SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing News

Stay informed with latest electronics manufacturing news added by SMTnet members.


  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News

Add News »

17858 SMT / PCB Assembly Industry News Releases

Backdrill

Nov 05, 2019 | Backdrill is the process of creating vias by removing the stub in multilayer_ed printed wiring boards, to allow signals to flow from one layer of the board to another. It is a special craftsmanship of control depth drilling.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Knowledge about PCB Panelization

Nov 05, 2019 | Designing a PCB for automatic assembly and full production runs requires a few design changes from an initial prototype PCB run. Today most PCBs are assembled and tested with automated machines from the data from PCB drawing files. With up to 80% of a new product's cost determined by the first prototype build, avoiding late changes and designing with manufacturing in mind can have a significant impact on the product cost, reliability, and yield of a PCB design. Luckily, if some good choices are made early in the design process, designing a PCB for manufacturing is relatively straight forward with few pitfalls.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Press-fit Technology

Nov 05, 2019 | The basic principle of a press-fit connection is that a contact terminal is pressed into a printed circuit board (PCB). There are two types of press-fit pins – the solid pin with a solid press-in zone and the compliant pin with an elastic press-in zone. In this article, we’ll discuss the elastic press-in zone.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

PCB Sideplating

Nov 05, 2019 | 1. The definition of Sideplating Sideplating is actually the metalization of the board edge in PCB filed. Edge plating、Border plated、plated contour、side metal, these words can be used too to describe same function. 2. Sideplating Process Drilling - Milling plated Slots - Cleaning - Copper sink 3. Pictures to show the finished board’s sideplating

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Which PCB testing method is better for you?

Nov 05, 2019 | Very often, customers ask details about what kind of testing do we use? How do we charge it? Do I have to pay every time or only for the first time? Is this testing safer and better than other one? etc In this blog, let's discuss the various kind of testing and their advantages and disadvantages. Some of them are mandatory, some of them are optional; Some of them are fast, some are slow; some of them are more reliable, and some not. Hope you will have a better understanding about various kinds testing and make better decision on your next PCB order.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

How to improve EMC performance on 8 layer PCB design?

Nov 05, 2019 | 8 Layer PCB Stack-up Guidelines How to improve EMC performance on 8 layer PCB design? The following text is reproduced, with permission, from Part 4 of a 6-Part article on PCB Stackup by Henry W. Ott. The original article is available at http://www.hottconsultants.com/tips.html

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

What is the Advantages of Rigid-Flex PCB?

Nov 05, 2019 | WHAT IS RIGID-FLEX PCB? Rigid-flex PCB is a printed circuit consisting of both flexible circuit and rigid circuit. This combination is ideal for exploiting the benefits of both flexible and rigid circuits - the rigid circuits can carry all or the bulk of the components, with the flexible sections acting as interconnections between the rigid sections. Most rigid-flex circuit boards consist of multiple layers of flexible circuit substrates attached to rigid boards externally and/or internally. The flexible substrates are designed to be in a constant state of flex, and are usually formed in a flexed curve during manufacturing or installation. This is dependent upon the design of the application.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Guideline for wire bonding

Nov 05, 2019 | Home > > News-Blog > Guideline for wire bonding Guideline for wire bonding Tuesday,Jun 12,2018 There are two wire bonding processes that are used, Thermosonic (T/S) Gold Ball Wire Bonding and Ultrasonic (U/S) Aluminum Wedge Wire Bonding. Approximately 90% of all IC Assembly in Semiconductor Packages is manufactured using Gold Ball Bonding process, while Aluminum Wedge Bonding is used to produce about 10% of other Wire Bonding requirements on Printed Circuit Boards (PCB), Printed Circuit Flex (PCF) and other Packages.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Plated Half-Holes(Castellated Holes)

Nov 05, 2019 | Plated half holes(castellated holes)are holes that made off the edge of the boards plated with copper using a specialized process. It is predominantly used for board-on-board connections, mostly where two printed circuit boards with different technologies are combined. Through connecting the PCBs together directly, the whole system is considerably thinner than a comparable connection with multi-pin connectors.The plated edges are also useful in producing mini PCB modules.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Why do you need Stiffeners on Flex PCB?

