SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Saelig Introduces Versatile 120W Triple Output Programmable Power Supply for Automated Test Applications

Saelig Introduces Versatile 120W Triple Output Programmable Power Supply for Automated Test Applications

Nov 06, 2019

ABI Electronics PPS Programmable Power Supply from Saelig

ABI Electronics PPS Programmable Power Supply from Saelig

The ABI PPS from Saelig is a triple output programmable power supply, with each channel independently adjustable.  Each output can provide 40W of power (1A @ 40V rising to 8A @ 5V under all AC supply conditions) with a resolution of 1mV and 1mA. All PPS channels are isolated and have equal capabilities. The output polarity can even be reversed under software control, removing the need to swap cables to supply negative voltages.  In combined operation, the channels can be placed into arbitrary groups for easy multichannel control. Any number of channels can be added to a group, and up to 3 independent groups can be created. Grouped channels remain isolated but work to achieve a common goal, these include:

• Isolated Voltage Tracking – channels are set equal to the group’s voltage limit but have independent current control. This can be used to generate tracking bipolar voltages or tracking unipolar voltages relative to different grounds.

• Power Sequencing – channels respond to a group On/Off control.

• Voltage Stacking – When voltages above 40V are required, channels can be externally wired in series. The group’s set voltage will be divided equally between all members of the group to make efficient use of each channels power envelope and the group’s current limit will be applied to all members equally.

• Parallel – When currents above 8A are required channels can be externally wired in parallel. The group’s set current limit will be divided equally between all members of the group to make efficient use of each channel’s power envelope and the group’s voltage limit will be applied to all members equally.

The ABI Programmable Power Supply (PPS) is a new module in the System 8 series of automated test modules, but the PPS can also be used as a versatile standalone PC-controlled power supply.  The System 8 range of modules are designed for PCB repair and end-of-line testing, controlled by simple-to-use but versatile Ultimate software.  The PPS features remote sense and low ripple/noise, suits a wide variety of test and measurement scenarios, and can be preprogrammed with ABI’s Ultimate sequencing software. From low to medium volume production test, through to predictive/corrective and PCB troubleshooting tasks, the PPS can be programmed for criteria such as: voltage, current, and power comparison Pass/Fail testing or power sequencing soak tests, with preset targets, comparisons and traceability also available. The convenient front panel RGB LEDs indicate each output state, including fault conditions and channel identification.   Customizable, programmable, and automatic voltage and current protections are available.

Made in Europe by ABI Electronics Ltd., a leading embedded test equipment manufacturer, the ABI Programmable Power Supply (PPS), is available now from ABI’s technical distributor Saelig Company, Inc., Fairport, NY.

Jun 20, 2019 -

Saelig Introduces Economical SAE106S Digital PCB Microscope

Jun 19, 2019 -

Saelig Introduces the PCBite System For Precise PCB Probing

May 31, 2019 -

Saelig Introduces Java-on-a-Chip For Fast Controller Development

May 01, 2019 -

Saelig Introduces Economical Versatile Siglent SDL1000X/X-E Series Programmable DC Loads

Apr 03, 2019 -

Saelig Introduces R5x50 Real-Time 8/18/27GHz Spectrum Analyzers

Mar 27, 2019 -

Saelig Introduces PicoScope 4 Channel 5GHz Sampler-Extended Real Time Oscilloscope

Jan 28, 2019 -

Saelig Introduces Economical Siglent SDS5000X 350MHz-1GHz Oscilloscopes

Jan 24, 2019 -

Saelig Introduces TGF4000 Series 14/16-Bit Advanced Arbitrary Signal Generators With Outputs to 240MHz

Dec 21, 2018 -

Saelig Introduces Flicker Spectrometer To Quantify Light Flicker Measurements

Nov 29, 2018 -

Saelig Introduces USB 3.0 SuperSpeed Isolator For Electrical Isolation of USB Ports

48 more news from Saelig Co. Inc. »

Nov 12, 2019 -

Investing in Industry 4.0: IPC Launches IPC CFX Industry Support Programs

Nov 12, 2019 -

Nordson ASYMTEK's Vortik® Series of progressive cavity pumps dispenses one- and two-component fluids during electronics manufacturing

Nov 12, 2019 -

MIRTEC Europe Wins “Best of Industry” Award

Nov 12, 2019 -

Scienscope Provides Microfocus X-ray to E.M.I.

Nov 12, 2019 -

Specialty Coating Systems to exhibit Parylene conformal coatings for the medical device industry

Nov 12, 2019 -

Data I/O Demonstrates Programming Technology Leadership for Automotive Applications at productronica

Nov 12, 2019 -

Saki Corporation Introduces Automated X-ray Inspection for IGBT Power Modules at Productronica Stand A2.259

Nov 12, 2019 -

Lian Li Joins VJ Group as General Manager for VJE/VJT Suzhou China

Nov 12, 2019 -

Indium Corporation’s Industry Partners to Feature ‘Live@Productronica’ Demonstrations

Nov 12, 2019 -

Press preview for Seica Group participation at Productronica, Munich, November 12 – 15, 2019, Hall A3, Booth A3-337, New Munich Trade Fair

See electronics manufacturing industry news »

Saelig Introduces Versatile 120W Triple Output Programmable Power Supply for Automated Test Applications news release has been viewed 27 times

  • SMTnet
  • »
  • Industry News
  • »
  • Saelig Introduces Versatile 120W Triple Output Programmable Power Supply for Automated Test Applications
IPC Apex 2020 Tradeshow

pcb assembly equipment - robotek