SMT, PCB Electronics Industry News

Seika Machinery Will Exhibit the Latest SMT Solutions at SMTAI

Aug 27, 2015

The RD-500V Rework Station features a two mega pixel full HD camera with a 19

The RD-500V Rework Station features a two mega pixel full HD camera with a 19" LCD display for easy visual alignment. It samples the data in very small intervals of 0.1 sec, allowing extremely accurate temperature control.

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will exhibit in Booth #707 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. The Seika team will be available to demonstrate the following equipment: DEN-ON INSTRUMENTS CO., LTD. RD-500V Rework Station, UNITECH UC-250M-CV PCB Board Cleaner, MALCOM SPS Solder Paste Mixer and MALCOM Spiral Viscometer.

The RD-500V Rework Station features a two mega pixel full HD camera with a 19" LCD display for easy visual alignment. It samples the data in very small intervals of 0.1 sec, allowing extremely accurate temperature control. The RD-500V is equipped with powerful built-in 1000W heaters on both the top- and bottom-side, and an area heater that includes six quick heating 600W IR heaters. Precise profiling including detailed temperature curves can be executed with the ability to closely control up to 30 zones.

The UC-250M-CV Board Cleaner adds a dual cleaning feature using a combination of a brush roller with the silicone/adhesive cleaning rollers. The combination dual dust removal system assures better results than a single brush or adhesive roller system. The UC-250M-CV has the ability to clean the top surface of PCB even chip components attached on the bottom side. Additionally, the cleaner features an antistatic bar (ionizer) to neutralize static and prevent dust from collecting on the top surface of the PCB.

The MALCOM SPS Solder Paste Mixer is a non-contaminating mixer that utilizes pseudo planetary motion to stir the solder paste. The SPS-1 provides uniform paste consistency regardless of operator skill. The paste temperature rises due to friction, enabling control over the solder paste viscosity. Now, a solder paste can be pulled from the refrigerator and ready on the stencil, in 10 minutes.

The MALCOM PCU-200 Digital Viscometer features a patented spiral-pump sensor that provides quick, easy and repeatable measurements. It provides continuous measurement of newtonian and non-newtonian fluids with constant shear rate and shear time. Additionally, the system features automatic control of measurement according to JIS standards (PCU-203,205). Application includes solder pastes, thick film pastes, solder resists, liquid resists, inks, etc.

Also at the show, company representatives will highlight the MALCOM RCX-1 Reflow Monitoring System and Hioki Flying Probe among other equipment.

For more information about any of the advanced equipment from Seika Machinery, contact Michelle Ogihara at michelle@seikausa.com or visit www.seikausa.com.


Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Mar 18, 2024 -

Seika Machinery to Present Solutions to Optimize Production Processes at APEX 2024

Jan 08, 2024 -

Seika Machinery Celebrates Three Decades of Excellence in Supplying Electronics Machinery & Products

Dec 25, 2023 -

Seika Machinery Rolls Out Fully Automatic Sawa Ecobrid Stencil Cleaner and Sayaka CT23S Tabletop Router

Nov 13, 2023 -

Seika Machinery Introduces Innovative PCB Cleaner and Router for Enhanced Precision and Quality

Oct 30, 2023 -

Seika Machinery Celebrates Prestigious Win for SAYAKA PCB Router SAM-CT34XJ at 2023 Mexico Technology Awards

Oct 09, 2023 -

Seika Machinery to Deliver Two Insightful Presentations at SMTA International

Sep 25, 2023 -

Seika Machinery Showcasing Tabletop Router, Stencil Cleaner & More at the SMTA Guadalajara Expo

Sep 15, 2023 -

Seika Machinery Announces Special Sale on McDry DXU-580UF Feeder Storage Cabinet

Sep 11, 2023 -

Seika Machinery to Present Lineup of Advanced Manufacturing Solutions at SMTA International

Aug 29, 2023 -

Seika Machinery Announces SMTA Technical Webinar on "Effectiveness of Strain Gage Methodology for Durable Board Design"

281 more news from Seika Machinery, Inc. »

Mar 27, 2024 -

Red Glue SMT Solutions: A Cost-Effective Approach for Double-Sided PCBs

Mar 26, 2024 -

North American PCB Industry Sales Down 11.6 Percent in February

Mar 26, 2024 -

iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs

Mar 26, 2024 -

Don Dennison Appointed to Roll Out KIC's Latest Thermal Analysis System Software in the Northeast

Mar 26, 2024 -

Altus Group Achieves Record Sales Milestone with Koh Young Europe

Mar 26, 2024 -

STI Welcomes Edrick Young as the Newest Mechanical Assembly Technician

Mar 26, 2024 -

Anda Technologies Receives 2024 NPI Award for Setting a New Standard in Smart Manufacturing

Mar 26, 2024 -

ZESTRON's Olaf Schoenfeld, Ph.D. to Participate in EV Special Session at IPC APEX Expo

Mar 26, 2024 -

North American EMS Industry Up 4.1 Percent in February

Mar 26, 2024 -

SMTA Europe Announces 2024 Spring Conferences

See electronics manufacturing industry news »

Seika Machinery Will Exhibit the Latest SMT Solutions at SMTAI news release has been viewed 891 times

Sell Your Used SMT & Test Equipment

Jade Series Selective Soldering Machines