Nov 05, 2019 | Flex PCBs are thin, light weight and easy bending, this gives much difficulty in the process of component assembly. Stiffeners are used to reinforce those areas where components will be assembled. There are many different material can be used as stiffeners, like polyimide, kapton, FR-4, Aluminium, etc, designer need to select the right material based on their thickness and characteristics.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

One article take you to know AL-based board

Nov 05, 2019 | Many customers and electronic designers were asking questions about the aluminum-based board, today our chief technical official Luca Zhang shared the knowledge and experience to you.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Why use Via in Pad Design?

Nov 05, 2019 | Via in pad is the design practice of placing a via in the copper landing pad of a component. Compared to standard PCB via routing, via in pad allows a design to use smaller component pitch sizes and further reduce the PCBs overall size. With component manufactures pushing smaller parts every year and the demand from consumers for smaller devices, the usage of via in pad practices by hardware engineers have become more commonplace. In this article, we will discuss the differences between via in pad and traditional vias, when should you use via in pad, and how to design for it.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

What's usage of Via tenting for PCB design?

Nov 05, 2019 | Tenting a via refers to covering via with soldermask to enclose or skin over the opening. A via is a hole drilled into the PCB that allows multiple layers on the PCB to be connected to each other. A non tented via is just a via that is not covered with the soldermask layer. Leaving these vias exposed or covered has pros and cons depending on the your design and manufacturing requirements.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

7 Common PCB Design Mistakes

Nov 05, 2019 | The printed circuit board, or PCB, is responsible for connecting all the components with each other in your electronic assembly. Making just one tiny error in the design could lead to complete failure. PCB layout design requires ardent precision and great technological skills.

Headpcb

Headpcb

Head Electronics Co., Limited (Headpcb), established in 2001, is one of leading quick turn PCB manufacturer who specializes in L2~L30 high-mix, low volume and quickturn prototype PCB for high-tech industries in 30 countries.

Shenzhen, China

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer, OEM

Hanwha Techwin Highlights HM520 Cutting-Edge Modular Mounter

Nov 05, 2019 | Hanwha Techwin Automation Americas is highlighting their model HM520 cutting-edge modular mounter, which features mixed production capabilities to maximize floor space by multiplying setup and changeover efficiency. 

Hanwha Techwin CO., LTD.

Hanwha Techwin CO., LTD.

SCTA develops and offers SMT assembly line solutions and machines for customers in North America. Samsung offers pick and place machines, screen printers, reflow ovens, accessory machines, and software products.

Irvine, California, USA

Manufacturer of Assembly Equipment, Pick and Place, Screen Printing

MPM Introduces Next Generation Momentum II Printer

Nov 05, 2019 | ITW EAE is introducing the MPM® Momentum II™ Printer as the next generation of the highly successful Momentum printer line. The Momentum II features a new set of enhanced technologies that bring further advancement in quality, yield, productivity, ease of use and flexibility.

ITW EAE

ITW EAE

ITW EAE is a manufacturer of equipment used in the electronic assembly and semiconductor industries. The group brings together world-class products from Camalot, Despatch, Electrovert, MPM, and Vitronics Soltec.

Lakeville, Minnesota, USA

Manufacturer of Assembly Equipment

KIC’s MB Allen to Present Industry 4.0 the Next Industrial Revolution at the SMTA Space Coast Expo

Nov 05, 2019 | KIC announced that it will exhibit at the SMTA Space Coast Expo & Tech Forum on Wednesday, Nov. 20, 2019 at the Melbourne Auditorium in Florida.

