SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO

Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO

Feb 14, 2011

At the show, Seika will debut the MC-1002 PCB Storage Cabinet for the first time. The low-cost, high performance cabinet was developed to assist companies that are trying to conform to IPC-1601 August 2010 Printed Board Handling and Storage Guidelines.

At the show, Seika will debut the MC-1002 PCB Storage Cabinet for the first time. The low-cost, high performance cabinet was developed to assist companies that are trying to conform to IPC-1601 August 2010 Printed Board Handling and Storage Guidelines.

TORRANCE, CA - Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will debut new products and features from McDry in Booth #459 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

At the show, Seika will debut the MC-1002 PCB Storage Cabinet for the first time. The low-cost, high performance cabinet was developed to assist companies that are trying to conform to IPC-1601 August 2010 Printed Board Handling and Storage Guidelines.

The cabinet is ESD-IEC61340-5-1 compliant and grounded to prevent static electricity. The system is equipped with a digital RH meter and maintains a 3 percent RH level. Additionally, the PCB storage cabinet features locking doors and adjustable shelves that can hold up to 220lbs.

Also on display, the DXU-580AF Feeder Storage Cabinet features an ergonomic design for smaller quantity storage that may be placed on each line. This system can hold up to 20 feeders depending on the reel size and is ergonomic because it uses a sliding shelf for ease of installation and removal. The height and angle also are designed for most operators to handle feeder storage easily. As an option, this model features one shelf for storage of trays and extra reels.

The MB-301 Low Temperature & Low Humidity Baking Cabinet features a 40C° baking temperature, as well as a 5 percent RH humidity level during bake out period and 3 percent RH level in dry storage. The cabinet’s electrostatic discharge conforms to the IEC-61340-5-1 (ESD) Standard for Handling. The MB-301 cabinet comes standard with a drying unit and can be used as a regular dry storage cabinet when heater for baking is turned off. Additional features include a large display digital RH meter and a 1MΩ ground terminal.

Seika also will highlight new features for McDry Storage Cabinets, including the McDry Signal Tower and ERC-301AD Hygrometer with Alarm System. With the new hygrometer, the light signal will flash and audible alarm will sound off when the humidity level goes over the set limit over a fixed period of time. After the alarm flashes, the unit will save ten data readings, one per hour.

Visit Michelle Ogihara, Sales & Marketing Manager, in Booth #459 at the show to discuss the new McDry products and features. For more information about McDry Storage Cabinets, visit http://www.seikausa.com.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Aug 08, 2022 -

Seika Machinery Offers Service and Repairs for Its Leading Brands

Jul 16, 2022 -

Seika Machinery's Malcom RCX-1 Series offers complete monitoring of the reflow profiling process

Jul 08, 2022 -

Seika Machinery's Malcom Wetting Balance Tester Takes Testing a Step Further

Jun 24, 2022 -

Seika Machinery Presents New Flagship Viscometer from Malcom

Jun 16, 2022 -

Summer Sale on Select McDry Dry Cabinets

Jun 16, 2022 -

Seika's Sawa Eco-Roll Reduces Waste and Saves Money

Jun 02, 2022 -

Seika Announces Inventory Sale on Stock SAYAKA PCB Routers

Apr 28, 2022 -

Seika Offers Optimized Sawa Mask Condition Checker with New Options

Apr 06, 2022 -

Seika offers a wide range of Sawa cleaners for quality assurance

Mar 17, 2022 -

Two Chances to Meet with Seika Machinery at the SMTA Dallas & Houston Expos

260 more news from Seika Machinery, Inc. »

Aug 09, 2022 -

ViTrox PCB SMT Vision Inspection Solution Adopts the IPC CFX Standards

Aug 08, 2022 -

IPC Offers First Advanced Packaging Symposium Building the IC-Substrate and Package Assembly Ecosystem

Aug 08, 2022 -

Seika Machinery Offers Service and Repairs for Its Leading Brands

Aug 08, 2022 -

IPC E-mobility, Quality & Reliability Advisory Council Members to Speak at Electric and Hybrid Vehicle Tech Expo/The Battery Show North America

Aug 08, 2022 -

DFI, Inc. Earns IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing

Aug 08, 2022 -

Indium Corporation's Donna Vareha-Walsh Elected to American Tin Trade Association Board of Directors

Aug 08, 2022 -

STI to Sponsor "J-STD-001H Objective Evidence for Reliability Workshop" Presented by Magnalytix and Restronics Southeast

Aug 08, 2022 -

Torenko & Associates offers the new 3D SPECTASCOPE™ from WPI Vision

Aug 08, 2022 -

Learn how KYZEN's METALNOX 6324CP provides long-term rust protection at ExpoAcero

Aug 08, 2022 -

Altus Introduce Promation USA's Next Leap in Robotic Soldering Technology

See electronics manufacturing industry news »

Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO news release has been viewed 806 times

  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO
Selective Conformal Coating System - GPD SimpleCoat

MSD Dry Cabinets