Electronics Forum | Tue Mar 20 22:53:16 EDT 2018 | maustin
OK, with my masterful powers of deduction, I have been able to resolve the problem. Upon further investigation, it became apparent that the issue was restricted to those components that had the laser alignment level in the component data set to -0.2
Electronics Forum | Mon Feb 10 10:24:43 EST 2003 | gregp
The Universal chipshooter (Sanyo) has automatic X-Y pick-up correction as standard. Are the upside-down resistors an issue for inspection purposes? Do you use AOI? Can you really read markings on 0402 resistors?
Electronics Forum | Tue Aug 02 11:58:44 EDT 2005 | GS
Are the pick up nozzles metal made (ironmagnetic material)? Some time magnetic residual on metal nozzles can generate pbm like that when chips terminations have nickel and when SOt or similar packages have terminal A42 alloy made. Time ago got pbm l
Electronics Forum | Thu Aug 05 20:33:48 EDT 2004 | Dhanish
The machine type is Fuji CP6.We have major issues with Network Resistor placement.The equipment guys often feedback there is a problem with nozzle and feeders.What will happened to the part if the Thickness data in the Part Data does not match the Pa
Electronics Forum | Wed Apr 09 17:39:30 EDT 2008 | diesel_1t
Hi. I know that this is one of the mos common threads here, I have been doing some research, but i didn't find any similar. The main issue is that I have seen tombstoning since two weeks ago, it is more characteristic on 0603 resistors (Stackpole e
Electronics Forum | Thu May 23 05:38:26 EDT 2019 | je_arrow_tech
We have been having some issues recently with a TSOP-II 54 pin, where upon second reflow the part will lift at end one, most of the time the solder will pull up with it and still connect but I still worry about strain on the component as well as it i
Electronics Forum | Wed Sep 13 12:50:44 EDT 2023 | kirill
Greetings, I would like to do a height calibration, because the laser of the machine seems to be out of control, I'll explain why: When I measure the height of a 0402 resistor, I get around -0.60 to -0.70, when I fix it on what the machines has measu
Electronics Forum | Tue Jun 23 09:26:11 EDT 1998 | Stefan Witte
| What is the level of interest in bulk feeding cpassive devices, caps & resistors, 0402,0603,0805? The component mfgs. tell me in 3 years 40% of the passive caps will be bulk fed. Their is currently about a 10% cost savings with bulk over tape & r
Electronics Forum | Thu Sep 29 05:37:56 EDT 2005 | dougs
for 0402's you should be able to run the turret at full speed, if you need to slow it down it means that your machine isn't set up properly. use the vision number that the manual tells you and make sure your feeders are properly calibrated, poorly c
Electronics Forum | Sun Sep 29 09:48:01 EDT 2013 | jvadillo
Hi, we have finally purchased the following second hand equipment: - TWS Quadra pick&place from 2004 - TWS 1100 oven - Motoprint-M automatic screen printer We are quite happy for the price we paid and what we have obtained. The PnP needs some n