KIC Thermal

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Software Manufacturer

Nordson ASYMTEK introduces more technologies for reliable, efficient conformal coating and dispensing at Productronica 2019

Nov 05, 2019 | Nordson ASYMTEK introduces more products and solutions to create reliable and efficient conformal coating and dispensing processes in electronics manufacturing at Productronica 2019 in Hall A2, stand 345.

Nordson ASYMTEK

Nordson ASYMTEK

A leader in automated fluid dispensing, jetting and conformal coating. Products range from benchtop dispensers and stand-alone dispensing workstations to fully automated, in-line conveyorized systems.

Carlsbad, California, USA

Manufacturer of Assembly Equipment, Adhesives / Dispensing, Assembly, Component Packaging

Techcon to Demo New Jet Valve Dispensing System at productronica

Nov 04, 2019 | Techcon plans to exhibit in Hall A2, Booth 135 at productronica, scheduled to take place Nov. 12-15, 2019 at the Neue Messe München in Munich, Germany. The company will showcase its new TS9800 Series Jet Valve Dispensing System, TS8100 Series Progressive Cavity Pump and TSR2000 Smart Dispensing Robots.

Techcon Systems

Techcon Systems

Techcon offers a wide array of fluid dispensing products and provides dispensing components ranging from disposable accessories to complete microprocessor-controlled dispensing systems, and precision valves.

Cypress, California, USA

Manufacturer of Assembly Equipment, Adhesives / Dispensing

CORE-emt will represent BTU International in the Baltics

Nov 04, 2019 | BTU International, Inc. is pleased to announce that it has expanded its partnership with CORE-emt to include the Baltics (Estonia, Lithuania, Latvia). CORE-emt also represents BTU’s PYRAMAX™ reflow ovens in Denmark, Norway, Sweden and Finland.

BTU International

Steen V. Haugbølle, Managing Director at CORE-emt

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

Koh Young Process Optimizer earns yet another “Best-in-Class” Technology Innovation Award

Nov 04, 2019 | 05 November 2019 – Duluth, GA – Koh Young America proudly accepted the award for Best Process Control Software for its Koh Young Process Optimizer (KPO) solution at the Mexico EMS Technology Award ceremony held in conjunction with SMTA Guadalajara. The industry is recognizing the fact Koh Young is leading the effort to harness the power of connectivity and create smart factories. For instance, KPO uses AI-powered machine learning with interlinking software modules to execute proprietary algorithms that automatically recommends process changes.

Koh Young America, Inc.

Koh Young America, Inc.

Koh Young is the leading true 3D measurement-based inspection solutions provider supported by its global location network to maintain close communication with a growing user base and provide them access to process experts.

Duluth, Georgia, USA

Inspection, Repair / Rework, Test Services, Manufacturer of Test Equipment

Precision PCB Services, Inc. will exhibit at the LA/Orange County Expo & Tech Forum

Nov 04, 2019 | Precision PCB Services, Inc. will exhibit at the LA/Orange County Expo & Tech Forum on Tuesday, November 7, 2019 at the The Grand Event Center

Precision PCB Services, Inc

The Shuttle Star Ladies

Precision PCB Services, Inc

Products, Services, Training, and Consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep & Sole Agency North America for Shuttle Star BGA Rework Stations.

Oroville, California, USA

Consultant, Equipment Dealer / Broker, Manufacturer's Rep, Service Provider, Training Provider

Nordson Test & Inspection to launch four new systems at productronica

Nov 03, 2019 | Nordson Test and Inspection will exhibit in Hall A2, Stand 445 at productronica, scheduled to take place Nov. 12-15, 2019 at the Neue Messe München in Munich, Germany. Systems from Nordson DAGE, MATRIX, SONOSCAN AND YESTECH will be available for demonstrations.

Nordson ASYMTEK

Nordson ASYMTEK

A leader in automated fluid dispensing, jetting and conformal coating. Products range from benchtop dispensers and stand-alone dispensing workstations to fully automated, in-line conveyorized systems.

