SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Virtual Industries to Display Vacuum Handling Solutions at MD&M Florida 2011

Virtual Industries to Display Vacuum Handling Solutions at MD&M Florida 2011

Feb 14, 2011

The Small Part Handling Kit (TV1000-SP8-BD-MAG1) is for parts as small as 100 µm. The compact unit will handle a variety of optics, ball lenses and SMT parts used in the industry today.

The Small Part Handling Kit (TV1000-SP8-BD-MAG1) is for parts as small as 100 µm. The compact unit will handle a variety of optics, ball lenses and SMT parts used in the industry today.

The SMD-VAC™-HP 110 Volt System (V8100A-SP8-BD-MAG1) runs on 12 VDC with a precision pump and motor that generates over 15

The SMD-VAC™-HP 110 Volt System (V8100A-SP8-BD-MAG1) runs on 12 VDC with a precision pump and motor that generates over 15" of mercury; the tool provides additional pick-up power for handling small to very large sized components.

The Mini Vacuum Pumps for OEM applications (VMP1621CN and VMP1625MX) can be used for applications requiring air flow, vacuum or air pressure.

The Mini Vacuum Pumps for OEM applications (VMP1621CN and VMP1625MX) can be used for applications requiring air flow, vacuum or air pressure.

COLORADO SPRINGS, CO - Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, announces that it will display several advanced systems in Booth #1342 at the upcoming Medical Design & Manufacturing Florida exposition and conference, scheduled to take place March 15-17, 2011 at the Orange County Convention Center in Orlando, FL.

The Small Part Handling Kit (TV1000-SP8-BD-MAG1) is for parts as small as 100 µm. This general-purpose vacuum handling tool plugs directly into 110 V 50/60 Hz. The compact unit will handle a variety of optics, ball lenses and SMT parts used in the industry today. The kit includes a set of rubber tipped vacuum tips as well as a set of eight small parts tips. Also included, is a 2.5X lighted magnifier that runs on three AAA batteries (included).

Parts as small as 0.05" (0.10 mm) are handled without damage. A vacuum tweezer eliminates lost parts associated with mechanical tweezer handling. The long-life diaphragm vacuum pump generates up to 10" of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord.

The SMD-VAC™-HP 110 Volt System (V8100A-SP8-BD-MAG1) runs on 12 VDC with a precision pump and motor that generates over 15" of mercury; the tool provides additional pick-up power for handling small to very large sized components. 

The system's compact tower design takes up a small footprint on the bench. An electric eye pen holder on the side automatically shuts the unit off when the vacuum pen is placed in it. As an added feature, the jack on the rear of the V8100A series allows the use of a foot switch to control the vacuum during pick-and-place operations.

The Mini Vacuum Pumps for OEM applications (VMP1621CN and VMP1625MX) can be used for applications requiring air flow, vacuum or air pressure. Typical applications include air quality sampling, organic vapor analyzers, equipment requiring a vacuum source, or equipment requiring a pressure source.

The mini vacuum pumps are small, but provide high performance with a motor life of up to 5,000 hours. The pump valves are made of durable stainless steel and the diaphragm is fabric reinforced viton. The pumps come with a 43 micron inlet filter and mounting clip.

For more information about any of Virtual Industries' advanced equipment, stop by Booth #1342 at the show or visit http://www.virtual-ii.com.

Founded in 1987, Virtual Industries Inc. is headquartered in Colorado Springs, Colo. For more than 20 years, Virtual Industries has been a leading supplier of manual vacuum handling solutions to the world’s high-technology firms. The company’s patented ESD-safe products are used by CLASS I clean room personnel, electronics assemblers, semiconductor manufacturers, Universities and scientists globally. Virtual Industries’ success has come from developing innovative manual vacuum handling tools and pick-up tips based on customer requests and customer feed back. These tools provide customer specific solutions that make assembly and processing operations more productive and ergonomic. For more information, visit the company at http://www.virtual-ii.com.

Aug 22, 2018 -

Virtual Industries’ STEALTH-VAC™ ELITE Kit - Vacuum Tweezer Operates on Compressed Air to Provide the Highest Performance Level Available

Jul 17, 2018 -

Virtual Industries’ PEN-VAC™ Kit with 8 Probes + Cups and Vacuum Pen Holder

Jun 11, 2018 -

PAC-VAC™ Kit Cleanroom Handling Tool for up to 6" Wafers and Substrates

Jun 11, 2018 -

Virtual Industries to Exhibit Small Part Handling Tools at SEMICON West

Jun 04, 2018 -

Virtual Industries’ 220 V AC ADJUST-A-VAC® ESD-Safe Kit With Foot Switch, ESD-Safe Delrin Small Parts Tips

Jan 28, 2018 -

Virtual Industries Offers Medtech Handling Solutions at MD&M West

Jan 28, 2018 -

Virtual Industries Demonstrates ADJUST-A-VAC® ESD Safe Kit at APEX

Jan 26, 2018 -

3 Chances to See Virtual Industries' ADJUST-A-VAC® ESD Safe Kit and TWEEZER VAC® Elite ESD Safe Kit

Jan 24, 2018 -

Virtual Industries Shows Small Parts Handling Systems at SPIE Photonics West

Jan 11, 2018 -

Virtual Industries Recognizes Patrick Lemos for 20 Years of Service

74 more news from Virtual Industries, Inc. »

Sep 19, 2018 -

VJ Electronix makes component counting more accurate – Visit us at SMTA International

Sep 19, 2018 -

Specialty Coating Systems Introduces New PrecisionCoat Automatic Quick Change at SMTAI

Sep 19, 2018 -

STI Sponsors SMTA International

Sep 19, 2018 -

Nordson Test & Inspection Announces AOI and X-ray Lineup for SMTAI

Sep 19, 2018 -

SMTA Welcomes New Board Members

Sep 19, 2018 -

Free Annual SMTA Women’s Leadership Program at SMTAI

Sep 19, 2018 -

CyberOptics to Present Technical Paper ‘Extending 3D MRS Technology to Address Challenging Measurement and Inspection Applications’

Sep 19, 2018 -

IPC Hand Soldering Competition Returns to What’s New in Electronics Live 2018

Sep 19, 2018 -

BTU to Demo New WINCON Oven Control System Release at SMTAI

Sep 18, 2018 -

Lower production costs with solder recovery from EVS – Learn more at SMTAI

See electronics manufacturing industry news »

Virtual Industries to Display Vacuum Handling Solutions at MD&M Florida 2011 news release has been viewed 132 times

  • SMTnet
  • »
  • Industry News
  • »
  • Virtual Industries to Display Vacuum Handling Solutions at MD&M Florida 2011
TWEEZER-VAC ELITE Vacuum SMD Tweezer Kit

Plasma Prior to Conformal Coating