New Equipment | Assembly Services
S-Bond Technologies offers both conventional flux soldering and S-Bond soldering. As an Active Solder, S-Bond solder is flux-free eliminating the potential of contamination and corrosion associated with fluxes. Additionally, S-Bond’s limited capillar
New Equipment | Solder Materials
Kapp Copper-Bond Flux™ has been designed for high temperature soldering of all common metals except Aluminum. Kapp Copper-Bond Flux™ is an activated liquid flux containing a mixture of inorganic salts in water, with approximately 50% active ingredien
Electronics Forum | Thu May 11 11:25:56 EDT 2017 | davef
Key to Rosin Fluxes [from SUPERIOR FLUX & MFG. CO.] Type R (Rosin): Non-activated rosin flux for soldering copper. Residues are non-corrosive and non-conductive. Type RMA (Rosin Mildly Activated): Mildly activated rosin flux that contains no chlori
Electronics Forum | Tue Jan 08 17:29:20 EST 2002 | davef
Your research is on track. NC flux needs to reach activation temperature. Also, do not depend on the corrosion characteristics associated with the flux classification (ie, L1, L0, M1, M0, etc.), until the flux is activated by exposure to soldering
Used SMT Equipment | Soldering - Wave
We are looking for overseas distributor / agent for our range of lead free wave soldering machines .The machine includes the following main features: Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted accordi
Industry News | 2003-03-06 08:29:50.0
Coretec experienced sequential growth in sales over the last four quarters and, while its yearly sales did decline, said its sales record still compares favorably
Industry News | 2014-02-03 18:00:07.0
Changing technologies that are driving the electronics industry will be center stage throughout the IPC APEX EXPO® technical conference, which takes place Tuesday, March 25 to Thursday, March 27, 2014, at the Mandalay Bay Convention Center in Las Vegas.
Parts & Supplies | General Purpose Equipment
Special nozzle of LED for YAMAHA YS12 machine We can supply special nozzles for (Gripper nozzle )YAMAHA YG,YV,YX,YS machines , The nozzles for kind of SMD component , Just give me the nozzle size or component 1 KGR-M71N1-A0 NOZZLE 221F ASSY.
Parts & Supplies | Soldering - Wave
Overseas Agent and Distributor Wanted ! Features : Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted according to PCB board width and moving speed to ensure even spraying all time. 2) Durable “Meiji
Technical Library | 2016-12-29 15:37:51.0
The reliabilities of the flux residue of electronic assemblies and semiconductor packages are attracting more and more attention with the adoption of no-clean fluxes by majority of the industry. In recent years, the concern of "partially activated" flux residue and their influence on reliability have been significantly raised due to the miniaturization along with high density design trend, selective soldering process adoption, and the expanded use of pallets in wave soldering process. When flux residue becomes trapped under low stand-off devices, pallets or unsoldered areas (e.g. selective process), it may contain unevaporated solvent, "live" activators and metal complex intermediates with different chemical composition and concentration levels depending on the thermal profiles. These partially-activated residues can directly impact the corrosion, surface insulation and electrochemical migration of the final assembly. In this study, a few application tests were developed internally to understand this issue. Two traditional liquid flux and two newly developed fluxes were selected to build up the basic models. The preliminary results also provide a scientific approach to design highly reliable products with the goal to minimize the reliability risk for the complex PCB designs and assembly processes. This paper was originally published by SMTA in the Proceedings of SMTA International
Technical Library | 2020-11-24 23:01:04.0
The miniaturization trend is driving industry to adopting low standoff components or components in cavity. The cost reduction pressure is pushing telecommunication industry to combine assembly of components and electromagnetic shield in one single reflow process. As a result, the flux outgassing/drying is getting very difficult for devices due to poor venting channel. This resulted in insufficiently dried/burnt-off flux residue. For a properly formulated flux, the remaining flux activity posed no issue in a dried flux residue for no-clean process. However, when venting channel is blocked, not only solvents remain, but also activators could not be burnt off. The presence of solvents allows mobility of active ingredients and the associated corrosion, thus poses a major threat to the reliability. In this work, a new halogen-free no-clean SnAgCu solder paste, 33-76-1, has been developed. This solder paste exhibited SIR value above the IPC spec 100 MΩ without any dendrite formation, even with a wet flux residue on the comb pattern. The wet flux residue was caused by covering the comb pattern with 10 mm × 10 mm glass slide during reflow and SIR testing in order to mimic the poorly vented low standoff components. The paste 33-76-1 also showed very good SMT assembly performance, including voiding of QFN and HIP resistance. The wetting ability of paste 33-76-1 was very good under nitrogen. For air reflow, 33-76-1 still matched paste C which is widely accepted by industry for air reflow process. The above good performance on both non-corrosivity with wet flux residue and robust SMT process can only be accomplished through a breakthrough in flux technology.
DescriptionThe Electrovert® Electra™ is an advanced, meticulously engineered wave soldering system designed for high-mass and high-volume manufacturers. Although intended for maximum throughput requirements, the Electra also offers maximum process fl
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Events Calendar | Tue May 30 00:00:00 EDT 2023 - Tue May 30 00:00:00 EDT 2023 | ,
Ontario Webinar: Microvia Reliability - Understanding the Effects of Process, Design & Materials
Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support
Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.
Liquid Tin Corrosion and Lead Free Wave Soldering Liquid Tin Corrosion and Lead Free Wave Soldering Corrosion of solder pots and solder pot components in wave soldering equipment has been reduced with the introduction of corrosion resistant
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/industries/marine?con=t&page=36
Marine machinery must be able to withstand the rigors of weather, corrosion and intense wear and tear. Whether you need precision paint equipment to improve the efficiency of boat refurbishment and repair or adhesive dispensing and bondtesting equipment to ensure your materials are securely connected, we can help
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/FLOwareGEMInterface_1.2.0.pdf
system initialization. It also refers to the value(s) that specified equipment variables are expected to contain at the end of system initialization. System Initialization The process that equipment performs at power-up, system activation, and/or system