Carlsbad, California, USA

Manufacturer of Assembly Equipment, Adhesives / Dispensing, Assembly, Component Packaging

Weller to Supply Stations for the Soldering Challenge during the SMTA Space Coast Expo & Tech Forum

Nov 03, 2019 | Weller Tools announces that it is providing two soldering stations to support the SMTA Space Coast Chapter’s Third Annual Soldering Challenge at the upcoming exhibition and Tech Forum. The event will take place at 1 p.m. on November 20 at the Melbourne Auditorium in Melbourne, FL.

Weller/Apex Tool Group

Weller/Apex Tool Group

Apex , North Carolina, USA

Out of the Box Manufacturing Adds Hybrid Rework System from Ersa

Nov 03, 2019 | Kurtz Ersa Inc. today announced that Out of the Box Manufacturing has purchased an HR 600/2 Hybrid Rework System. The system was installed at the company’s facility in Washington.

kurtz ersa Corporation

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Soldering, Selective Soldering

Saki Corporation's Compact, Lightweight, Inline 3D-CT Automated X-ray Inspection System for PCBAs Delivers Increased Speed, Accuracy, and Safety

Nov 03, 2019 | Saki showcases automated inspection solutions for ensuring soldering quality at productronica 2019, Stand A2.259

SAKI America

SAKI America

Saki's 3D automated solder paste, optical, and x-ray inspection systems (SPI, AOI, AXI) have been recognized to provide the stable platform and advanced data capture mechanisms necessary for true M2M communication.

Fremont, California, USA

Inspection

Kodiak Assembly Celebrates Milestone 15 Year Anniversary

Oct 30, 2019 | Kodiak Assembly Solutions LP, a leading contract electronic manufacturer, is pleased to announce it celebrated the notable milestone of 15 years of manufacturing excellence on Thursday, October 24, 2019.

Kodiak Assembly Solutions

Kodiak Assembly Solutions

High Mix, Low/Medium Volume Electronics Contract Manufacturer

Austin, Texas, USA

Manufacturer of Assembled PCBs, Turnkey, Contract Manufacturer

Robotic Soldering, IoT Gateway and More from Metcal at productronica

Oct 30, 2019 | Metcal has announced plans to exhibit in Hall A2, Booth 135 at productronica, scheduled to take place Nov. 12-15, 2019 at the Neue Messe München in Munich, Germany. Representatives from Metcal will demonstrate the Robotic Soldering System, Connection Validation (CV) Soldering System with new hand-pieces and IoT Gateway with Solder Agent Software.

Metcal

Metcal

Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.

Cypress, California, USA

Manufacturer of Assembly Equipment, Adhesives / Dispensing, Repair / Rework, Soldering

WHMA 27th Annual Wire Harness Conference to Offer Workshop on the Evolution of IPC’s Cable and Wire Harness Documents

Oct 30, 2019 | Robert Cooke, NASA aerospace engineer and electronics industry subject matter expert, will deliver a technical education workshop, “The Evolution of IPC’s Cable & Wire Harness Documents: IPC-D-620, IPC/WHMA-A-620 and IPC-HDBK-620 at the WHMA 27th Annual Wire Harness Conference, February 18, 2020, in Las Vegas, Nevada.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Training Provider, Events Organizer

Precision PCB Services, Inc. will exhibit at the San Diego Expo & Tech Forum

Oct 30, 2019 | Precision PCB Services, Inc. will exhibit at the San Diego Expo & Tech Forum on Tuesday, November 5, 2019

Precision PCB Services, Inc

Precision PCB Services, Inc

Products, Services, Training, and Consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep & Sole Agency North America for Shuttle Star BGA Rework Stations.

