Industry News | 2019-10-15 15:04:38.0
A new technical paper that focuses on the application requirements of printing small apertures and the results of a design of experiment testing will be presented at the upcoming Productronica trade fair in Germany. The paper will be presented by Edward Nauss, MPM Applications Engineer at ITW EAE.
Technical Library | 2020-04-14 15:56:32.0
This paper will focus on the application requirements of solder printing small aperture designs, concentrating on 008004 (inch) / 0201 (metric) size components, and the results of a design of experiment printing these challenging apertures. As Moore's law continues to be applied to component miniaturization, the next installment of reduced packaging has arrived in the form of the 008004/0201 for resistors and capacitors. Component size roughly the size of a grain of sand presents specific challenges to the solder printing process. To address these challenges, each aspect of the printing process will need be examined. This includes essential machine requirements, including correct squeegee blades, tooling support, and calibrations, to meet the demanding specifications. The correct match and design of materials will be addressed, focusing on the stencil and substrate design along with solder paste and cleaning solvent requirements. A design of experiment will be reviewed that applies the machine and materials discussed, including the printer and Solder Paste Inspection (SPI) setup and the specific machine parameters used. The results of these DOE's will then be closely examined.
Parts & Supplies | Pick and Place/Feeders
Base size Min.5.0 mm × 50mm ~ Max. 1200 mm x 360mm * 1 Component height 12.0 mm * 2 Component size 0201(metric 0603) ~ 33.5 mm Component Recognition Device Laser Recognition(LNC 60) Component mount speed best condition 0.187 seconds/chip(19,300
1.jpg)
Parts & Supplies | Pick and Place/Feeders
CL-type Feeder for GEM (-X) series CL-type Feeder for GEM (-X) series CL-type Feeder for GEM(-X)series: Emerald, Topaz, Sapphire, Opal, Topaz-X, Topaz-XII, Emerald-X, Emerald-XII CL8x2mm (CL-823) for 0201 = metric 0603 (PA2903/77, YamahaKW1-M150
Parts & Supplies | Pick and Place/Feeders
ZK Electronic Technology Co.,Limited and electrical suppliers - YAMAHA PHILIPS rack, feeder, feeder suppliers FV-type CL-type for GEM(-X)series: Emerald, Topaz, Sapphire, Opal, Topaz-X, Topaz-XII, Emerald-X, Emerald-XII... CL 8x2mm (CL-823)
Events Calendar | Tue Dec 08 00:00:00 EST 2020 - Tue Dec 08 00:00:00 EST 2020 | Online,
SMTA California Technology Day
.png)
Parts & Supplies | Assembly Accessories
8x2mm PA-NST for 01005 (= 0402 metric), red handle 8x2mm PA-NST for 0201 (= 0603 metric), green handle For SM series machines (400series, 321series: SM320, SM321, SM411, SM421) 8x2mm for 01005, 0201 and 0402 (red, green and blue handle) 8x4mm
Parts & Supplies | Assembly Accessories
samsung SM 8mm/12mm/16mm/24mm feeder NST feeders for CP series 8x2mm PA-NST for 01005 (= 0402 metric), red handle 8x2mm PA-NST for 0201 (= 0603 metric), green handle For SM series machines (400series, 321series: SM320, SM321, SM411, SM421)
Used SMT Equipment | Pick and Place/Feeders
With the SIPLACE SX we have made our most successful placement solution even better: Capacity on Demand: Scale the performance of your SMT lines up or down as needed – quickly and easily The SIPLACE SpeedStar for high-speed and placement of component
Used SMT Equipment | Pick and Place/Feeders
With the SIPLACE SX we have made our most successful placement solution even better: Capacity on Demand: Scale the performance of your SMT lines up or down as needed – quickly and easily The SIPLACE SpeedStar for high-speed and placement of component
