Electronics Forum | Thu Aug 06 12:16:52 EDT 1998 | Rin
| I'm currently running a double sided paste smt board loaded with 0603's, on the secondary side. Many of the 0603 devices tombstone during reflow if the parts are not perfectly centered on the pads. Is this caused by the .008 foil thickness? Has any
Electronics Forum | Tue Sep 14 04:56:43 EDT 1999 | Edmund Loh
I am running a board with a lot of 0603 chips ans i'm experience tombstone problem randomly on the board itself. Can anyone out there pls give me advice on how to solve this problem. Thank You.... Rdgs...
Electronics Forum | Fri Aug 07 10:14:43 EDT 1998 | RWW
| I'm currently running a double sided paste smt board loaded with 0603's, on the secondary side. Many of the 0603 devices tombstone during reflow if the parts are not perfectly centered on the pads. Is this caused by the .008 foil thickness? Has any
Electronics Forum | Thu May 29 10:42:40 EDT 2003 | swagner
So is it fair to say that on a moisture laden double sided flex circuit you could see an increase in tombstoning on the 2nd pass due to warpage created by delamination? In other words a 0603 for instance could tombstone due to the delaminated surfac
Electronics Forum | Thu May 29 15:00:49 EDT 2008 | slthomas
We've found that reverse homeplate reduces tombstoning significantly for us on 0603 and 0402 (the latter of which we hardly ever see).
Electronics Forum | Tue Jun 06 17:20:05 EDT 2000 | Travis Slaughter
There is no difference in 0402�s on the bottom side than 0603 0805 1206. They will not fall off or tombstone, unless they where before you put them in the oven.
Electronics Forum | Fri Mar 22 18:16:44 EDT 2013 | vpham
We are trying to use this high-temp solder paste due to a very special process, but we run into tombstones on chip caps, 0402 and 0603. We don't have this problem if we use regular SAC305 solder paste. If you have experience with this type of solde
Electronics Forum | Tue Oct 12 15:20:44 EDT 1999 | Jim Schultz
I need your help! We have been doing double sided surface mount for 4 years now. Up until 6 months ago I have not had a tombstoning problem. Since then I have a fairly high incidence rate of tombstones on the 0603 size resistors (no other parts).
Electronics Forum | Thu Apr 24 23:04:45 EDT 2003 | yukim
I've been struggling with this problem for a while. We have two products: A, which is Ok and B, with tombstone defect (0603 & 0805 capacitor chips). A & B have the same design: pad sizes, separation between pads, components orientation. Both have s
Electronics Forum | Thu Sep 11 20:32:08 EDT 2008 | diesel_1t
I know that most of the problems are called solder issues, this is why i put "solder related" quoted because i have seen more than usual "solderability issues" posted on this forum lately. I had a tombstoning issues with 0603 resistors, on some mat