Oroville, California, USA

Consultant, Equipment Dealer / Broker, Manufacturer's Rep, Service Provider, Training Provider

Indium Corporation, Libra Industries and STI Electronics Pledge Support for Stromberg Scholarship

Oct 29, 2019 | SMTA is delighted to announce the JoAnn Stromberg Leadership Scholarship recently received a five-year commitment of support from Indium Corporation, Libra Industries, and STI Electronics. Rod Howell, CEO of Libra Industries, moved the scholarship even further, pledging an additional five-year commitment. Donations made over the next five years will enable funding for 10 recipients.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association / Non-Profit, Training Provider, Events Organizer

NEO Tech Continues to Expand with Pro1

Oct 29, 2019 | NEO Tech continues to expand their already strong partnership with Pro1, an OEM that innovates advanced electronic thermostats to automate heating and cooling systems for professionals and homeowners.

NEO Technology Solutions (NEO Tech)

NEO Technology Solutions (NEO Tech)

NEO Tech combines the strengths of three leading contract manufacturers: NATEL, EPIC, and OnCore.

Chatsworth, California, USA

Manufacturer of Assembled PCBs, Design, Contract Manufacturer

Thermaltronics to Launch Two New Solder Robots at productronica 2019

Oct 29, 2019 | Thermaltronics USA, Inc. today announced plans to exhibit in Hall 4, Stand A305 at productronica, scheduled to take place Nov. 12-15, 2019 at the Neue Messe München in Munich, Germany. In addition to the award-winning TMT-R9800S Advanced Solder Robot System, Thermaltronics will launch two new additions to its product range.

Thermaltronics USA, Inc.

Thermaltronics USA, Inc.

Manufacturer of a wide range of Soldering Products & Accessories used in the electronics manufacturing industry.

Great Neck, New York, USA

Repair / Rework, Soldering

Speedprint to Exhibit Flagship SP710 and Long Board SP1550 printers at Productronica.

Oct 29, 2019 | Speedprint Technology will demonstrate two advanced printer platforms at this year’s Productronica exhibition on stand A2.461. The company’s flagship SP710AVi machine will feature on-board dispensing with the innovative dual syringe ADu+ and the award-winning S-Track traceability solution. The very long board SP1550 machine will be co-located with the ultra-flexible atom3 placement machine from sister company Europlacer, demonstrating a highly effective configuration for very long board (VLB) processing.

Speedprint Technology

Speedprint Technology

Speedprint Technology is an award-winning company delivering comprehensive printing solutions with a focus on value, flexibility and low cost-of-ownership for the SMT and Semiconductor industries.

Dorset, United Kingdom

Manufacturer of Assembly Equipment, Screen Printing

ZESTRON will be Exhibiting at SMTA San Diego and LA/OC Expo

Oct 29, 2019 | ZESTRON is pleased to announce that it will be featuring several cleaning solutions at SMTA San Diego and LA/OC expos, including products to clean power electronics and advanced packaging.

ZESTRON Americas

ZESTRON Americas

The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.

Manassas, Virginia, USA

Cleaning, Test Services, Training Provider

Nihon Superior extends soldering iron tip life by 3X with new TipSave N flux-cored solder wire

Oct 29, 2019 | Nihon Superior Co. Ltd. is pleased to announce the introduction of its new TipSave N flux-cored solder wire. The newly developed TipSave N flux-cored solder wire extends soldering iron tip life by 3X.

Nihon Superior Co., Ltd.

Nihon Superior Co., Ltd.

Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.

Osaka, Japan

Manufacturer of Assembly Material, Soldering

Data I/O Announces New PSV2800 Automated Programming System

Oct 29, 2019 | Data I/O Corporation today announced the release of the PSV2800 automated programming system. The PSV2800 is the latest addition to Data I/O’s award-winning PSV family and delivers up to 3,000 units per hour in production, making it ideal for high volume programming applications currently served by inflexible end of line solutions.

Data I/O Corporation

Data I/O Corporation

Data I/O is the world's leading provider of manual and automated programming solutions for semiconductor (IC) devices. Data I/O's solutions, software and programming engine ensures devices are programmed correctly every time.

Redmond, Washington, USA

Manufacturer of Assembly Equipment

How does dry cabinet work?

Oct 29, 2019 | Fast dehumidifying series dry cabinet announced!

