Electronics Forum | Tue Jun 19 09:02:34 EDT 2001 | Steven Sicard
Hi Does some1 have or know a website that would give me a list of tray definition (Size, Rows/Cols, Nest) so that I could use to help me with a PTF? Thanks!
Electronics Forum | Fri Apr 30 03:36:46 EDT 2010 | aungthura
Hi All Pls advise me about vapor soldering machine if any1 have been using. Thanks in advance
Electronics Forum | Sat Nov 12 21:14:01 EST 2011 | haiae
Hi Mike, I get the trouble again with head one. I realy can not understand why is that. It does not pick component again during I set pick level 3,2 or 1. Have you got any other way to solve it? Thanks,
Electronics Forum | Thu Dec 26 12:41:53 EST 2019 | emeto
We agree with your statements. 1. Having manually printed board will compromise your print and you don't know how much paste you have on each pad. 2. LEDs falling off that easily might be related to contamination, considering that your profile is not
Electronics Forum | Wed Feb 09 22:03:41 EST 2000 | Dave F
Mario: Two ideas: 1 Have you checked-in with the SMTnet PCBCE Mart? It's a very valuable resource for buyers and sellers of equipment. 2 Automated Production Equipment (A.P.E.) 142 Peconic Ave Medford, NY 11763 USA 516-654-1197 Fax: 516-289-4753 h
Electronics Forum | Wed Dec 13 08:28:37 EST 2000 | CAL
1)having the leader tape overlap and taped square is key. 2)making sure the Butt splice of the carrier tape is cut square and come together with no gaps 3) I would put a piece of yellow splice tape on the underside of the carrier tape to help hold th
Electronics Forum | Fri Nov 10 11:05:47 EST 2000 | al Lugo
Hi There are a couple of options that you have: 1) have you tried to open the file using note pad, is it an ascii text format? 2)if it is a ascii file then you can edit the file by just leaving the centroid information. 3)OR call Fuji America at 847.
Electronics Forum | Tue Feb 01 21:53:06 EST 2000 | Dave F
Emmanuel: You have choices to prevent the solder paste from flowing to the second side during reflow: 1 Have your board fabricator plug the vias. 2 Put a temporary solder mask on the secondary side vias. 3 Have your designer relay-out the vias unde
Electronics Forum | Wed Jan 12 13:27:42 EST 2005 | carobin
The two options I see are (not including underfill): 1) Have complete conformal coating coverage of all balls with no webbing in between balls because of CTE mismatches. If all the balls are not coated we see failure in humidity testing. or 2) Sea
Electronics Forum | Thu Oct 02 12:22:26 EDT 2008 | JerryS
Hello Ok there is not much info here. What you have to mae sure of is several key factors. 1. Have you entered the correct stencil thickness. 2. Are you using the stencil gerber (not the paste layer) The paste layer is usually not adjusted for ap
