 mm/sec (12.0"/sec)
Print Force 0 to 20 kg (0 lb to 44 lbs)
Stencil Frame Size:
737 mm x 737 mm (29" x 29")
Adapters available for smaller sizes
VISION
Fiducial Types:
Standard shape fiducials(see SMEMA standards),
pad/aperture
Camera System:
Single digital camera - MPM patented look up/down vision
PERFORMANCE
Total System Alignment: ±12.5 microns
Accuracy and Repeatability:
±0.0005") at 6 sigma, Cpk of greater than or equal to 2.0*
Qualification is performed using production environment
process variables; print speed, table lift and camera
movement are included in the capability figure.
Wet Print Deposit ±20 microns
Accuracy and Repeatability (±0.0008") at 6 sigma,
Cpk of greater than or equal to 2.0*
Based upon actual wet printing with positional accuracy
and repeatability verified by a 3rd party measurement
system.
Cycle Time
Momentum 11 seconds standard
Momentum+ 9 seconds standard
Momentum HiE 7.5 seconds standard
Momentum Elite 6 seconds standard
FACILITIES
Power Requirements
200 to 240 VAC (±10%)
single phase @
50/60Hz,
15 A
Air Supply Requirements 100 psi at 4 cfm
(standard run mode) to 18cfm
(vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5L/s),
12.7 mm (0.5”) diameterline
Machine Weight
Momentum, Momentum+ Momentum HiE:
862 kg (1900 lbs)
Momentum Elite:
899 kg (1982 lbs)
Crated Weight
Momentum, Momentum+ & Momentum HiE:
1155.5 kg (2547 lbs)
Momentum Elite:
1192.5 kg (2629 lbs)
Company Information:
.gif)