Symor Instrument Equipment Co.,Ltd

Symor Instrument Equipment Co.,Ltd

Climatest Symor® is the leading environmental simulation testing equipment manufacturer in China established in 2001, located at Dayang Industrial Park,Hefei,China.

Hefei, China

Manufacturer of Test Equipment

ViTrox Technologies To Display Advanced Inspection Solutions at Productronica Germany

Oct 28, 2019 | PENANG MALAYSIA - October 2019 - Productronica Germany, a world’s leading trade fair for Electronics Development and Production will be held from 12th to 15th November 2019 at Messe München, Germany. ViTrox Technologies is joining the tradeshow, featuring its advanced vision inspection solutions at Hall 2, Booth 427.

ViTrox Technologies

ViTrox Technologies

A cutting-edge solutions provider of innovative, advanced and cost effective automated vision inspection system & equipment for the semiconductor and electronic packaging industries

Penang, Malaysia

Inspection

ViTrox Technologies To Display Advanced Inspection Solutions at Productronica Germany

Oct 28, 2019 | PENANG MALAYSIA - October 2019 - Productronica Germany, a world’s leading trade fair for Electronics Development and Production will be held from 12th to 15th November 2019 at Messe München, Germany. ViTrox Technologies is joining the tradeshow, featuring its advanced vision inspection solutions at Hall 2, Booth 427.

ViTrox Technologies

ViTrox Technologies

A cutting-edge solutions provider of innovative, advanced and cost effective automated vision inspection system & equipment for the semiconductor and electronic packaging industries

Penang, Malaysia

Inspection

CyberOptics Garners Mexico Technology Award for MRS-Enabled SQ3000™ Inspection and Metrology System

Oct 26, 2019 | CyberOptics® Corporation announced that it was awarded a 2019 Mexico Technology Award in the category of Inspection – SPI for its 3D SQ3000™ Multi-Function system for AOI, SPI and CMM. The award was presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

CyberOptics Corporation

CyberOptics Corporation

CYBEROPTICS is a global leader in high-precision 3D sensors that significantly improve yields and productivity in the 3D scanning and metrology, Surface Mount Technology & Semiconductor Markets

Minneapolis, Minnesota, USA

Inspection

Juki Receives Two Awards at SMTA Guadalajara

Oct 26, 2019 | Juki Automation Systems (JAS), Inc. announces that it was awarded two 2019 Mexico Technology Awards in the category of Placement – low/med volume for its JM-100 and Storage Systems for its Incoming Material Station. The awards were presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

Juki Automation Systems

Juki Automation Systems

Juki Automation Systems Inc. is one of the worlds leading SMT placement companies with over 45,000 machines installed worldwide and is the pioneer of the modular automated assembly line. see www.jukiamericas.com for more info.

Morrisville , North Carolina, USA

Manufacturer of Assembly Equipment, Pick and Place, Screen Printing, Selective Soldering

Datest Receives Mexico Technology Award for Imaging and Failure Analysis Services

Oct 26, 2019 | Datest announces that it was awarded a 2019 Mexico Technology Award in the category of Test Services for its Imaging and Failure Analysis Services for Colleges and Universities. The award was presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

Datest

Datest

Datest: 30 years of testing and test engineering utilizing in-circuit, flying probe, boundary scan, and functional platforms. Also AXI/2D/3D x-ray, CT-scan failure analysis, and bonepile rehab of functional/field failures.

Fremont, California, USA

Repair / Rework, Test Services, Service Provider

Laserssel Co., LTD Wins Two 2019 Mexico Technology Awards for Laser Selective Reflow

Oct 26, 2019 | Laserssel Co., LTD announces that it was awarded two 2019 Mexico Technology Awards in the categories of Soldering Equipment – Laser for its LSR (Laser Selective Reflow) and Bonding for its cLSR. The awards were presented to the company during a Wednesday, October 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

Laserssel Corporation

Laserssel Corporation

Laserssel Corporation is a leading provider of laser selective soldering technology supporting global semi-conductor, automotive, consumer, communications, military and industrial segments.

