SMT, PCB Electronic Industry News

News Releases from kurtz ersa Corporation

Read kurtz ersa Corporation company news


227 news releases added by kurtz ersa Corporation

Company Information:

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Selective Soldering, Soldering

  • Phone +49 (0) 93 42 / 80 00
  • Fax +49 (0) 93 42 / 80 01 00

kurtz ersa Corporation website

Company Postings:

(15) products in the catalog

(1) technical library article

(227) news releases

Ersa to Introduce XL Rework and Selective at APEX

Jan 03, 2019 | Kurtz Ersa will exhibit at the 2019 IPC APEX EXPO, scheduled to take place Jan. 29-31, 2019 at the San Diego Convention Center in CA. The company will introduce the HR 600 XL and the VERSAFLOW 4XL with VERSAFLEX in Booth #2706.

Ersa HR 600 XL .

Kurtz Ersa Inc. picks up award for selective soldering at SMTA Guadalajara

Nov 16, 2018 | Kurtz Ersa Inc. announces that it was awarded a 2018 Mexico Technology Award in the category of Soldering -- Selective for its VERSAFLOW 455. The award was presented to the company during a Wednesday, Nov. 14, 2018 ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.

Krypton Solutions chooses Ersa for reflow, rework, selective solder and stencil printing

Nov 06, 2018 | Kurtz Ersa today announced that Krypton Solutions LLC has invested in several new systems from Ersa for its new facility. A long-time Ersa customer with equipment at its Plano, TX facility, Krypton selected Ersa to help furnish its new facility in San Jose, CA.

Ersa to exhibit at SMTA LA / Orange County Expo

Oct 25, 2018 | Kurtz Ersa will exhibit at the LA / Orange County Expo & Tech Forum, scheduled to take place Thursday, Nov. 1, 2018 at the Grand Event Center in Long Beach, CA. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

Ersa hires experienced field service engineer

Oct 22, 2018 | Kurtz Ersa today announced that it has hired Todd Shaw as its newest field service engineer in North America.

Todd Shaw as its newest field service engineer in North America.

Kurtz Ersa Inc. to highlight reflow and selective solder systems at SMTA Guadalajara

Oct 15, 2018 | Kurtz Ersa today announced plans to exhibit at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place Nov. 14 - 15, 2018 at the Expo Guadalajara. The company will highlight its industry-leading reflow and selective solder equipment.

Ersa Hotflow 3/20.

Ersa Strengthens Field Service Support on the East Coast

Oct 07, 2018 | Kurtz Ersa today announced that it has hired Christopher Weirick as its newest field service engineer in North America. Weirick will support Ersa’s soldering and printer equipment on the east coast.

Christopher Weirick as its newest field service engineer in North America.

Extreme Engineering Solutions Purchases Hybrid Rework System from Ersa

Oct 02, 2018 | Kurtz Ersa today announced that Extreme Engineering Solutions (X-ES) has purchased their second Ersa HR 600/2 for optimized, automatic component placement and precise temperature process control for all SMDs. Headquartered in the Madison, Wisconsin area, X-ES is an innovative leader, providing hardware, software and support for embedded applications.

Leading Dallas CM Installs High-Performance Rework from Ersa

Sep 26, 2018 | Kurtz Ersa today announced that Precision Technology Inc. has purchased an Ersa HR 550 Hybrid Rework system. The rework system was successfully installed at the company’s 55,000 ft.2 facility in Plano, TX in the Dallas technology corridor. Precision Technology offers cost-competitive, high-quality and quick-turn prototypes to mid and high-volume manufacturing services.

Ersa hires field service engineer for Rework, Inspection & Tools Division

Sep 26, 2018 | Kurtz Ersa today announced that it has hired Michael Gresser as its newest field service engineer in North America. Gresser will provide service for the Rework, Inspection & Tools Division.

Michael Gresser, newest field service engineer in North America.

