Electronics Forum | Wed Jun 14 15:32:16 EDT 2006 | pms
We have recently started building assemblies containing 0402 components (argggg!!). Were using the TM8FC magazines and are seeing alot of miss-picks on the 0402 components. When the feeder advances the part, the part can; jump out of the tape, or tur
Electronics Forum | Tue Apr 13 12:56:16 EDT 2021 | robl
Hi Tonies, Do you place 0201's from any other supplier? if so, do you see similar issues on those parts? There are a lot of things that can go wrong on 0201 & 01005 that aren't the part manufacturer - part data, printing, placement, nozzle sele
Electronics Forum | Sun Jan 30 20:13:32 EST 2022 | chuckphd53
I have a SMT-460 machine that works pretty good for the most part. When placing parts I have an issue with the SOT-23 rotation 90deg. Using both Juki 503 / 504 nozzle it will pick and place all of the 0805 and 1206 resistors/caps just fine. I have 9
Electronics Forum | Thu Apr 30 20:41:52 EDT 1998 | Dave
| We would like to add another pick and place machine to | the SMT line. We're low volume so we change the line over | after each group of boards. So far we've pretty much | ruled out Siplace in favor of the Universal machines. | Does anyone care to
Electronics Forum | Wed Apr 23 10:27:32 EDT 2003 | bernard
Hi Pete, What you are describing is something that will happen regardless of feeder type or machine type. When taking off a partial reel there is the potiential to lose components. It is minimised by careful handling. Yes I would agree that the Myda
Electronics Forum | Thu Jun 28 20:11:32 EDT 2007 | rfrog
Hi folks, I've been bouncing off of MyData technical support for some time on an issue with a MyData machine. Seems that this My9 likes to skip an 0402 placement at a rate of ~ 1000/million. Profile: MyData My9 Mechanical centering Midas only
Electronics Forum | Tue Jul 10 16:13:52 EDT 2007 | bk
Hi folks, I've been bouncing off of MyData > technical support for some time on an issue with > a MyData machine. Seems that this My9 likes to > skip an 0402 placement at a rate of ~ > 1000/million. > > Profile: MyData > My9 Mechanical ce
Electronics Forum | Thu Apr 02 11:41:26 EST 1998 | Scott Cook
| Hello, | We are currently trying to design and ultimately implement a system that will be able to count and manage component placement for three Sanyo chipshooters on three SMT lines. | As the number of components decreases in the reels we want to
Electronics Forum | Mon Jun 25 20:47:09 EDT 2001 | davef
Much of the focus of pick & place machine supplier development efforts seems to directed towards either: * Head location detection, adjustment, and control. OR * Component location prior to pick-up. OR * Component position error correction after pick
Electronics Forum | Fri Sep 09 18:19:25 EDT 2011 | cusackmusic
First of all, if you are going to tell me to throw my crappy equipment away, and buy a better oven because 3 zones isn't enough for lead free soldering, please find another thread to troll in. We have been using a Hotflow 3 for several years for lea
.gif)