Electronics Forum | Wed Mar 04 14:32:21 EST 2020 | bk
The mot mi board is the first board but it is two boards tied together so you need to undo the screws on the first 2 boards on the left.
Electronics Forum | Wed Jan 06 11:05:13 EST 2021 | greezmky
Thank you rtmitchell, being unfamiliar with the system, I missed that the end is slightly nicked. I pulled a dog out of a machine that has been cannibalized, I verified that it was straight and not nicked, and installed it in our production line mach
Electronics Forum | Thu May 09 10:00:19 EDT 2002 | brianockert
I'd tend to agree with what the others have said. Check the basics, board supports, setup, wiper paper working correctly. If it's a humidity issue, try taking some paste, place it on a chem wipe, and roll it around a bit, which removes some of the mo
Electronics Forum | Wed Aug 26 15:00:08 EDT 2020 | jmelson
That's a rev 1 board, my machine has a rev 2. I have no idea if they are interchangeable. So, I bought a Rev 2 board from Korea. But, I'm flying pretty blind on this. I have traced the ready button signal to a microprocessor pin on the IO_DPRAM bo
Electronics Forum | Mon Sep 27 10:53:24 EDT 2021 | majdi4
Thank you all for your quick reply ! the problem is solved without making any intervention on line .. 0% defect rate for the moment .. for all of you who said "try rotating the board 180 °", we can't do that because the panel contains 2 boards head t
Electronics Forum | Wed Mar 10 14:05:29 EST 2004 | dougt
The 400E has a computer on the bottom of the cabinet with a a Serial/Keyboard Card installed in it. J1 pins 19/20 are the cutters transmit/receive lines on this card, they go through a transition brd and on to the Cutter/Processor brd on the side do
Electronics Forum | Mon Feb 06 13:16:49 EST 2006 | mazink
Hello BOb, Sorry, I wasn't getting your responed because i wasn't log in completlt. I sent an email yesterday which is as follow.. I have a quad machine (QSV 1 PLUS) here and I been having problem with it since 2 month. massege keep coming says 1) B
Electronics Forum | Fri Jul 15 06:20:34 EDT 2005 | skandaae@vsnl.net
PLEASE SUGGST ME FOR A PROBLEM CAUSED DURING MY PROCESS In one of the product I am faceing one component tilt after tht reflow oven 1. check the thkickness of the paste found the paste was more reduse the thickness by adujesting the screenprintg s
Electronics Forum | Tue Jul 19 12:29:20 EDT 2005 | cyber_wolf
How does the mount plane change if the surface of the board is located in the same place every time ? For example: If you put 2 boards side by side on the Y wagon : one board measures .020" and the other .200" the surfaces of the boards are going
Electronics Forum | Fri Feb 03 14:32:59 EST 2006 | mazink
Hello BOb, Sorry, I wasn't getting your responed because i wasn't log in completlt. I sent an email yesterday which is as follow.. I have a quad machine (QSV 1 PLUS) here and I been having problem with it since 2 month. massege keep coming says 1) B