Quad IQ 8 pin Feeders 8,12,16,24,32 and 44mm
Model: |
Quad IQ 8 pin Feeders 8,12,16,24,32 and 44mm |
Category: |
|
Model Year: |
2016 |
Condition: |
|
Location: |
Ohio, USA |
Offered by: |
|
| Contact Supplier |
8mm, 12mm, 16mm, 24mm, 32mm, 44mm IQ ( Intelligent ) Surface Mount Tape Feeders and tape feeder reel arms for QUAD Q series and C series pick and place machines. These are the newer 8 pin, deep pocket, feeders and they will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1 / Plus, QSP-2, QSX-1, C4, C2, C3, QSA, APS-1 and 4000C and 1000. All feeders electronically advance when pick nozzle or your finger interrupts the pickup sensor. All feeders tape advance and rewind when using the black and red switches. All feeders have newer capstan idler rubber and will advance smoothly and without excess noise. Idler rubber does not have bumps or dead spots that are common from storage or age. 8 and 12mm feeders currently have new idler rubber. All feeders are tested to confirm that they retain advance position memory. These are also the more desirable deep pocket type for taller parts. All tape take up reels are in good condition and advance. Contact pins are all in good condition. These are newer feeders of the same age and some are consistent lots. They all have version 3.30 or 3.40 firmware. Video of the feeders under test on the bench is available by request. Limited supply of reel arms. Great prices, Quanity Discounts
440-826-1676
Company Information:
