Electronics Forum | Mon Oct 09 04:24:14 EDT 2006 | Rob
We had one of the crap UP3000's. However it was still better than a 265. If you don't need the extra large board size look for an AP2* or a HiE, especially if you are looking at using paste inspection.
Electronics Forum | Mon Oct 09 20:14:29 EDT 2006 | marcelll
I'm repairing SMT for 20 years and I've worked with both machines. From my experience, I always had a bunch of problems with DEK printer and the service is terrible if your not a big one. MPM is more reliable, parts cheaper & service much better. Pro
Electronics Forum | Tue Nov 28 20:12:41 EST 2006 | davef
We don't have a gap between the lead and the pad after a SM joint is soldered. On our boards, this space is filled with the solder intended to attach the component to the board. How high do components sit above the surface of a board? Most people a
Electronics Forum | Thu Nov 30 16:14:33 EST 2006 | darby
Maybe ask your customer where they got this idea from? It is possible they may have even got this idea from some white paper or article where they are trying to explain something else and show drawings with no solder between the pad and lead. It may
Electronics Forum | Tue Jan 31 10:59:55 EST 2006 | carterhoward
Hi All, I�ve been doing some research on the issue of running lead-free solder paste and leaded solder paste through reflow at the same time. The point with this would be to process all standard leaded components with Lead paste while also processi
Electronics Forum | Tue Jan 31 12:13:26 EST 2006 | Calvin Kolokoy
Today's regular Sn-Pb paste chemistries are designed to run at higher peak temperatures ensuring that your lead-free alloys will coalesce with your regular Sn-Pb solder. That being said, it is do-able to solder both types in one oven. Generally, wit
Electronics Forum | Wed Feb 01 03:38:56 EST 2006 | Jose Luis
Hi all, I'm working in Military Production and then, We have an exception about RoHS (LEAD FREE), but, because we use "normal" components, in this moments, a lot of components have LEAD FREE terminations, and we think that after of 1st July, we wo'nt
Electronics Forum | Wed Mar 08 16:52:07 EST 2006 | darby
Which model Yamhah are you talking about and what is the make and model # of the manifold block for the micro ejectors? If it has the Koganei ME05M series then your local rep can supply the filters. It is a good idea to get spare O-rings for the filt
Electronics Forum | Mon Jun 12 10:46:37 EDT 2006 | mhanc
I am trying to help a customer with a problem. His Process Tech is out and the operator is trying to load a program via floppy. When trying to load on the Amistar 5630 the following errors occur: Data Type Error (level.4) we continue to load and
Electronics Forum | Fri Aug 04 13:33:15 EDT 2006 | Chunks
Hi Phil, It all depends on your product. You say small lot sizes, but are your board 20 by 20 inches in size with 5K parts both top and bottom? If so then even building 3 of these could take you days to build. Then take you weeks to trouble shoot
.png)
