Electronics Forum | Fri May 06 08:39:59 EDT 2016 | kahrpr
The first issue I see is that you have a high potential of the 402 tombstoning.
Electronics Forum | Mon May 09 09:23:45 EDT 2016 | markhoch
I agree with the previous two replies. This is a perfect design....if you're trying to create a graveyard full of tombstones.
Electronics Forum | Tue Jun 07 16:25:29 EDT 2005 | davef
We use a 0.012 inch gap betweem 0402 pads.
Electronics Forum | Tue Jun 07 15:00:10 EDT 2005 | glenda
what about spacing between pads center to center on 0402.
Electronics Forum | Thu May 29 16:37:57 EDT 2008 | aj
10% reduction on 5 thou. Gap between pads is also critical with 0402's.
Electronics Forum | Thu May 29 14:35:37 EDT 2008 | rdmundo
Gents, We've been using a round 1:1 aperture for a 5 mils thickness on our stencil design on 0402 and recently, IPC guidelines recommend oblong, homeplate or reverse homeplate. I believed the PCB pad for 0402's area within the recommended size/dimen
Electronics Forum | Thu May 29 17:19:51 EDT 2008 | dyoungquist
On 0402s we use 20x25 mil pads with a 15 mil gap between the pads on the pcb with ENIG finish, 5 mil stencil with a 1:1 aperture (20x25 mil) and SAC305 lead free solder paste. We very rarely see any tombstoning on 0402s using this setup.
Electronics Forum | Tue Jun 07 19:24:44 EDT 2005 | russ
We use a .010" - .012" gap with .020" square pads.
Electronics Forum | Mon Sep 20 16:46:47 EDT 2004 | cristiano
Do you have any information about the best standart for 0402" chip pad design. I have found differents recomended dimensions from IPC standart and manufacturer(AVX) . Which should be the best one? Thanks
Electronics Forum | Thu Apr 11 14:31:15 EDT 2002 | aaelect
We're having some problems with 0402's tombstoning. On a board with about 300 parts we're getting about 12 to 20 tombstones per board. The caps seem to do it more often than the res. The pads appear to be in accordance with IPC SM 782 amendment 1, S