SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Juki Corp.'s CX-1 Advanced Placement System Wins Attendee's Choice Award at SEMICON West 2008

Juki Corp.'s CX-1 Advanced Placement System Wins Attendee's Choice Award at SEMICON West 2008

Jul 23, 2008

MORRISVILLE, NC - July 2008 - Juki Corporation, a world-leading provider of automated assembly products and systems, announces that its CX-1 Advanced Placement System has won the Attendee's Choice Award in the Best Solution to a Problem category among �Final Manufacturing� products. The award presentation took place July 16, 2008 on the show floor of the SEMICON West 2008 exhibition. Juki highlighted CX-1 in booth 7360 on Level 1 of the West Hall.

The CX-1 is an innovative advanced placement system that is capable of placing advanced packages and features high-accuracy applications as well as standard SMT. The CX-1 is capable of placing SiP, MCM and other mixed-technology applications. This flexibility ensures users of high-quality placements and contributes positively to its lines. Also, the CX-1 is built on the base of a standard SMT machine, but with highly accurate glass linear encoders. Special software periodically checks and calibrates to ensure ultra-high accuracy.

With traditional lines, four machines are necessary; however, with the CX-1, only three systems are used to accomplish the same production levels. This technologically advanced capability also leads to key savings in time and reduced number of operators. The CX-1 addresses the industry challenge of increasing use of bare die and flip chips mixed with standard SMT (such as cell phones, PDAs, etc.).

With the highest placement accuracy and lowest cost of ownership, the placement machine offers fast throughput for SMT (exceeding typical speed/throughput of competitive placement systems). Additionally, the CX-1 is compatible with existing feeders and line control software (HLC). The system is based on proven technologies and is more economical than dedicated machines. In regard to cost effectiveness, the system is significantly cheaper than die-attach machines PLUS it can place standard SMT at mid-volume levels. The CX-1 is much less expensive than buying two machines, and also uses less floor space and requires less training (one machine to learn vs. two). The CX-1 contributes high-quality placements to a line. The system features HMS II to measure board surface height and flatness and placement flatness and the placement force control.

The CX-1 comes standard with four placement heads. These heads are capable of laser/vision centering, independent X and theta motors, and can handle boards up to 330 x 250 mm and feature a standard 27 mm FOV high-resolution camera.

The system itself offers two modes � high accuracy and standard accuracy. The high-accuracy mode features speeds of 1,300 (vision) and 1,600 (laser), and an accuracy of �20 mm. The standard accuracy mode features a speed of 11,000 cph and an accuracy of �40 mm.

Sponsored by Solid State Technology Magazine, in cooperation with Advanced Packaging Magazine, the Attendee's Choice Awards is now in its sixth year. SEMICON West attendees vote on products seen on the trade show floor. There are two separate competitions: one for �Wafer Processing� products and one for �Final Manufacturing� products.

Juki Corporation's experience as the market leader in industrial sewing machines was the stepping-stone for the entry into the printed circuit board assembly market in 1987. Since then, Juki has delivered more than 20,000 automated assembly systems worldwide and is currently shipping an average of 200+ assembly machines per month. This extraordinary achievement makes Juki one of the world's leading providers of automated assembly products and systems. In addition to its core technologies, Juki's Electronic Assembly and Test Systems Division develops and manufactures advanced electronic systems and computer software for data entry, mail processing and other electronic equipment.

With the purchase of Zevatech's ass in November 1999, Juki Automation Systems now brings Juki's reputation for top quality and reliable service also to the North and South American and the European electronics assembly markets. Juki recognizes the challenges of the new century and is prepared to respond to the globalization of electronic manufacturing. With a sophisticated knowledge base, advanced technologies and a high commitment to its customers, Juki is poised for continued growth in the 21st century.

Sep 17, 2018 -

Screen Printing, Component Storage & Placement Equipment from Juki at SMTAI

May 22, 2018 -

Europlacer to Show Full Assembly Line Products & Solutions at SMT Nuremberg.

May 03, 2018 -

Juki Automation Systems Announces Growth in Mexico

Mar 29, 2018 -

GKG Recognizes Juki Automation Systems’ Robert J. Black, Jr.

Feb 27, 2018 -

New Juki Printer Recognized with NPI Award during APEX

Jan 28, 2018 -

Juki to Demo Three SMT Lines at the IPC APEX EXPO

Jan 15, 2018 -

Juki Announces Greg Lefebvre as Regional Sales Manager for the Americas

Oct 25, 2017 -

Juki Recognizes Methods Automation for Outstanding Sales Performance

Oct 23, 2017 -

W.J. Murphy Associates Receives Outstanding Achievement Award from Juki

Oct 19, 2017 -

Juki Automation Systems Awards Quantum Systems ‘Representative of the Year –Best Performance’

255 more news from Juki Automation Systems »

Sep 18, 2018 -

Koh Young Technology highlighted the versatile Meister system at Semicon Taiwan

Sep 17, 2018 -

Essemtec to Show FOX2 with Micro Valve / Placement System at SMTAI

Sep 17, 2018 -

SMART Storage Systems – Visit Inovaxe in Booth #715 at SMTAI

Sep 17, 2018 -

Stencil Printer with Fully Integrated 3D SPI from Kurtz Ersa Inc. at SMTA

Sep 17, 2018 -

MIRTEC Features Award-Winning 3D AOI and SPI Systems at SMTAI 2018

Sep 17, 2018 -

Cogiscan exhibits new solutions at SMTAI to enable Industry 4.0

Sep 17, 2018 -

Extremely fast and precise inspection for high-volume production from Viscom at SMTA

Sep 17, 2018 -

Screen Printing, Component Storage & Placement Equipment from Juki at SMTAI

Sep 17, 2018 -

Automatic Table-top Component Counter from Scienscope at SMTAI

Sep 17, 2018 -

KIC to Demo Auto Profiling and Intelligent Network Software Ecosystem at SMTAI

See electronics manufacturing industry news »

Juki Corp.'s CX-1 Advanced Placement System Wins Attendee's Choice Award at SEMICON West 2008 news release has been viewed 53 times

  • SMTnet
  • »
  • Industry News
  • »
  • Juki Corp.'s CX-1 Advanced Placement System Wins Attendee's Choice Award at SEMICON West 2008
SMT Custom Nozzles

 Reflow System