Comtree to represent Kurtz Ersa Inc. at the EPTECH Mississauga and EPTECH Waterloo shows

Sep 23, 2018 | Kurtz Ersa today announced that Comtree will represent the company at the EPTECH Mississauga and EPTECH Waterloo shows. The Mississauga expo is scheduled to take place Tuesday, Oct. 2, 2018 at the Mississauga Convention Centre in Mississauga, ON, and EPTECH Waterloo will take place Thursday, Oct. 4, 2018 at the Bingemans Conference Centre in Kitchener, ON. Comtree will highlight the HR 550 hybrid rework system at both events.

HR 550 hybrid rework system .

Kurtz Ersa Inc. launches Smartflow training courses in response to market demand

Sep 23, 2018 | Kurtz Ersa is pleased to announce that the company is now offering two-day Smartflow selective solder training classes starting in October at its demo facility in Plymouth. The courses are being offered in response to the huge acceptance of the Smartflow selective soldering system in North America.

Smartflow selective soldering system.

Stencil Printer with Fully Integrated 3D SPI from Kurtz Ersa Inc. at SMTA

Sep 17, 2018 | Kurtz Ersa Inc.today announced plans to exhibit at SMTA International, scheduled to take place Oct. 16-17, 2018 at the Donald Stephens Convention Center in Rosemont, IL. The Ersa team will showcase the VERSAPRINT 2 Ultra stencil printer and HR 550 in Booth #616.

VERSAPRINT 2 Ultra stencil printer.

Ersa Hires Chris Curole as North American Printer Product Manager

Sep 16, 2018 | Kurtz Ersa Inc.today announced that it has hired Chris Curole as its NA Printer Product Manager. Curole comes to Ersa from MYCRONIC, Inc. where he worked as an Applications Engineer for the last 7 years. Prior to that he worked for VITRONICS SOLTEC for 16 years.

Chris Curole, NA Printer Product Manager.

Kurtz Ersa Inc. Announces Selective Soldering Application Training Course in Oct.

Sep 13, 2018 | Kurtz Ersa announced that it will hold an ERSA Versaflow 3 Selective Soldering Level II Application Training Course from Wednesday, Oct. 3, 2018 at 1 p.m. to Friday, Oct. 5, 2018 at 12 p.m. at its Plymouth office. The course will provide the knowledge and hands-on experience required for process application and programming on the Versaflow 3 selective soldering machine.

Kurtz Ersa Inc. to Hold Versaflow 3 Maintenance Training Course Next Month

Sep 10, 2018 | Kurtz Ersa Inc.today announced that it will hold an ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from Monday, Oct. 1, 2018 at 1 p.m. to Wednesday, Oct. 3, 2018 at 12 p.m. at its Plymouth office. The two-day class will provide the knowledge and hands-on experience required to maintain and troubleshoot issues on the Versaflow 3 machines.

Kurtz Ersa Inc. to show guided hybrid rework system at SMTA New England Expo

Sep 06, 2018 | Kurtz Ersa today announced plans to exhibit at the SMTA New England Expo & Tech Forum, scheduled to take place Wednesday, Sept. 12, 2018 at the DCU Center in Worcester, MA. The company will highlight the award-winning HR 550 Ersa Hybrid Rework System.

HR 550 Ersa Hybrid Rework System.

Kurtz Ersa Inc. Hires New District Sales Manager in the Midwest

Sep 04, 2018 | Kurtz Ersa is pleased to announce the appointment of Jon Golm to Junior District Sales Manager for the Midwest. As part of the company’s national sales team, Golm will help drive the sales revenues for the Midwestern United States.

Jon Golm Junior District Sales Manager for the Midwest.

Kurtz Ersa Inc. supports transition to IPC-HERMES-9852

Sep 03, 2018 | Kurtz Ersa is pleased to announce that IPC-HERMES-9852 replaces the obsolete SMEMA standard for the transfer of board-related information. IPC-HERMES-9852 was developed and introduced to the market by The Hermes Standard Initiative, an independent and open group of leading vendors of SMT assembly equipment. Kurtz Ersa was one of the original companies to work toward this initiative.

