Sony Smt nozzles Sony E1000 AF25200F1 nozzle for pick and place machine

Model:	Sony Smt nozzles Sony E1000 AF25200F1 nozzle for pick and place machine
Part Number:	Sony nozzles E1000 AF25200F1
Category:	SMT Equipment
Model Year:	2018
Condition:	new
Location:	China
Offered by:	KingFei SMT Tech

Smt nozzles Sony E1000 AF25200F1 nozzle for pick and place machine

Smt Sony nozzles models:
E-1000 SMT NOZZLE
Part Number Description
A-8417-333 E1000 PICK UP NOZZLE Ø0.45 / Ø0.2 (0603) AF05021
A-8417-334 E1000 PICK UP NOZZLE Ø0.6 / Ø0.4 (1005) AF06040
A-8417-335D E1000 PICK UP NOZZLE Ø0.6 / Ø0.4 (1005) AF06041
A-8417-336 E1000 PICK UP NOZZLE Ø0.8 / Ø0.5 (1608) AF08050
A-8417-337 E1000 PICK UP NOZZLE Ø1.0 / Ø0.7 (1608) AF10070
A-8417-338D E1000 PICK UP NOZZLE Ø1.0 / Ø0.7 (1608) AF10071
A-8417-339 E1000 PICK UP NOZZLE Ø1.2 / Ø0.8 AF12080
A-8417-340 E1000 PICK UP NOZZLE Ø2.5 / Ø2.0 AF25200
A-8417-341 E1000 PICK UP NOZZLE Ø4.0 / Ø3.0 AF40300
A-8417-342 E1000 PICK UP NOZZLE Ø6.0 / Ø4.0 AF60400
A-8417-332 E1000 PICK UP NOZZLE Ø1.2 / Ø0.8 AB12080

E-2000 SMT NOZZLE
Part Number Description
A-8417-236T E2000 NOZZLE SLIDER Ø 2.0/Ø 1.5 - CF20150
A-8336-437T E2000 NOZZLE SLIDER Ø 2.5/Ø 2.0 - CF25200
A-8336-438T E2000 NOZZLE SLIDER Ø 3.0/Ø 2.5 - CF30250
A-8336-439T E2000 NOZZLE SLIDER Ø6.0/Ø 5.0 - CF60500
A-8336-440T E2000 NOZZLE SLIDER Ø 10.0/Ø 9.0 - CF00900
A-8417-175T E2000 NOZZLE SLIDER (SQUARE TYPE) -CFREC01
A--8417-176T E2000 NOZZLE SLIDER (SQUARE TYPE) -CFREC02
A--8417-177T E2000 NOZZLE SLIDER (SQUARE TYPE) -CFREC03
A--8417-178T E2000 NOZZLE SLIDER (SQUARE TYPE) -CFREC04
A--8417-237T E2000 NOZZLE SLIDER (SQUARE TYPE) -CFREC05

Issues related to improper nozzle/feeder maintenance or use of poor quality nozzles are often the same. Here are some of the most common problems:
1. Poor pickup location on part. It will cause a loss of vacuum and result in parts shifting on the nozzle during transport.
2. Short/worn nozzles result in poor pickup and can cause the part not to be imbedded into the paste. When the part is not placed into the paste correctly there is not enough surface tension to hold the part while the PCB is moving. Parts will shift.