SMT, PCB Electronics Industry News

FKN Systek, Inc. --- 3 Blade N100 Nibbler

Sep 06, 2019

N100 Nibbler & Blades

N100 Nibbler & Blades

Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Three blade types are available in standard thicknesses of 0.120", 0.093", and 0.062". Custom sizes to match the width of the routed section can be ground on request. Tabs up to 0.324" (8.23mm) are cut cleanly on each side so that no further clean up is required to remove excess material, as is often the case when using hand tools or when breaking the panels manually. In addition, since only one tab is cut at a time, minimal stress is imparted to the board during the process as the panel is not pressed between two points during the cut.

The N100 is provided with a quick connect pneumatic port which plugs directly into 80-100 PSI factory air. Stepping on a foot pedal activates the cutting process. The excess material from the tab is stored inside a compartment of the tool and can be easily removed at the convenience of the operator. To see a video of the N100 and other depaneling methods go to www.fknsystek.com.

The Sharp Blade support dies of the N100 provide a clean shearing action, ideal for singulating one tab at a time on Flex Circuit boards. This is the perfect tool for low volume singulation of a variety of Flex Circuit and standard PCBs built on a rectangular pattern.

Come by booth 107 at SMTAI Rosemont, on September 24 and 25 to see FKN Systek Depaneling tools. Bring samples for evaluation.

For more information see or home page at www.fknsystek.com, call Werner Christ at 508 376 2500 or Email fkn@fknsystek.com

Contact: Werner Christ

FKN Systek, Inc. -- 115 Pleasant Street -- Millis, MA 02054 -- USA

Tel: 508-376-2500 Fax: 508-376-2505

Sep 13, 2019 -

PCB Work Holding Trays L shaped

Apr 23, 2019 -

Custom Crimp Dies for FKN C200 Pneumatic Press

Jun 14, 2018 -

Quick Adjust PCB Racks

Jul 18, 2017 -

Singulating Pre-Scored PCB Panels up to 48”Long

Jan 25, 2017 -

Low Cost Nibbler for Singulating Tab Routed Boards

Jan 13, 2017 -

K5000 High volume pre-scored PCB Depanelizer for LED light strip at Apex 2017

Nov 17, 2016 -

The N200 Punch Singulates Tab Routed PCBs

Sep 15, 2019 -

KIC in Booth #1218 at SMTAI: Industry 4.0 Automation, Traceability & More!

Sep 13, 2019 -

PCB Work Holding Trays L shaped

Sep 13, 2019 -

CELEBRATING 15 YEARS OF EXCELLENCE!

Sep 13, 2019 -

Nordson ASYMTEK Demonstrates the Helios Dispenser for 1K and 2K Materials for Electronics Manufacturing at Bondexpo 2019

Sep 12, 2019 -

i4.0 Connect Forum - Fremont Marriott Silicon Valley

Sep 12, 2019 -

Schleuniger, Inc. to Exhibit Latest Wire Processing Innovations at M-Expo

Sep 12, 2019 -

Schleuniger, Inc. to Exhibit Latest Wire Processing Advances at ATX Minneapolis

Sep 12, 2019 -

Schleuniger, Inc. to Exhibit Latest Wire Processing Advances at The ASSEMBLY Show

Sep 11, 2019 -

Emerging Technologies Take Center Stage at IPC Electronics Materials Forum

Sep 11, 2019 -

ZESTRON’s Terry Price will be Presenting at SMTA International 2019

See electronics manufacturing industry news »

FKN Systek, Inc. --- 3 Blade N100 Nibbler news release has been viewed 65 times

Fast PCB Assembly

BGA Rework Services