Kurtz Ersa Inc. and Comtree to Participate in the EPTECH Winnipeg Show

Aug 26, 2018 | Kurtz Ersa Inc., a leading supplier of electronics production equipment, today announced that Comtree will represent the company at the EPTECH Winnipeg, scheduled to take place Sept. 18, 2018 at the Victoria Inn and Convention Centre in Winnipeg, MB.

HR 550 hybrid rework system.

Kurtz Ersa Inc.’s Joseph Clure Presents “Eliminating Failures with Innovative Technologies”

Aug 01, 2018 | Kurtz Ersa is pleased to announce that Applications Engineer, Joseph Clure recently presented on behalf of the company at the InnovationsFORUM – Mexico in Guadalajara.

The presentation, “Eliminating Failures with Innovative Technologies.

Kurtz Ersa Inc. to discuss its reflow, selective solder and rework equipment at the CTEA Expo

Jul 22, 2018 | Kurtz Ersa today announced plans to exhibit at the CTEA (Austin) Expo & Tech Forum, scheduled to take place Tuesday, August 14, 2018 at the Norris Conference Center in Austin, TX. The Ersa team will discuss its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

Kurtz Ersa opens central warehouse On-schedule completion, official opening and Open Day

Jul 19, 2018 | After a building phase of just twelve months, the new central warehouse of Kurtz Ersa went into operation at the beginning of July. An occasion that was fittingly celebrated: with an official opening and an Open Day. In a festive setting on 2 July, Kurtz Ersa CEO Rainer Kurtz und Kurtz Ersa Logistics Director Matthias Hofmann officially opened the new central facility – with the symbolic warehousing of the first container.

Kurtz Ersa CEO Rainer Kurtz hands over the key to Logistics Director Matthias Hofmann.

Kurtz Ersa Inc. Expands Its North American High-Tech Demo Center

Jul 11, 2018 | Kurtz Ersa is pleased to announce that it has invested in its facility in Plymouth to expand the demo room to 3,000 ft2. Additionally, the company added on offices and an extra training conference room.

Kurtz Ersa Mexico to Participate in SMTA Queretaro Expo

Jun 17, 2018 | Kurtz Ersa Inc. today announced plans to exhibit at the SMTA Queretaro Table Top Exhibition & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Hotel Mision Juriquilla in Mexico.

HR 550 hybrid rework system.

KIC Introduces Auto Profiling and Intelligent Network Software Ecosystem RPI i4.0

Jun 17, 2018 | KIC is pleased to announce a new automatic profiling system with network software for real-time dashboard, data sharing and traceability storage. The new RPI i4.0 automatically acquires profile data from each product soldered in the reflow oven, in real-time.

Guided Hybrid Rework for Professionals from Kurtz Ersa Inc.

Jun 11, 2018 | Kurtz Ersa today announced plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Embassy Suites Cleveland Rockside in Cleveland. The company will highlight the award-winning HR 550 Ersa Hybrid Rework System.

HR 550 Ersa Hybrid Rework System.

Stencil Printer with Fully Integrated 3D SPI from Kurtz Ersa Inc. – Learn More at the SMTA Upper Midwest Expo

Jun 05, 2018 | Kurtz Ersa today announced that plans to exhibit at the Upper Midwest Expo & Tech Forum, scheduled to take place Thursday, June 14, 2018 at the DoubleTree by Hilton Minneapolis - Park Place in Minneapolis, MN. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

Kurtz Ersa Inc. and Comtree to Participate in the EPTECH Vancouver & Calgary Shows

Jun 03, 2018 | Kurtz Ersa Inc., a leading supplier of electronics production equipment, today announced that Comtree will represent the company at the EPTECH Vancouver and Calgary Shows. The Vancouver show is scheduled to take place Tuesday, June 5, 2018 at the Hard Rock Casino Vancouver, and the Calgary show is scheduled to take place Thursday, June 7, 2018 at the Glenmore Inn & Convention Centre.

Ersa Holds National Sales Meeting with Hands on Training

May 21, 2018 | Kurtz Ersa today announced that it held a successful sales meeting with hands on training for its North American sales representatives. The training was held May 16-17, 2018 at the company’s Plymouth facility and kicked off with a welcome speech from Albrecht Beck, President and CFO of Kurtz Ersa Inc.

