SMT, PCB Electronics Industry News

Fixtureless PCB Testing

Oct 18, 2018

Electrical Testing

At smt assembly line company, they guarantee 100% electrical testing on all PCBs that leave our facilities. they make this guarantee in order to ensure both the quality of our work and the satisfaction of our clients. Electrical testing, in the world of PCB manufacturing, is the process of checking the electrical conductivity of a finished PCB against the NETLIST file that was defined during the project’s design stages, before the PCB layout was created. Using the NETLIST from the design stages offers protection not only against discrepancies which may occur during production, but also against those which may occur during PCB layout or Gerber file generation.

The Flying Probe Method

The Flying Probe Method is a type of electrical testing that is largely reserved for small-volume production. During this procedure, electro-mechanically-controlled test probes are moved through the board, testing for expected electrical values at various predefined test points, in sequence. This testing method has existed nearly as long as the more well-known “Bed of Nails” In-Circuit Test (ICT), but it did not enjoy widespread industry adoption until the early 2000s. Low-cost and open-source PCB design software was beginning to allow for smaller businesses and even hobbyists to design boards for professional production. Meanwhile, professional designers were looking for a cost-effective solution for the fabrication and assembly of their prototype runs.

Going Fixtureless

The largest barrier to low-cost, low-volume PCB fabrication and assembly was the cost of designing and building a fixture to be used during ICT. A unique fixture must be created to test each new PCB design, and these fixtures can present complex devices which incorporate numerous preciselyplaced testing and tooling pins. The time and resources required for PCB manufacturing facilities to build these fixtures, relative to the number of PCBs being assembled, is simply not viable for many designers. 

This untapped corner of the market, not being served by the industry at large, prompted many facilities to take a second look at the Flying Probe’s possible advantages.

Advantages in Cost and Efficiency

The Flying Probe offers a superb solution for low-volume production by eliminating the cost of fixture design and production from the equation. Though each individual board test may take marginally longer using the Flying Probe, the time savings incurred by avoiding fixture creation will more than compensate for this fact, so long as order quantity remains low. The removal of fixture cost from lowvolume PCB assembly services has opened the market to many new avenues, and the widespread adoption of Flying Probe testing has allowed for some additional benefit in terms of functionality as well.

Advantages in Function

In addition to its advantages in terms of price and time requirement, this procedure also offers some functionality that cannot be achieved by the “Bed of Nails” ICT. First of all, the probes are capable of making precision connections at a tighter pitch than the ICT is able to achieve. High-accuracy flying probes boast an incredible electrical test pitch of 0.1mm, compared to the standard ICT’s 0.5mm pitch, allowing for greater coverage on small and/or HDI (High-Density Interconnect) PCBs. 

The Flying Probe can also employ automated optical inspection (AOI) to allow for some specific tests that are not possible using a Bed of Nails. AOI-assisted Flying Probes can catch polarity reversals, low-value components, and individual components in parallel; none of these tests can be performed using a standard ICT fixture.

The Best of Both Worlds

At PCB production company, they offer both Flying Probe and “Bed of Nails” ICT electrical testing, and our expert staff will work with you every step of the way to determine the best fit for your particular project. For low-volume and prototype assembly projects, they are happy to offer Flying Probe testing to save you those fixture costs. For some high-volume projects, customer may want a Flying Probe test to be performed in addition to the ICT for added functionality, and in this we are also happy to oblige. Depending on the specifics of your design and the quantity of your order, as well as your own personal preference, they will select the most cost-and-time-efficient method to ensure the quality and accuracy of every PCB that leaves our facility.

