SMT & PCB Assembly Equipment

ETA E10 Lead-free Reflow Oven

ETA E10 Lead-free Reflow Oven

ETA E10 Lead-free Reflow Oven

Model:

ETA E10 Lead-free Reflow Oven

Category:

Soldering - Reflow

Model Year:

2013

Condition:

new

Location:

China

Offered by:

Shenzhen ETA Technology Co., Ltd

View ETA E10 Lead-free Reflow Oven

Lead-free reflow oven

Heating System

  • Eight groups of top and bottom forced hot air convection heating zones.
  • Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
  • Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
  • Power consumption savings of 1/3 as compared to other systems.
  • Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
  • Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
  • Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.

Cooling System

  • Two (2) groups of forced air convection cooling zones.
  • Distortion-free Conveyor System with Automated Chain Lubrication
  • Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support. )
  • Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
  • Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.

Fresh Air Recharge System

  • Fresh air is supplied to each zone uniformly to provide a rapid process transfer.

Flux Management System

  • Air amplifier forces supercharged flux collection and recirculation.
  • Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.

Control System

  • PC control system with windows based control software.

Additional Features

  • Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
  • Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
  • Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
  • Swing arm control PC station
  • Four (4) emergency stop switches
  • Two (2) exhaust ports
  • SMEMA interface
  • System documentation

General:

  • Outside dimension  6100x1353x1490mm
  • Standard color  Computer grey
  • Weight  Approx. 2450kg
  • Number of heating zones  Up10/bottm10
  • Length of heating zones  3891mm
  • Number of cooling zones  2(built-in)
  • Exhaust volume  10M3/minx2 Exhausts
  • Standard feature of control system
  • Electric supply required  3phase, 380V 50/60Hz
  • Electric power required  80KW
  • Power for warm up  36KW
  • Power consumption  11KW
  • Heating pattern  Up& Bottom Hot air
  • Warming time  Approx. 30minute
  • Temp. setting range  Room temp__300degree
  • Control system  PLC+ Computer
  • Temperature control method  PID close loop control +SSR driving
  • Temperature control precision  ± 1.0degree
  • Temperature deviation on PCB  ± 1.5degree
  • Data storage  Process data and status storage (80GB)
  • Abnormal alarm  Abnormal temperature(extra-high/extra-low temp)
  • Board dropped alarm  Tower light: yellow warming: Green-normal: Red-abnormal
  • Standard features of conveyor system
  • Max. width of PCB  Max: 450mm(Standard)
  • Rail Number  1 Lane(standard)
  • Components clearance  Top/bottom clearance of PCB is 25mm
  • Conveyor height  Light → right(option: R→ L)
  • PCB transmission agent  Air-reflow=chain +mesh (Standard)
  • Conveyor height  900/± 20mm
  • Conveyor speed range  300~2000mm/min

View ETA E10 Lead-free Reflow Oven

Company Information:

Shenzhen ETA Technology Co., Ltd

ETA is the world's leading provider of SMT factory planning solutions, providing SMT Machine, More than 25 years of experience.

Shenzhen, Guangdong, China

Contract Manufacturer, Equipment Dealer / Broker

  • Phone +86 13670124230

Shenzhen ETA Technology Co., Ltd website

Company Postings:

(34) used SMT equipment marketplace items

(368) products in the catalog

(1) news release

SMT Equipment & PCB Assembly Machines RFQ

This ETA E10 Lead-free Reflow Oven has been added in 24 Apr 2014

This ETA E10 Lead-free Reflow Oven has been viewed 324 times.

SMT Machines china

2021  IPC Training Schedule