Ersa’s VERSAPRINT 2 Ultra Offers Fully Integrated 100 Percent 3D SPI – Learn More at the SMTA Wisconsin Expo

Apr 27, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Wisconsin Expo & Tech Forum on Tuesday, May 8, 2018 at the Milwaukee Airport Crowne Plaza in WI. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

Ersa Hotflow 3/20, Smartflow 2020.

Don’t Miss Ersa at the SMTA Empire Expo!

Apr 22, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Empire Expo & Tech Forum, scheduled to take place Tuesday, April 24, 2018 at the Holiday Inn Syracuse/Liverpool in Liverpool, NY. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

Ersa Announces Versaflow 3 Application Training Course in April

Mar 16, 2018 | Kurtz Ersa North America today announced that it will hold an ERSA Versaflow 3 Selective Soldering Level II Application Training Course from Wednesday, April 18, 2018 at 1 p.m. to Friday, April 20, 2018 at 12 p.m. at its Plymouth office. The course will provide the knowledge and hands-on experience required for process application and programming on the Versaflow 3 selective soldering machine.

Ersa to Offer Versaflow 3 Maintenance Training Course in April

Mar 13, 2018 | Kurtz Ersa North America today announced that it will hold an ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from Monday, April 16, 2018 at 1 p.m. to Wednesday, April 18, 2018 at 12 p.m. at its Plymouth office. The two-day class will provide the knowledge and hands-on experience required to maintain and troubleshoot issues on the Versaflow 3 machines.

Learn More About Ersa’s Reflow, Selective Solder & Rework Systems at the SMTA Dallas & Houston Expos

Mar 05, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The SMTA Dallas Expo is scheduled to take place Tuesday, April 10, 2018 at the Plano Centre in Plano, TX. The Houston Expo & Tech Forum will be held Thursday, April 12, 2018 at the Bayou City Event Center in Houston, TX. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

Ersa Hotflow 3/20.

Award-Winning Reflow, Selective Solder & Rework from Ersa at SMTA Intermountain Expo

Feb 19, 2018 | Kurtz Ersa North America today announced plans to exhibit at the SMTA Intermountain (Boise) Expo & Tech Forum, scheduled to take place Tuesday, March 20, 2018 at Boise State University in Boise, ID. The Ersa team will highlight its advanced reflow, selective solder and rework equipment.

Ersa Hotflow 3/20.

Altek Electronics, Inc. Purchases Ersa’s Smartflow Selective Soldering System

Feb 15, 2018 | Kurtz Ersa North America has purchased and successfully installed the Smartflow 2020 selective soldering system. A veteran-owned small business privately held by three family members (Stephen, David and Sabrina), Altek manufactures printed circuit board assemblies and box builds for many industries including the medical, military, industrial and telecommunications industries.

Colin Fuoco, Machine Operator: Wave/SS at Altek.

Ersa Pushes for Smarter Systems – One Step Closer to Artificial Intelligence

Feb 12, 2018 | Kurtz Ersa North America is pleased to announce that it has developed several new features for its selective solder equipment, including VERSASCAN, VERSAEYE and Ersa CAD Assistant 4. The VERSASCAN module can look at boards being presented to the machine and confirm if all of the components are on the board and if the polarity is correct before they enter the machine. This can be paired with another feature called VERSAEYE that looks for any defects on the board. Finally, Ersa CAD Assistant 4 offers intuitive and automated offline programming with a graphical user interface and template library.

Ersa Partners with WEST TECH Automation in Rocky Mountain Region

Feb 01, 2018 | Kurtz Ersa North America announces the appointment of WEST TECH Automation as its manufacturers’ representative in UT, CO, ID, WY and MT. WEST TECH will be responsible for the sales of Ersa’s products.

