Industry News | 2011-03-28 11:42:40.0
Lattice Semiconductor Corporation (NASDAQ: LSCC) today announced the immediate availability of three new low cost I/O Breakout Boards: the MachXO™ 2280 Breakout Board, the ispMACH® 4256ZE Breakout Board and the Power Manager II POWR1014A Breakout Board.
Electronics Forum | Fri Oct 10 19:24:53 EDT 2003 | MA/NY DDave
Hi SMTAnet, SMTnet, You already got good answers for how to go forward. I believe that this 50mils is a remnant of the days when we started at 125 mil grids and started the process of going down to 100mil grids, SMT. My gosh who would ever want a 1
Electronics Forum | Mon Aug 18 08:27:35 EDT 2003 | JAMES
Can anyone tell me how thick is too thick for panelization to be used. We have a board current that is 100 mils thick and I was told it can not be panelized. Could anyone tell me if this is true or not.
Electronics Forum | Mon Mar 13 17:04:19 EST 2006 | slthomas
Wow. I'm always just happy to get 100 mils/10 inches from a bare board, let alone
Electronics Forum | Tue Mar 08 02:28:03 EST 2011 | nagesh
I have an issue with PLCC Insufficient Heel solder joint fillet.The aperture dimension is : 30 x 100 mils on PCB & on stencil also(1:1 per gerber).Rohs Process. My stencil thickness is 5mils due to presence of Tssop & QFP package & i cannot increase
Electronics Forum | Tue Jul 07 12:52:02 EDT 1998 | Upinder Singh
Thanks Earl. Well following is the data regarding the product. 1. The panel consists of 21 boards. 2. The surface I mentioned would have 3 SMds and 1 T/hole connector. 3. PCB thickness is 55 mils and the width of the hole on the PCB for the thru-
Electronics Forum | Fri Apr 23 14:14:49 EDT 1999 | Chrys Shea
| Hi everybody, | | I would like to bench mark the quality out of our wave soldering m/c as far as DPPM levels are concerned. Can somebody provide me with some figures at their site or anywhere else for the same. | | Thanks | Upinder | ====== | We
Electronics Forum | Mon Jan 04 23:15:35 EST 1999 | Kris Ewen
Where I worked, we used 0.014" square aperatures (several mfgs. have proven the benefits of square & I've seen a better transfer efficiency myself). Some mfgs use smaller edge lengths & have had success. 0.005" thick stencils give better transfer e
Electronics Forum | Tue Sep 12 16:27:20 EDT 2006 | EK
I'm in the market, also, but vasilating over cost vs performance. I've also used both. In general, the LPKFs have more bells and wistles. On the LPKF S62, I love the tool magazine, and vacuum table. And, the fiducial recognition camera is great o
Electronics Forum | Fri Jan 05 10:15:55 EST 2007 | Cmiller
I have a customer working on a new design of a rather large board that needs to use a micro BGA that will require 8 layers. He needs to use that BGA and it does not come in any other package. He asked me about making the BGA an adapter or daughter bo