http://www.flason-smt.com/new/Fixtureless-PCB-Testing.html

When SMT matter to your business, partner with Flason. Where innovation takes form.
reflow oven lead free reflow oven LED strip reflow oven dual rail reflow oven custom reflow oven China reflow ovenSMT Peripheral Equipment SMT reflow oven 
wave soldering machine pick and place machine lead free wave soldering machine custom wave soldering machinecustom pick and place machine SMT Assembly line
SMT Reflow Oven Manufacturer Wave Soldering Mahchine Manufacturer Pick and Place Machine Manufacturer Reflow Oven Manufacturer SMT Spare Parts LED Pick and Place Machine
Andrey: sales@flason-smt.com Wechat whatsapp:+86 13691605420

Keywords: Reflow Oven SMT Reflow Oven Wave Soldering Machine SMT Stencil Printer Pick and Place Machine SMT Inspection machine SMT Assembly Line SMT Peripheral Equipment SMT Spare Parts reflow oven lead free reflow oven LED strip reflow oven dual rail reflow oven Custom reflow oven China reflow oven SMT Peripheral Equipment SMT reflow oven wave soldering machine pick and place machine lead free wave soldering machine custom wave soldering machine custom pick and place machine SMT Assembly line SMT Reflow Oven Manufacturer Wave Soldering Mahchine Manufacturer Pick and Place Machine Manufacturer Reflow Oven Manufacturer SMT Spare Parts LED Pick and Place Machine

For More information,visit US: Reflow Oven Manufacturer or SMT Reflow Oven Wave Soldering Machine SMT Stencil Printer Pick and Place Machine SMT Inspection machine SMT Assembly Line SMT Peripheral Equipment SMT Spare Parts SMT Feeder SMT Nozzle Feeder storage cart USB Flash Drive Manufacturer wave soldering machine manufacturer Email us: sales@flason-smt.com

Dec 08, 2018 -

Lead-Free (Pb-Free) Solder and Composition

Dec 08, 2018 -

All about Semiconductor

Dec 08, 2018 -

Top 10 Consumer Electronics Companies in the World

Dec 08, 2018 -

How Electronic / Electrical Circuit Works

Dec 08, 2018 -

Ball Grid Array (BGA) Package

Dec 08, 2018 -

SMT Dictionary – Surface Mount Technology Acronym and Abbreviation

Dec 08, 2018 -

Printed Circuit Board (PCB) for Surface Mount Technology (SMT)

Dec 08, 2018 -

Basic Soldering Guide – How to Solder Electronic Components

Dec 08, 2018 -

RoHS Guide in Electronics: RoHS, WEEE and Lead-Free FAQ

Dec 08, 2018 -

Electronic Components, Parts and Their Function

133 more news from Flason Electronic Co.,limited »

Apr 23, 2024 -

New Energy Automotive: I.C.T.'s Conformal Coating Line Expertise in Mexico

Apr 22, 2024 -

ZESTRON Welcomes Whitlock Associates as new Addition to their Existing Rep Team in Florida

Apr 22, 2024 -

Camera Microscopes: A Game Changer for Electronics Manufacturing

Apr 22, 2024 -

SMTXTRA Appoints MaRC Technologies as Representative for the Pacific Northwest

Apr 22, 2024 -

ZESTRON Welcomes Angela Marquez as Head of Business Unit, Latin America

Apr 22, 2024 -

Apollo Seiko's J CAT LYRA + ARC 5000 Goes Beyond Traditional Soldering at SMTA Wisconsin

Apr 22, 2024 -

SMTXTRA Partners with Kurt Whitlock Associates to Expand Presence in Florida

Apr 22, 2024 -

South-Tek Systems Strengthens Sales with Addition of Jim Vaccaro as Industrial Sales Manager

Apr 22, 2024 -

Apollo Seiko Showcases Desktop Soldering Robot at Electrical Wire Processing Technology Expo

Apr 22, 2024 -

Year of Innovation: ViTrox Technologies Wins Prestigious New Product Introduction Awards

See electronics manufacturing industry news »

Fixtureless PCB Testing news release has been viewed 741 times

ICT Total SMT line Provider

Conductive Adhesive & Non-Conductive Adhesive Dispensing