Advanced Reflow, Selective Solder and Rework Systems from Ersa at APEX

Jan 24, 2018 | Kurtz Ersa North America today announced plans to exhibit in Booth #1337 at the 2018 IPC APEX EXPO, scheduled to take place Feb. 27 - March 1, 2018 at the San Diego Convention Center in Ca. The Ersa team will highlight a lineup of advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, VERSAFLEX-Ultra selective solder module and IR/PL 650 XL rework system.

Ersa Continues to Grow Support in Mexico with New Field Service Engineer

Jan 11, 2018 | Kurtz Ersa North America is pleased to announce the newest member of its Kurtz Ersa Mexico service team. Gerardo Mejia is the company’s new field service engineer on the machine side and will be based at the KMX office in Guadalajara supporting all of Mexico.

Gerardo Mejia is the company’s new field service engineer.

SANTEC Marketing to Represent Kurtz Ersa North America

Jan 09, 2018 | Kurtz Ersa North America,announces the appointment of SANTEC Marketing as its manufacturers’ representative in AZ, New Mexico and Sonora. SANTEC will be responsible for the sales of Ersa’s entire range of products.

Ersa Appoints TRC as Its Representative in Florida

Jan 08, 2018 | Kurtz Ersa North America announces that it has appointed Technical Resources Corporation (TRC) as its manufacturers’ representative in Florida. TRC will represent and sell Ersa’s complete line of equipment.

Frank Mascetti.

Advanced Reflow, Selective Solder and Rework from Ersa

Jan 04, 2018 | Kurtz Ersa North America will exhibit at the SMTA Rocky Mountain Expo & Tech Forum on Monday, Jan. 25, 2018 at the West Club at Mile High Stadium in Denver, CO. The Ersa team will highlight its advanced reflow, selective solder and rework equipment.

Ersa Hotflow 3/20.

Ersa Appoints TRC as its Representative in Florida

Jan 04, 2018 | Kurtz Ersa North America announces that it has appointed Technical Resources Corporation (TRC) as its manufacturers’ representative in Florida. TRC will represent and sell Ersa’s complete line of equipment.

Ersa Welcomes GMG Industrial to Representative Network

Jan 02, 2018 | Kurtz Ersa North America has appointed GMG Industrial Inc. as its manufacturers’ representative in TX, LA, AR and OK. GMG is a manufacturers’ representative for electronic assembly, inspection and consumables, and will represent Ersa’s complete line of equipment.

Versaflow 3 Application Training Course at Kurtz Ersa Guadalajara Facility

Dec 18, 2017 | Kurtz Ersa North America today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Application Training Course from Wednesday, January 17, 2018 at 1 p.m. through Friday, January 19, 2018 at 12 p.m. at the Kurtz Ersa Mexico office in Guadalajara. Students that attend this training class will gain the knowledge and hands-on experience for process application and programming on the Versaflow 3 selective soldering machine.

ERSA Versaflow 3 Selective Soldering.

Ersa to Hold Versaflow 3 Maintenance Training Course in Mexico

Dec 14, 2017 | Kurtz Ersa North America today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from Monday, January 15, 2018 at 1 p.m. to Wednesday, January 17, 2018 at 12 p.m. at the Kurtz Ersa Mexico office in Guadalajara. This course will provide the knowledge and hands-on experience required to maintain and troubleshoot issues on the Versaflow 3 machines.

Ersa Congratulates IPC Hand Soldering Competition Champions

Dec 04, 2017 | Kurtz Ersa North America congratulates the 16 competitors that participated in the Hand Soldering Competition Championship on November 17 during the recently held productronica exhibition in Munich.

Kurtz Ersa North America congratulates the 16 competitors that participated in the Hand Soldering Competition Championship on November 17.

Ersa Strengthens Service Team with Addition of Quin Van Den Berg

Nov 30, 2017 | Kurtz Ersa North America is pleased to announce that it hired Quin Van Den Berg as the newest member of its service team. Van Den Berg will report to Chad Suckow and will be responsible for helping the Tools, Rework and Inspection team support the growing service need on that side of the business.

Quin Van Den Berg.

Pages: 1 2 3 4 5

Jetting Pump for Integration

FPC* - Fluid Pressure Control - Dispensing Pump