SMT, PCB Electronics Industry News

Adept Technology, Inc. Reports First Quarter Fiscal 2008 Results

Nov 08, 2007

LIVERMORE, Calif.--(BUSINESS WIRE)--Nov. 8, 2007--Adept Technology, Inc. (NASDAQ: ADEP) today announced financial results for its fiscal 2008 first quarter, ended September 29, 2007.

Revenues in the fiscal 2008 first quarter were $13.7 million, up 7% year over year from $12.7 million in the first quarter of fiscal 2007 and up 10% on a sequential basis from $12.3 million in the fourth quarter of fiscal 2007. Recovery of demand for Adept products in the U.S. and continued strong demand in Europe drove higher revenues.

Gross margin was 53.5% of revenue in the first quarter of fiscal 2008, compared with 46.5% of revenue in the first quarter of fiscal 2007 and 44.9% in the fourth quarter of fiscal 2007. Improvement in gross margin was primarily due to favorable product mix, incremental software licensing revenue, positive currency effect on pricing in the quarter and lower product manufacturing costs as a result of the Company's ongoing cost reduction activities.

Operating expenses in the first quarter of 2008 were $6.8 million, including $251,000 in restructuring charges, compared with operating expenses of $7.0 million in the same quarter of fiscal 2007, in which no restructuring expenses were recorded. Operating income was $549,000 in the first quarter of fiscal 2008, compared with operating loss of $(1.1) million in the first quarter of fiscal 2007.

Adept reported net income of $293,000, or $0.04 per share for the first quarter of fiscal 2008, versus net loss of $(785,000), or $(0.10) per share, for the first quarter of fiscal 2007.

Adjusted EBITDA was $1.1 million in the first quarter of fiscal 2008, compared with ($318,000) in the first quarter of fiscal 2007 and ($2.0) million in the fourth quarter of fiscal 2007. A discussion of this non-GAAP measure and reconciliation of this measure to the applicable GAAP measure is included below.

Adept's cash and short-term investment balance at September 30, 2007 was $9.9 million, as compared to $10.9 million at June 30, 2007. Accounts receivable, which reflects the timing of cash yet to be collected, was up $2.0 million in the fiscal 2008 first quarter compared with the previous quarter.

John Dulchinos, president and chief operating officer of Adept Technology, commented, "The results of our first quarter validate our strategy of targeting a select group of high-growth vertical markets. We are also very excited to have received our first major order for Quattro(TM), a truly innovative robot that is the centerpiece of our strategy to offer high-speed capabilities across a range of applications in our target verticals. We expect to begin shipping Quattro robots for this program beginning in the second quarter."

"We're very pleased with the results of the first quarter," said Robert Bucher, chief executive officer of Adept Technology. "Our base operating expenses were down 11% sequentially in the first quarter as a result of our restructuring actions, with additional benefit expected to be realized in future quarters. We recorded strong and balanced sales of Viper (TM) 6-axis articulated and Cobra(TM) SCARA robots in the U.S. and Europe. We now have a business that is sized to be profitable and to support growth. We also have the core products and programs to drive that growth across our target markets of Packaging, Life Sciences, Disk Drive and Semiconductor/Solar."

During the fiscal 2008 first quarter, Adept:

  • Experienced increased system and service product demand in the U.S. and Europe, resulting in one third of total revenues coming from the Packaging and Life Sciences vertical markets.

  • Shipped its 500th Adept Viper(TM) 6-Axis robotic mechanism, which combines advanced robot technology with seamlessly integrated vision and sensing to provide unique capabilities in the marketplace.

  • Launched the Adept Packaging Market initiative to promote Quattro and Inverted Cobra packaging robots.

  • Signed three new distributors in the U.S. and two new distributors in South America as part of the Company's initiative to expand its indirect sales channels.

Fiscal 2008 Outlook

For fiscal 2008 as a whole, the Company currently expects revenues to increase to $52.0 million to $57.0 million, an increase of 5% to 15% from fiscal 2007 levels. The Company further expects to record net income of $800,000 to $2.3 million and adjusted EBITDA of $2.75 million to $4.5 million, and to be cash flow positive.

Conference Call and Simultaneous Webcast-:

Robert Bucher, Chief Executive Officer, John Dulchinos, President and Lisa Cummins, Vice President and Chief Financial Officer, will host an investor conference call today, November 8, 2007, at 5:00 P.M. Eastern Time to review the Company's financial and operating performance for the fiscal 2008 first quarter. The call will be open to all interested investors through a live audio Web broadcast via the Internet at or may be accessed through the investor relations section of our website at For those who are not available to listen to the live broadcast, the call will be archived at, and A telephonic playback of the conference call will also be available for five days. Listeners should call 719-457-0820 or 888-203-1112 and use CODE No. "4411742".

