Saki BF18D

Model:	Saki BF18D
Category:	AOI / Automated Optical Inspection
Condition:	used
Location:	United Kingdom
Offered by:	smtXtra
	Contact Supplier

SAKI Desktop AOI BF18D-P40 Inspection Machine

Substrate flatness: ±2mm
Board size:50 * 60 - 250 * 330mm
PCB thickness: 0.6mm - 2.5mm
weight::30KG

■ Industry-Leading High Throughput Leading High Throughput

The Alternate Color Digital Scanning System(*1) provides a
single scan to capture the entire PCB image and therefore gives a
very high throughput. The Scanning speed is only 14 s for the M
size PCB (250mmx330mm).
(*1) The liner scanning and alternate lightning system capture the
multi images of the whole PCB with single scan.
■ High-resolution Imaging System resolution Imaging System
The high resolution of 18 micron m with color line CCD provide
more accurate and stable inspections for the solder filets on small
components such as 0201 (0603) chip and 0.4mm pitch lead.

High Accuracy High Accuracy
The Telecentric Lens(*2) and the Automatic Digital Shading System(*3) increase the repeatability and the compatibility, and hence provide high
accuracy of the inspection result. In addition, Green / Blue LED provides more accurate capability of character recognition and polarity detection.
(*2) The unique lens developed is able to compensate the distortion (the field angle) of the image for a more accurate detection.
(*3)The brightness of each pixel for a clearer image is calibrated automatically.
■ Wide Range of Application Wide Range of Application
The clearance of the PCB from upper 40mm to lower 60mm is designed which is able to handle the PCB with tall components. The Desktop
machine is applicable to any process, after solder printing, after mounting process and after flow / reflow process.
The loading table is detachable and therefore the customer can set their original designed PCB holder.
■ Safety Safety
The area senor at the loading entrance is standard to ensure the safety of the operator.
■ Pre scanning
While checking and repairing the defect PCB, the machine can start the scanning of the next PCB which increase the production speed.
■ Easy-to-use Interface and Recipe Setup use Interface and Recipe Setup
The user-friendly Graphic User Interface (G.U.I.) simplifies the operational steps and also reduces the recipe setup time. The images captured
with the Alternate Color Digital Scanning System are saved in the memory. The defect inspection is then made from the saved images which
results very high throughput.
■ Auto update function Auto update function
The inspection data made in offline teacher (BF-Editor) is automatically updated into the desktop machine without stopping inspection. It keeps
high efficiency of the desktop machine.
■ Real Time SPC Information Real Time SPC Information
The real time SPC information is shown to support the management of production quality, and therefore the increase of production yield.BF
series together with the analysis packages such as BF-Repair, BF-Editor, BF-Monitor and BF-View classify defects in real time during inspection,
providing immediate feedback on defect types.
■ Recognition Barcode and traceability function Recognition Barcode and traceability function
Capability of recognition of Barcode, 1D/2D (QR, data matrix) together with the analysis packages assure the traceability of the production.
■ Automatic inspection data application
The both sides of the PCB are recognized automatically after scanning them separately and the tool applies the pre setting recipe to each side.
The function keys are also assigned to maximum 4 recipes and apply each one with a side.
■ Automatic inspection start Automatic inspection start
The entrance area sensor detects the timing when the operator loads the PCB and it automatically start the inspection without pushing the start
button each time. The area sensor ensures the safety and efficiency of inspection procedure.
(Note: This function is selectable.)