Chungcheongnam-do, South Korea

Manufacturer of Assembly Equipment

Nathan Trotter Receives a Mexico Technology Award for NT100Ge Solder Bar & Wire

Oct 26, 2019 | Nathan Trotter announces that it was awarded a 2019 Mexico Technology Award in the category of Solder Bar & Wire for its NT100Ge. The award was presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

Nathan Trotter & Co., Inc.

Nathan Trotter & Co., Inc.

Nathan Trotter's 200-year history of service and reliability has made us a trusted manufacturer and distributor of metals.

Coatesville, Pennsylvania, USA

Manufacturer of Assembly Material

YXLON International Wins Mexico Technology Award for FF70 CL 2D-3D X-ray

Oct 26, 2019 | YXLON International is pleased to announce that it has been awarded a prestigious Mexico Technology Award in the category of Inspection – X-ray for its YXLON FF70 CL Highest resolution advanced 2D and 3D X-ray system. The award was presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

YXLON International

YXLON International

YXLON is the leading supplier of Industrial X-ray Inspection systems and Industrial Computed Tomography (CT) solutions for the non-destructive testing of materials. Markets served include Aerospace, Automotive, Electronics, etc.

Hudson, Ohio, USA

Inspection, Test Services, Manufacturer of Test Equipment

ANDA Sweeps up FIVE Mexico Technology Awards

Oct 26, 2019 | Anda Technologiesis pleased to announce that it was awarded five 2019 Mexico Technology Awards. The company won in the following categories: Cleaning Equipment for the AP-3P Selective Atmospheric Plasma Treatment System, Curing for the VCO Series Vertical Curing Oven, Dispensing Equipment for the iJet7, and Robotic Handling Equipment and Editor’s Choice for the ADS Series Robotic Arm. The awards were presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

Anda Automation Pte Ltd

Anda Automation Pte Ltd

Manufacturer of automated machinery for selective conformal coating, fluid dispensing, plasma treatment, assembly machines, and complete factory process line solutions.

Singapore, Singapore

Manufacturer of Assembly Equipment

IDENTCO RECEIVES MEXICO TECHNOLOGY AWARD FOR AUTO APPLY SOLUTIONS

Oct 26, 2019 | IDENTCO announces that it was awarded a 2019 Mexico Technology Award in the category of Labeling for its Auto Apply Solutions. The award was presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

IDENTCO International Corporation

IDENTCO International Corporation

IDENTCO is an international company that provides durable labels and functional die cut parts to the Automotive, Electronics, Industrial, and Medical markets. Specializing in auto-apply labels & feeders for SMT pick and place machines.

Ingleside, Illinois, USA

Manufacturer of Assembly Material, Adhesives / Dispensing, Component Packaging, Pick and Place, Screen Printing

PDR Awarded for E6S Focused Infrared Rework at SMTA Guadalajara

Oct 26, 2019 | PDR announces that it was awarded the 2019 Mexico Technology Award in the category of Rework and Repair for its E6S Evolution Rework System. The award was presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

PDR-America

PDR-America

PDR manufactures IR BGA rework stations, BGA rework equipment, and SMD rework stations. SMD soldering solutions for BGA Rework, CSP Rework, QFN Rework, LED Rework, 0201 Rework and more. Also offers thermal test equipment. est.1987

Shingle Springs, California, USA

Repair / Rework, Soldering, Manufacturer of Test Equipment

Count On Tools Receives Mexico Technology Award for New Affordable PCB Support

Oct 25, 2019 | Count On Tools, Inc. (COT) announces that it was awarded a 2019 Mexico Technology Award in the category of Assembly Tools for its ezLOAD PCB Support System. The award was presented to the company during a Wednesday, Oct. 23, 2019 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

Count On Tools, Inc.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair / Rework, Contract Manufacturer

  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News
Facility Closure

Benchtop Fluid Dispenser