About Adept Technology, Inc.

Adept Technology, Inc. designs, manufactures and markets robotic systems, motion control and machine vision technology for global markets including automotive, consumer electronics, consumer goods, disk drive, food, industrial tooling, medical devices, and pharmaceutical. Adept robots, controllers, and software are used for small parts assembly, material handling and packaging. Adept intelligent automation product lines include industrial robots, configurable linear modules, machine controllers for robot mechanisms and other flexible automation equipment, machine vision, and systems and applications software. Founded in 1983, Adept Technology is the largest U.S.-based manufacturer of industrial robots. More information is available at

All trade names are either trademarks or registered trademarks of their respective holders.

About Non-GAAP financial measures:

In addition to presenting net income in accordance with GAAP, we have determined that adjusted EBITDA, which we define as earnings before interest income, income taxes, depreciation and amortization, and stock-based compensation expense under SFAS No. 123(R), is a relevant measure of performance for our company as an approximate measure of operating cash flow, as it is a metric commonly used among technology companies and provides meaningful supplemental information regarding our operating performance. As a result, we believe it is a helpful tool for communicating our performance to our investors and analysts and for comparisons to other companies within the technology industry.

Adjusted EBITDA should be considered in addition to, but not as a substitute for, other measures of financial performance reported in accordance with accounting principles generally accepted in the United States. For more information on our adjusted EBITDA, please see the table captioned "Reconciliation of Adjusted EBITDA Calculation to GAAP Accounting" included below. While we believe that adjusted EBITDA is useful within the context described above, it is in fact incomplete and not a measure that should be used to evaluate the full performance of the Company or its prospects. Stock-based compensation has been and will continue to be for the foreseeable future a recurring expense for our business and an important incentive component of executive and other employee compensation. Such evaluation needs to consider all of the complexities associated with our business including, but not limited to, how past actions are affecting current results and how they may affect future results, and how regulations and the other aforementioned items affect the final amounts that are or will be available to shareholders as a return on their investment. Net income determined in accordance with GAAP is the most complete measure available today to evaluate all elements of our performance. Similarly, our Consolidated Statement of Cash Flows, as presented in our filings with the Securities and Exchange Commission, provide the full accounting for how we have decided to use resources provided to us from our customers and shareholders.

Mar 06, 2013 -

Adept Technology Appoints Glenn Hewson as Senior Vice President of Global Marketing

Jan 21, 2013 -

Lynx Creates New Category of Material Handling Automation

Jan 17, 2013 -

Adept Technology Introduces Simplified Robotic Parts Feeding Solution

Oct 24, 2012 -

Adept Technology Introduces SmartController EX

Oct 09, 2012 -

Adept Technology Introduces Cobra(TM) Refurbishing Program

Sep 12, 2012 -

Adept Technology Appoints Cornerstone Technical Group as Distributor in Southeastern United States

Sep 12, 2012 -

Adept Technology Appoints Cornerstone Technical Group as Distributor in Southeastern United States

Sep 05, 2012 -

Adept Technology Products Selected to Automate Leading Semiconductor Foundry

Aug 21, 2012 -

Adept Technology to Announce Fiscal 2012 Fourth Quarter and Year End Financial Results

Aug 08, 2012 -

Adept Technology Introduces ClamPAC™ Robotic Packaging Automation Cell for Case Packing Clamshells

56 more news from Adept Technology Inc. »

Aug 14, 2018 -

Saki Self-Programming 3D Inspection Software is Fast, Easy, and Doesn't Require a Programmer

Aug 14, 2018 -

ITW EAE to Demonstrate Electrovert® Inline Cleaning Solution at IMTS Show in Chicago

Aug 13, 2018 -

PVA brings advanced coating/dispensing equipment to The Battery Show

Aug 13, 2018 -

STI Recognizes James Nicholson’s 20-Year Anniversary

Aug 13, 2018 -

Thermaltronics H-Series Replacement Tips

Aug 13, 2018 -

Datest – SMTA Corporate Member of the Month

Aug 12, 2018 -

Thermaltronics Adds New Soldering Tip Cartridge Ranges

Aug 12, 2018 -

President Trump to Sign Legislation on Monday to Focus Leadership and Resources on Defense Electronics

Aug 12, 2018 -

CyberOptics Demonstrates Industry-Leading Airborne Particle and Ultra High-Resolution MRS Sensors at SEMICON Taiwan Significantly Improving Yields and Tool Uptime in Semiconductor Fabs Worldwide

Aug 12, 2018 -

Leading Cleaning Technologies to be Featured at SMTA Austin by ZESTRON

See electronics manufacturing industry news »

Adept Technology, Inc. Reports First Quarter Fiscal 2008 Results news release has been viewed 54 times

SMT Equipment

Plasma Prior to Conformal Coating